Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Ford Capri Mk3 Bucket Seat Guide

Capri Mk3: match period seat style to the actual fitting assembly

The Capri Mk3 can take a period-style fixed-back seat or a base-mounted Corbeau recliner as part of a correctly specified assembly. Start with the exact seat and the current FORDCAPRI sliding-kit order. Include the present lower fittings in the enquiry.

The Mk3 has its own Historic weld-in cage references, while the Safety Devices bolt-in range separates cars by roof specification. Compare those choices with the seat and restraint plan. The shared Mk2/Mk3 seat-frame listing does not make every other component interchangeable.

Garreth can compare classic and reclining seat support with the driver. Cameron can assess height, reach and useful movement in the actual car. Include any previous seat conversion or restoration work.

At a glance

  • European Capri Mk3 1978-1986; actual build and supplied kit application confirmed.
  • One current published lower-frame family: Corbeau FORDCAPRI.
  • Required seating-position selection and Slide subframe option.
  • Corbeau base-mounted classic or reclining seats; side-mounted shells excluded.
  • Itemise the kit and runners before adding separate upper parts.
  • Cages depend on actual roof, selected package and generation-specific documents.

Identify the Mk3 and its existing seat arrangement

Ford’s timeline identifies the Capri Mk3 as the 1978 to 1986 generation, with its four round headlamps and revised front styling. This is the European coupe covered here. An earlier Mk2 or a modern electric Capri needs its own identification.

Include the actual model and build details when asking about seats, including a 2.8 injection or Capri 280 where relevant. Describe the seats and lower fittings currently in the car. A familiar trim name does not establish that the mounting area is still original.

Decide whether you want a period fixed-back bucket or the adjustment of a reclining sport seat. Garreth can compare support and trim with the driver. Cameron can assess the complete position, operating clearances and access.

Start with the two required Corbeau order choices

FORDCAPRI is the current shared Mk2/Mk3 shop frame listing. Select its required Drivers Side or Passenger Side choice. Slide subframe is the only mechanism currently offered on that order.

For an RHD Capri, identify physical right as the driver position and physical left as the passenger position. State the actual steering arrangement if it differs. Have the full supplied reference confirmed against that physical side and the actual car.

The listing supplies one subframe per seat position. Two replacement seats need two correctly specified lower assemblies. Include the exact Corbeau seat version in the quotation.

Specify the sliding assembly before adding more runners

Corbeau’s current general subframe guidance includes double-locking runners. Start with the selected Slide subframe option and ask for the actual supplied contents to be itemised. Establish what is included before adding separate universal runners.

This route is for Corbeau base-mounted reclining and classic seats. Both the shop description and maker guidance exclude side-mounted shells. A side-mounted FIA bucket needs a different permitted lower system and its own installation plan.

The seat and lower kit still need matching at their actual fixing interfaces. The Capri frame listing does not give a complete numerical seat pattern. Obtain the relevant supplied drawings and installation instructions for the chosen assembly.

Capri Mk3 order checks
ItemCurrent reference or choiceConfirm before ordering
VehicleEuropean Capri Mk3 1978-1986Actual build, body and present mounting area
FrameFORDCAPRIExact supplied reference and physical seating side
Required positionDrivers Side or Passenger SideActual steering arrangement, including imports or conversions
Required mechanismSlide subframeItemised complete kit; no assumed separate tilting option
RunnersCorbeau general guidance includes double-locking runnersActual kit contents before extra runners are added
Base-mounted seatExact Corbeau Classic or reclining versionBoth fixing interfaces and supplied instructions
Roof / cageF008 no sunroof / F010 with sunroofActual roof and full or rear-only package
Historic weld-inFC/3/11C or FC/3/11TCorrect generation, supplied documents and intended event

Compare classic fixed-back seats in the Mk3 cabin

GT8 Highback, GT4 and Classic are the base-mounted fixed-back Corbeau options shown here. They offer different backrest shapes and trim choices for a period cabin. Match the actual supplied version to the Capri lower assembly before ordering.

The Classic has Standard and Excel width choices, with or without a headrest. GT4 and GT8 have their own trim and eyelet options. Compare the actual shoulder shape and headrest position rather than choosing from the period appearance alone.

These listings state Road and Track use, without FIA competition-seat homologation. Their attributes show 291 x 330 mm and 345 x 271 mm base-pattern references. Confirm the supplied seat version and mating assembly; those two patterns are not interchangeable.

Plan useful movement and rear-seat access with a recliner

The standard-base RRS order shown below supplies two reclining seats. Each position needs its own correctly selected Capri fitting assembly. Seat-pair pricing or quantity does not include those vehicle-specific parts.

RRS Low Base is the single-seat alternative, with a required side choice and separate trim options. Its listed patterns are 291 x 330 mm and 345 x 271 mm. Confirm the exact supplied connection and trial the assembled height before choosing the base version.

Sportsman is the compact classic-style recliner, listed at 291 x 330 mm on its base. Compare the support and actual headrest version with the driver. Include the useful backrest movement, release-handle access and rear-seat access in the trial.

F008: choose the correct non-sunroof cage order

Safety Devices lists F008 for Capri Mk2 1974-1978 and Mk3 1978-1986 without a sunroof. Identify the actual roof and body before selecting it. A shared seat-frame listing does not remove the cage roof distinction.

The full-cage shop order has six front-and-rear bundle choices. The selection determines the rear diagonal, harness-bar provision and whether door bars are included. Itemise the complete selected bundle with the order.

The separate rear-cage listing has three rear-section designs. It does not supply the front section or door bars. Match the complete cage documents and fitting work to the intended use.

F010: use the sunroof-specific family where applicable

The F010 maker application identifies the same Mk2 and Mk3 year ranges with a sunroof. State any roof alterations with the enquiry. Do not substitute the F008 reference without the actual application being checked.

F010 also has a full-cage bundle order and a separate rear-cage order. Confirm the diagonal, harness bar and door-bar choices from the selected package. A rear-only order is not a full six-point cage.

Safety Devices states that the front cage requires a slight dashboard modification on the driver’s side. Its listed mounting areas are the floor and rear wheel arches. Confirm all required fitting-plate and installation work from the supplied instructions.

Use the Mk3-specific Historic weld-in cage references

For the Mk3, the Custom Cages Historic references are FC/3/11C in CDS and FC/3/11T in T45. The separate Mk2 FC/2/11 kits are not the order to substitute from a shared seat-frame name. Confirm the actual body and supplied cage reference together.

The current maker titles describe the Mk3 kits as MS UK Compliant to Appendix K. Establish the required paperwork and installation conditions for the actual event. A material choice or general FIA-compliant category does not establish every approval.

Plan the weld-in work before completing the interior. Custom Cages describes footplates, fitting documents and a weld-test sample among the kit contents. Assess the cage with the seat position and the proposed restraint path.

Check the restraint path with the exact seat version

Have the original belt and buckle arrangement assessed with the replacement seat. Check buckle access and the belt path with the driver seated. A Corbeau frame application does not approve the whole restraint installation.

TRS Clubman three-point bolt-in and four-point clip-in are Road and Track harness options for a separate assessment. Use the exact restraint instructions for angles and attachments. The number of straps does not establish suitable factory anchors.

Classic seat versions can differ in their harness openings and headrest arrangements. Confirm the supplied seat and permitted belt route before choosing a harness. A cage harness bar does not establish every other attachment.

Check the present floor fittings before changing the seat

Inspect the current lower fittings with the installer before ordering the new assembly. A previous seat swap or replacement floor panel needs recording. Have the actual connections compared with the supplied Capri kit.

Trial the regular driver at the finished height and reach. Check the door and centre-area clearance through the useful sliding range. Include the recline controls, buckle access and any required rear-seat access.

Fit the components using their supplied orientation, hardware and tightening instructions. Confirm the permitted belt route in that installed position. Have the completed installation assessed before the car is used.

Send the Mk3 details for a complete fitting quotation

Send Garreth the actual Capri Mk3 build details and steering arrangement. Include the exact seat version and the physical side being changed. Photographs of the existing seats and lower mounting area help identify previous work.

Cameron can compare the complete proposed position with your intended use. List parts already owned and any required rear access. Include the roof specification if a cage is part of the build.

  • Actual European Mk3 identity and build details, including any later registration.
  • Physical seating side and required Drivers Side or Passenger Side order choice.
  • Selected Corbeau seat version and an itemised Slide subframe assembly.
  • Seat quantity, mounting-area changes, required access and restraint proposal.
  • For a cage: actual roof, full or rear-only package and generation-specific documents.

Common questions

Which Capri does this guide cover?

Ford's European Mk3 generation identified as 1978-1986; send actual build details and the current seat arrangement for the fitting enquiry.

Does a 2.8 injection or Capri 280 name settle the fitting order?

Identify the actual car, existing lower fittings, roof and intended seat version; the trim name alone does not establish the complete installation.

Which frame order choices are required?

Choose Sport Seat Position and the currently offered Slide subframe mechanism, then have the exact supplied assembly confirmed.

How should I describe the seating side?

State physical right or left with the actual steering arrangement; do not rely on a driver/passenger label alone for an imported or converted car.

Is a tilting subframe currently an order option?

The current Capri listing offers Slide subframe only; discuss the actual access requirement instead of assuming a separate tilting kit is available.

Does one subframe order supply both positions?

It supplies one seat position; specify two complete position-correct assemblies when changing both seats.

Should I add another set of universal runners?

Corbeau's general kit guidance includes double-locking runners; confirm the actual supplied Slide subframe contents before adding further parts.

Can this frame be used for a side-mounted FIA shell?

The shop and Corbeau guidance exclude side-mounted seats from this route; such a shell requires a different permitted lower system.

Are the listed seat-base patterns interchangeable?

No; confirm the actual supplied drawing and mating interfaces where the listings show 291 x 330 mm and 345 x 271 mm.

Are all Classic seats supplied with a headrest?

The current shop listing has with-headrest and no-headrest versions, plus width choices; identify the exact version before the fitting trial.

Does Low Base guarantee the finished driving height?

The complete seat, slider and vehicle-frame assembly determines the installed position; trial it with the regular driver.

What does the RRS pair listing supply?

Two seats; position-correct vehicle frames and the complete fitting parts are specified separately.

Which Safety Devices family is for a car without a sunroof?

F008 is the named non-sunroof family, while F010 is the sunroof family; confirm the actual body and roof with the order.

Do all full-cage bundles include the same bars?

No; the selected bundle determines the rear diagonal, harness-bar provision and whether door bars are included.

Does a rear-cage order include the front cage?

The rear-only listing supplies the selected rear section, not the front cage or door bars.

Does the front cage require dashboard work?

Safety Devices states a slight dashboard modification on the driver's side; confirm all fitting work from the actual supplied instructions.

Which Custom Cages references are for the Mk3?

FC/3/11C is the CDS Historic kit and FC/3/11T is T45; the Mk2 FC/2/11 family is a separate order.

Does T45 material prove event eligibility?

Check the actual design, supplied documents and event requirements; material choice alone does not approve a cage or complete installation.

Do the harness examples prove the factory anchors are suitable?

No; follow the exact restraint instructions and assess the actual attachments, belt path and seat configuration.

Can I keep access to the rear seats with an RRS pair?

Trial the completed driver and passenger assemblies, useful backrest and sliding movement, and any cage bars against the access you require.

Garreth’s top tip

Compare the GT8 shape with a reclining RRS in the actual Mk3 driving position. Keep the support, headrest and access decisions in the same conversation as the trim. A period appearance is most useful when the complete seat position works for the driver.

Cameron’s fitting view

Record the physical side and the full supplied Corbeau reference with the selected sliding assembly. Check the actual seat connection and lower mounting area. Trial the complete seat, cage and restraint arrangement before the work is finished.

Plan your Ford Capri Mk3 seat change

Drop us an email or open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.

Back to the Car Seat Selector guide.

Manufacturer references: Corbeau subframe guidance, classic seat range, F008 non-sunroof cage, F010 sunroof cage, Custom Cages Mk3 CDS, Custom Cages Mk3 T45, Ford Capri model timeline. Confirm the actual supplied versions and fitting documents with the car and intended use.

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text