Ford Capri Mk2 Bucket Seat Guide
Capri Mk2: classic seat choices and a complete sliding fitting plan
A Capri Mk2 seat change can begin with a period fixed-back bucket or a Corbeau recliner. The current shop fitting route is the Corbeau FORDCAPRI sliding subframe. Choose it with the exact seat version and the actual car.
This guide compares that lower assembly with classic buckets, reclining seats and the separate sunroof and non-sunroof cage families. It keeps the Mk2 Historic weld-in cage references distinct from the later Mk3.
Garreth can compare the support and appearance you want to retain. Cameron can assess the assembled position and access. Send the build details and photographs of any existing fitting changes.
At a glance
- European Capri Mk2 1974-1978; actual build and supplied kit application confirmed.
- One current published lower-frame family: Corbeau FORDCAPRI.
- Required seating-position selection and Slide subframe option.
- Corbeau base-mounted classic or reclining seats; side-mounted shells excluded.
- Itemise the kit and runners before adding separate upper parts.
- Cages depend on actual roof, selected package and generation-specific documents.
Identify the European Capri Mk2 before choosing the seat
Ford’s model timeline identifies the Capri Mk2 as the 1974 to 1978 generation, introduced with a new hatchback tailgate. This guide covers that European coupe. The earlier Mk1, later Mk3 and modern electric Capri need identifying separately.
The current Corbeau frame listing names both Mk2 and Mk3. Send the actual build details with the enquiry instead of using registration year alone. Include photographs of the present seats and their lower mounting arrangement.
A restoration is a useful point to settle the seat specification before choosing its trim. Garreth can compare the support and period appearance with the driver. Cameron can assess the complete mounting assembly and the access you need.
Start with the two required Corbeau order choices
The shop Capri frame reference is FORDCAPRI. Its required Sport Seat Position choice is Drivers Side or Passenger Side. The required mechanism choice currently offers Slide subframe only.
For an RHD Capri, identify physical right as the driver position and physical left as the passenger position. State the actual steering arrangement if it differs. Have the full supplied reference confirmed against that physical side and the actual car.
The listing supplies one subframe per seat position. Two replacement seats need two correctly specified lower assemblies. Include the exact Corbeau seat version in the quotation.
Specify the sliding assembly before adding more runners
Corbeau’s current general subframe guidance includes double-locking runners. Start with the selected Slide subframe option and ask for the actual supplied contents to be itemised. Establish what is included before adding separate universal runners.
This route is for Corbeau base-mounted reclining and classic seats. Both the shop description and maker guidance exclude side-mounted shells. A side-mounted FIA bucket needs a different permitted lower system and its own installation plan.
The seat and lower kit still need matching at their actual fixing interfaces. The Capri frame listing does not give a complete numerical seat pattern. Obtain the relevant supplied drawings and installation instructions for the chosen assembly.
| Item | Current reference or choice | Confirm before ordering |
|---|---|---|
| Vehicle | European Capri Mk2 1974-1978 | Actual build, body and present mounting area |
| Frame | FORDCAPRI | Exact supplied reference and physical seating side |
| Required position | Drivers Side or Passenger Side | Actual steering arrangement, including imports or conversions |
| Required mechanism | Slide subframe | Itemised complete kit; no assumed separate tilting option |
| Runners | Corbeau general guidance includes double-locking runners | Actual kit contents before extra runners are added |
| Base-mounted seat | Exact Corbeau Classic or reclining version | Both fixing interfaces and supplied instructions |
| Roof / cage | F008 no sunroof / F010 with sunroof | Actual roof and full or rear-only package |
| Historic weld-in | FC/2/11C or FC/2/11T | Correct generation, supplied documents and intended event |
Compare classic fixed-back seats in the Mk2 cabin
Corbeau GT4, Classic and GT8 are base-mounted fixed-back choices to discuss with the Capri kit. Their current shop listings are for seats without fitting brackets. Choose the exact version with the driver before settling the trim.
The Classic has Standard and Excel width choices, with or without a headrest. GT4 and GT8 have their own trim and eyelet options. Compare the actual shoulder shape and headrest position rather than choosing from the period appearance alone.
These listings state Road and Track use, without FIA competition-seat homologation. Their attributes show 291 x 330 mm and 345 x 271 mm base-pattern references. Confirm the supplied seat version and mating assembly; those two patterns are not interchangeable.
-
From £360.00 Incl. VATFrom £300.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £348.00 Incl. VATFrom £290.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £510.00 Incl. VATFrom £425.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Plan useful movement and rear-seat access with a recliner
Sportsman is the compact, classic-style reclining choice here. Its current shop listing specifies base mounting at 291 x 330 mm. Select the seating side and actual headrest and trim version with the fitting assembly.
RRS Low Base is a single-seat order with a required seating-position selection. Its attributes list 291 x 330 mm and 345 x 271 mm. The Low Base name does not establish the final height after the complete vehicle kit is fitted.
The standard-base RRS listing below supplies two seats. Specify a complete lower assembly for each position. Trial the useful sliding and backrest movement in the actual Capri, including the rear access you intend to retain.
-
From £468.00 Incl. VATFrom £390.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £498.00 Incl. VATFrom £415.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
F008: choose the correct non-sunroof cage order
Safety Devices lists F008 for Capri Mk2 1974-1978 and Mk3 1978-1986 without a sunroof. Identify the actual roof and body before selecting it. A shared seat-frame listing does not remove the cage roof distinction.
The full-cage shop order has six front-and-rear bundle choices. The selection determines the rear diagonal, harness-bar provision and whether door bars are included. Itemise the complete selected bundle with the order.
The separate rear-cage listing has three rear-section designs. It does not supply the front section or door bars. Match the complete cage documents and fitting work to the intended use.
-
From £858.00 Incl. VATFrom £715.00 Excl. VATPayPal CreditMade to orderKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £498.00 Incl. VATFrom £415.00 Excl. VATPayPal CreditMade to orderKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
F010: use the sunroof-specific family where applicable
The F010 maker application identifies the same Mk2 and Mk3 year ranges with a sunroof. State any roof alterations with the enquiry. Do not substitute the F008 reference without the actual application being checked.
F010 also has a full-cage bundle order and a separate rear-cage order. Confirm the diagonal, harness bar and door-bar choices from the selected package. A rear-only order is not a full six-point cage.
Safety Devices states that the front cage requires a slight dashboard modification on the driver’s side. Its listed mounting areas are the floor and rear wheel arches. Confirm all required fitting-plate and installation work from the supplied instructions.
-
From £858.00 Incl. VATFrom £715.00 Excl. VATPayPal CreditMade to orderKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £498.00 Incl. VATFrom £415.00 Excl. VATPayPal CreditMade to orderKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Keep the Mk2 Historic weld-in references together
The Custom Cages Mk2 Historic choices are FC/2/11C in CDS and FC/2/11T in T45. They are separate from the Mk3 FC/3/11 family. Use the exact generation and supplied reference when asking about either kit.
The current maker pages describe these as MS UK Compliant to Appendix K. Confirm the actual supplied design and paperwork against the intended event. Neither the material name nor a general cage category establishes eligibility for every competition.
Plan the weld-in installation and required documentation with the installer before choosing a finish for the cabin. The maker describes fitting documents, footplates and a weld-test sample among its kit contents. Assess the seat, cage and restraints in the same proposed driving position.
Check the restraint path with the exact seat version
Have the original belt and buckle arrangement assessed with the replacement seat. Check buckle access and the belt path with the driver seated. A Corbeau frame application does not approve the whole restraint installation.
TRS Clubman three-point bolt-in and four-point clip-in are Road and Track harness options for a separate assessment. Use the exact restraint instructions for angles and attachments. The number of straps does not establish suitable factory anchors.
Classic seat versions can differ in their harness openings and headrest arrangements. Confirm the supplied seat and permitted belt route before choosing a harness. A cage harness bar does not establish every other attachment.
-
From £96.00 Incl. VATFrom £80.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £120.00 Incl. VATFrom £100.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
Inspect the mounting area before the restoration is finished
Have the installer inspect the actual lower mounting area. Include replacement floor panels, repairs and any previous seat conversion. Resolve the condition of those connections before assembling the new seat.
Trial the regular driver in the complete seat and sliding assembly. Check steering-wheel and pedal reach through the useful travel. Include door and centre-area clearance, the release handle, backrest controls and buckle access.
Follow the supplied instructions for orientation, hardware and tightening. Check any required rear-seat access with the finished assembly. Have the completed installation assessed before the car is used.
Send the Mk2 details for a complete fitting quotation
Send Garreth the actual Capri Mk2 build details and steering arrangement. Include the exact seat version and the physical side being changed. Photographs of the existing seats and lower mounting area help identify previous work.
Cameron can compare the complete proposed position with your intended use. List parts already owned and any required rear access. Include the roof specification if a cage is part of the build.
- Actual European Mk2 identity and build details, including any later registration.
- Physical seating side and required Drivers Side or Passenger Side order choice.
- Selected Corbeau seat version and an itemised Slide subframe assembly.
- Seat quantity, mounting-area changes, required access and restraint proposal.
- For a cage: actual roof, full or rear-only package and generation-specific documents.
Common questions
Which Capri does this guide cover?
The European Mk2 generation identified in Ford's timeline as 1974-1978; confirm the actual car and supplied kit application, including cars registered later.
Does a Mk1 or modern electric Capri use this fitting plan?
The current FORDCAPRI listing names Mk2/Mk3; it does not establish the earlier Mk1 or modern electric vehicle application.
Which frame order choices are required?
Choose Sport Seat Position and the currently offered Slide subframe mechanism, then have the exact supplied assembly confirmed.
How should I describe the seating side?
State physical right or left with the actual steering arrangement; do not rely on a driver/passenger label alone for an imported or converted car.
Is a tilting subframe currently an order option?
The current Capri listing offers Slide subframe only; discuss the actual access requirement instead of assuming a separate tilting kit is available.
Does one subframe order supply both positions?
It supplies one seat position; specify two complete position-correct assemblies when changing both seats.
Should I add another set of universal runners?
Corbeau's general kit guidance includes double-locking runners; confirm the actual supplied Slide subframe contents before adding further parts.
Can this frame be used for a side-mounted FIA shell?
The shop and Corbeau guidance exclude side-mounted seats from this route; such a shell requires a different permitted lower system.
Are the listed seat-base patterns interchangeable?
No; confirm the actual supplied drawing and mating interfaces where the listings show 291 x 330 mm and 345 x 271 mm.
Are all Classic seats supplied with a headrest?
The current shop listing has with-headrest and no-headrest versions, plus width choices; identify the exact version before the fitting trial.
Does Low Base guarantee the finished driving height?
The complete seat, slider and vehicle-frame assembly determines the installed position; trial it with the regular driver.
What does the RRS pair listing supply?
Two seats; position-correct vehicle frames and the complete fitting parts are specified separately.
Which Safety Devices family is for a car without a sunroof?
F008 is the named non-sunroof family, while F010 is the sunroof family; confirm the actual body and roof with the order.
Do all full-cage bundles include the same bars?
No; the selected bundle determines the rear diagonal, harness-bar provision and whether door bars are included.
Does a rear-cage order include the front cage?
The rear-only listing supplies the selected rear section, not the front cage or door bars.
Does the front cage require dashboard work?
Safety Devices states a slight dashboard modification on the driver's side; confirm all fitting work from the actual supplied instructions.
Which Custom Cages references are for the Mk2?
FC/2/11C is the CDS Historic kit and FC/2/11T is T45; the Mk3 FC/3/11 family is separate.
Does T45 material prove event eligibility?
Check the actual design, supplied documents and event requirements; material choice alone does not approve a cage or complete installation.
Do the harness examples prove the factory anchors are suitable?
No; follow the exact restraint instructions and assess the actual attachments, belt path and seat configuration.
Will a recliner automatically preserve rear-seat access?
Trial useful slider and backrest movement in the actual car, with the seat and any cage installed in their proposed positions.
Garreth’s top tip
Compare the Classic, GT4 and GT8 with the driver before matching the piping to the Mk2 interior. Decide whether useful backrest adjustment and rear access matter more for your use. Settle the actual seat version before the final trim order.
Cameron’s fitting view
Record the physical side and the full supplied Corbeau reference with the selected sliding assembly. Check the actual seat connection and lower mounting area. Trial the complete seat, cage and restraint arrangement before the work is finished.
Plan your Ford Capri Mk2 seat change
Drop us an email or open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Manufacturer references: Corbeau subframe guidance, classic seat range, F008 non-sunroof cage, F010 sunroof cage, Custom Cages Mk2 CDS, Custom Cages Mk2 T45, Ford Capri model timeline. Confirm the actual supplied versions and fitting documents with the car and intended use.











