Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Dodge Viper Third Generation (2003-2006) Bucket Seat and Fitting Guide

Choose seats and fitting parts for your third-generation Viper

For a third-generation Dodge Viper, Planted lists SB163 within its shared third/fourth-generation 2003-2010 application. This guide focuses on the 2003-2006 cars and the checks needed around the actual seat installation.

Garreth would start with how the Viper is used and try the driver in both a supportive recliner and a fixed bucket. Include entry and exit in that choice. We can then work through the preferred seat and its fitting assembly together.

Cameron wants the exact body and roof details alongside photographs of the current lower assembly. Identify equipment beneath the seat before planning the replacement. Confirm the physical side and supplied runner pattern on the full SB163 reference.

At a glance

  • Guide focus: third-generation Viper, 2003-2006 cars.
  • Listed bracket family: SB163 within Planted’s shared 2003-2010 third/fourth-generation application.
  • Physical left: SB163DR Standard or COBRA-SB163DR Alternate.
  • Physical right: SB163PA Standard or COBRA-SB163PA Alternate.
  • Include the actual roof, adjustment range and equipment beneath the seat in the trial.
  • A body or model-year reference does not independently approve every complete fitting combination.

Confirm the generation and the car you are changing

Dodge’s original 2003 material introduces the SRT-10 as a new convertible, while its 2006 specifications separately describe a coupe. Give us the actual body and roof arrangement with the chassis and model year. The 2003 model was offered from autumn 2002, so a calendar or first-registration year alone is not enough to identify the car.

Planted’s SB163 title groups the third and fourth generations within 2003-2010. Confirm the actual third-generation car and supplied part. The earlier second-generation listing uses SB132.

Specify the complete assembly above the SB163 bracket

The linked SB163 listing has RHD Driver Side and RHD Passenger Side options. Specify the actual physical side and full reference for the car, then confirm the supplied runner pattern. Have the quotation itemise the floor bracket, runners, any supports and the hardware required for the chosen seat.

Each position needs its own confirmed assembly when changing both seats.

Match the physical side to the full manufacturer code

Planted names SB163DR Driver / Left and SB163PA Passenger / Right. The shop uses RHD position labels, so an LHD driver needs physical left from the SB163DR family, corresponding to its RHD Passenger Side choice. Confirm the actual supplied part and the car’s mounting arrangement.

Cameron would put the physical side beside each full reference on the quotation. Add the actual steering arrangement and any conversion details. Specify each seat position separately.

Third-generation Viper SB163: physical side and manufacturer pattern
Physical sideStandardAlternatePosition to confirm
LeftSB163DRCOBRA-SB163DRRHD passenger / LHD driver
RightSB163PACOBRA-SB163PARHD driver / LHD passenger

Choose the supplied pattern with the runner

Specify the supplied Standard or Alternate pattern with the exact runner. Standard includes the Recaro slider layout; Alternate substitutes Cobra / Scheel-Mann for it. Selecting a physical side in the shop does not independently select an Alternate bracket. Confirm the lower runner-to-SB163 fixings and the upper connection to the seat or supports before ordering.

Compare fixed buckets with the driver and door opening

The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E are fixed buckets to compare with the driver. Choose the exact version and permitted mounting method before settling the support arrangement. Garreth would trial a higher bolster through the actual door opening before choosing it for regular road use. Include the driver’s clothing and the helmet used on track where relevant. Check shell width and shoulder clearance with the roof and trim fitted.

Try a recliner for a Viper used regularly on the road

Try the Sparco R100, Corbeau Sportline RRS and Cobra Misano Anniversary as reclining alternatives. Compare the cushion and back support with the regular driver, then assess the exact base fixing arrangement. Trial recline and adjustment controls against the actual bulkhead, trim and equipment behind the seat.

The RRS listing is a pair of seats. The lower fitting assembly for each position is specified separately.

Confirm the Cobra runner layout and handle access

The Cobra Premium runner kit has handle-type choices to specify with the exact seat. Check the full lower fixing layout against the supplied SB163. Planted distinguishes Narrow and Wide Cobra slider patterns, which cannot be identified from the handle description alone. Trial operation with the actual console and trim.

Plan the adjustment needed by the regular drivers

The Sparco sliding kit is another runner option to check with the selected seat. Match its lower fixings to the supplied bracket and its upper fixings to the seat or supports. Trial the travel needed by each regular driver and confirm that both runners lock correctly.

Include usable handle access when checking the finished position.

Choose supports around the exact side-mounted shell

For a side-mounted shell, assess the linked Sparco steel supports against its fixing geometry and permitted hardware. Confirm the support-to-runner or lower-bracket connection before choosing the final height and tilt. Include all those parts when measuring the seat in the car.

Leaving runners out calls for a separately specified attachment plan.

Check the driving position with the roof and adjustment equipment

Trial the full seat assembly with the regular driver and the car’s roof in its normal closed position. Check visibility and head clearance, then pedal, steering-wheel and gear-lever reach. Dodge’s 2003 material describes adjustable pedals, so include the actual pedal equipment fitted to the car in that trial. Check the shell against the closed door and console throughout the travel you need.

Measure the complete installation before describing it as lower than the original seat.

Check the space beneath the seat before choosing the finished height

Dodge’s 2003 technology publication identifies an under-seat audio amplifier. Photograph the equipment actually present, including previous audio changes, before the original seat is removed. Have the installer assess clearance for the new lower assembly and its movement, with wiring and connectors accounted for.

Record the original buckle attachment and the rest of the seat-related equipment with those photographs.

Choose the restraint arrangement alongside the seat

Have the original belt and buckle arrangement assessed with the selected seat fitted. Agree how the existing attachments and belt path will work with the proposed assembly.

For a harness installation, identify the exact harness model and intended use first. Suitable vehicle anchors and routing need assessment under its instructions and the relevant event requirements. The shell’s belt openings are not vehicle anchors.

Trial the supplied lower bracket before building upwards

Trial the bare supplied SB163 against the actual floor attachments before adding the runner and seat. Check its full reference and supplied pattern, including any previous floor repairs or adapters. Confirm space around equipment beneath the seat as the assembly is built.

Use the exact component instructions and specified hardware. Trial the finished position, adjustment and restraints before final tightening and completion of the installer’s agreed checks.

Send the details needed for a complete Viper quotation

Clear mounting photographs and visible part labels help us specify the lower assembly. Include the seat you prefer and the parts proposed for reuse.

  • Chassis, model year, original market and actual body and roof arrangement.
  • Steering configuration and physical seat position.
  • Existing floor attachments, repairs and previous seat adapters.
  • Equipment beneath the seat, buckle attachments and wiring photographs.
  • Full SB163 side reference, supplied runner pattern and required travel.
  • Chosen seat, driver requirements, pedal equipment and intended use.

Common questions

It focuses on the third-generation 2003-2006 cars within Planted’s named shared SB163 third/fourth-generation 2003-2010 application.

Dodge stated that the 2003 SRT-10 would go on sale in autumn 2002, so use the chassis and model-year details alongside the registration information.

Give us the actual body and roof details and mounting photographs for assessment; the application title does not approve every completed installation.

State physical left and LHD beside the SB163DR family reference, then confirm the supplied part against the actual car.

SB163DR is Standard physical left; COBRA-SB163DR is the Alternate physical-left pattern.

SB163PA is Standard physical right; COBRA-SB163PA is the Alternate physical-right pattern.

Alternate substitutes Cobra / Scheel-Mann for the Standard Recaro slider pattern and must be specified separately from the physical side.

Confirm each position’s full lower assembly separately, including runners, supports and hardware for the exact seats.

The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E are linked options to compare with the driver, exact mounting method and cabin clearance.

Try the linked Sparco R100, Corbeau Sportline RRS pair and Cobra Misano Anniversary with the actual driver and usable adjustment space.

The linked product supplies two seats. Have the confirmed lower assembly for each position specified separately.

Send their exact references and photographs so the lower and upper fixing interfaces can be checked with the proposed installation.

Confirm the exact runner layout with the supplied SB163, because Planted distinguishes Narrow and Wide Cobra slider patterns separately from a handle description.

Check its lower bracket connection, upper seat or support connection, handle access and operation of both locking runners.

A shell using side fixings needs suitable supports with a confirmed connection to the selected runner or lower bracket.

Have a fixed installation specified separately; removing runners changes the attachment layout and does not establish fixing alignment.

Measure the complete assembly with the selected seat. There is no single lowering amount for every combination.

Dodge’s 2003 technology document identifies an under-seat amplifier. Include the actual equipment and wiring present in the assessment of the new assembly and its movement.

Have the actual belt attachments, buckle and routing assessed with the selected seat and the car’s original restraint equipment.

The exact harness needs suitable vehicle anchors and routing assessed under its instructions and intended use. Seat openings or a general provision do not specify that completed assembly.

Include full details and photographs so the installer can assess the actual equipment and attachments before the assembly is specified.

Send the chassis and model year, market, trim, body, roof and steering details, physical positions, mounting and equipment photographs, chosen seat and intended use.

Garreth’s top tip

I would try entry as well as support before committing to a seat. Include the roof position and the kit the driver wears on track. Bring that choice to us and we can work through the seat and its full fitting assembly.

Cameron’s fitting view

Take clear photographs beneath the original seat before dismantling it. Identify the floor attachments and any amplifier or other equipment that occupies the space. Then confirm the full SB163 reference and trial the new assembly through its required adjustment.

Plan your Dodge Viper third generation (2003-2006) seat change

Drop us an email or open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.

Back to the Car Seat Selector guide.

Application sources: Planted physical-left SB163 bracket, physical-right SB163 bracket, installation guidance and FAQs. Vehicle references: Dodge’s 2003 overview, 2003 technology publication and 2006 coupe specifications. Confirm the exact car and supplied fitting assembly.

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text