Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Dodge Neon Second Generation (2000-2005) Bucket Seat and Fitting Guide

Build a supportive driving position in your second-generation Neon

The MY2000-2005 second-generation Dodge Neon falls within Planted’s named 1994-2005 SB037 application. Confirm the exact generation and supplied side before choosing the seat and upper fittings.

Garreth would choose the seat around the driver’s support and adjustment needs. Try a fixed bucket and a recliner before settling on either. Tell us how the car is used so the quotation can cover the whole assembly.

Cameron’s starting point is the full bracket code beside the physical seating position. Include the actual market and steering arrangement. An SRT-4 or a previous seat conversion needs its own details in that enquiry.

At a glance

  • Scope: MY2000-2005 second-generation Neon within the maker’s 1994-2005 application.
  • Listed lower route: Planted SB037, with the actual physical side and supplied pattern to confirm.
  • Physical left: SB037DR Standard or COBRA-SB037DR Alternate.
  • Physical right: SB037PA Standard or COBRA-SB037PA Alternate.
  • Include the actual trim, market and any SRT-4 or previous-conversion details.
  • Specify the seat, runners, supports, hardware and restraint assessment as one complete installation.

Identify the MY2000 redesign before choosing the kit

This guide covers the MY2000-2005 second-generation portion of Planted’s named 1994-2005 Dodge Neon application. DaimlerChrysler’s original 1998 annual report describes the redesigned 2000 model and its arrival at dealers in the first quarter of 1999. Confirm the actual model year and generation using the car’s build details.

Send the trim, original market and steering arrangement with photographs of the current seats and floor mountings. Include an SRT-4 or any previous conversion explicitly. The broad Neon listing does not establish every derivative’s complete seat and restraint installation.

Start with the Planted SB037 lower bracket

The linked Planted SB037 is the vehicle-specific lower fitting route listed for the Dodge Neon within the manufacturer’s 1994-2005 application. Choose the physical seat position first. Have the full supplied reference and runner pattern written on the quotation before selecting the parts above it.

The floor bracket, any sliding runners, seat supports and hardware need to form one specified assembly.

Specify the physical side beside the full reference

The manufacturer names SB037DR for physical left and SB037PA for physical right. Its Driver / Left and Passenger / Right descriptions follow that physical arrangement; the shop uses RHD seat-position labels. On an LHD car the driver is on the left, so include the actual steering arrangement when asking for a kit.

Cameron would put the physical side and complete part code on the order together. Confirm the actual supplied version against the car’s floor and the chosen runner. Order two separately specified positions when changing both seats.

Neon SB037: physical side and manufacturer pattern
Physical sideStandardAlternatePosition to confirm
LeftSB037DRCOBRA-SB037DRRHD passenger / LHD driver
RightSB037PACOBRA-SB037PARHD driver / LHD passenger

Choose Standard or Alternate with the exact runner

Planted’s Standard pattern includes the Recaro slider layout. Alternate replaces that layout with Cobra / Scheel-Mann. These are manufacturer pattern choices, separate from the physical side. The shop’s seat-position selector does not independently choose an Alternate version. Have the runner’s lower fixings checked against the supplied bracket and its upper fixings against the seat or supports.

Try fixed buckets before specifying the upper fittings

The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E are fixed-back seats to compare with the driver. Confirm the exact version and its permitted base or side fixing arrangement before building a fitting kit. Try the lower bolsters and shoulder support with the door closed. Include pedal reach, gear selection and access to the belt buckle. Garreth would compare entry and comfort with a supportive recliner as well as judging the support needed on track.

Compare reclining seats for regular road use

The Sparco R100, Corbeau Sportline RRS and Cobra Misano Anniversary provide reclining alternatives to try. Check the actual seat’s base fittings and space for its controls alongside the console and door. Trial backrest movement through the range you need before finalising the kit. The linked RRS product is a pair of seats, so specify a separate lower assembly for each position.

Match the Cobra runner version to both interfaces

The Cobra Premium runner listing has handle-type options. Give us the actual runner reference with the seat and bracket choices. Planted distinguishes Narrow and Wide Cobra slider patterns, so a handle-width label alone does not establish the lower fixing layout. Confirm the supplied Standard or Alternate bracket and runner together.

Check adjustment with the complete seat assembly

The Sparco sliding runner kit is another option to assess with the chosen seat. Match its upper connection to the seat or supports and its lower connection to the supplied SB037. Trial the required travel with both runners locking correctly and the handle accessible.

Measure the finished seating position with every agreed component in place.

Add suitable supports for a shell using side fixings

The linked Sparco steel side mounts are an option to assess for a side-mounted shell. Check the exact shell’s fixing geometry and permitted hardware, then confirm the connection to the runner or lower bracket. A fixed installation without runners needs its own attachment plan.

Removing the runner changes the layout and does not establish that the remaining holes align.

Trial the driving position with the door closed

Trial the completed seat in the second-generation cabin with the regular driver. Check the actual console and door trim around the bolsters, alongside pedal reach, steering clearance and gear selection. Include any modified controls, roll structure and the helmet used on track. Measure the finished seating height with all agreed parts in place.

No universal lowering amount follows from choosing the SB037 bracket.

Record the original seat and restraint equipment

Record the original seat, buckle arrangement and any wiring on the exact second-generation car. Include trim-specific equipment, previous seat conversions and any SRT-4 details in the fitting enquiry. Have a qualified installer assess affected electrical and restraint components using the correct vehicle information.

The mechanical lower bracket does not establish how the original seat equipment will be retained.

Choose the restraint arrangement alongside the seat

Have the existing belt attachments, buckle access and routing assessed with the selected seat fitted. Include the actual vehicle equipment and agree the completed checks before work starts.

For a harness, specify the exact model and intended use before deciding on attachments. Its routing and vehicle anchors need assessment with the seat under the relevant instructions and event requirements. Harness openings in the shell do not provide anchors in the Neon.

Trial the bare bracket before building the seat upwards

Check the supplied full part reference and compare the bare bracket with the actual floor attachments. Include repairs, previous adapters and any difference from the reference application before adding the runners and seat. Use the exact component instructions and specified hardware.

Trial the complete driving position, adjustment and restraint arrangement before final tightening. Have the installer complete the agreed mechanical and electrical checks before the car is used.

Send the details needed for one complete kit quotation

Photographs of the seat base, visible part labels and floor attachments help us specify the assembly. Add the seat you prefer and any parts proposed for reuse.

  • Model year, chassis and original market, with the generation confirmed.
  • Actual steering arrangement and physical seat position.
  • Body style, trim and any previous seat conversion or floor repairs.
  • Full SB037 side reference and the supplied runner pattern.
  • Chosen seat, required adjustment and original seat equipment.
  • Road or track use, driver requirements and the planned belt or harness.

Common questions

It covers the MY2000-2005 second-generation portion of Planted’s named 1994-2005 Dodge Neon application.

DaimlerChrysler described the redesigned 2000 model arriving at dealers in the first quarter of 1999, so registration year alone is insufficient.

The manufacturer’s shared application does not independently approve every floor configuration, seat clearance or upper fitting assembly.

Include the exact SRT-4 and original-seat details for a specific assessment. The general Neon application is not a blanket approval for that derivative’s complete installation.

Have the actual brand, market, floor and supplied kit confirmed separately before treating another version as the same application.

The linked Planted SB037 provides the listed lower bracket route within the maker’s 1994-2005 Dodge Neon application, with the exact car and supplied assembly to be confirmed.

SB037DR is Standard physical left, while COBRA-SB037DR is the Alternate physical-left pattern.

SB037PA is Standard physical right, while COBRA-SB037PA is the Alternate physical-right pattern.

State physical left and LHD beside the full bracket reference, and have the supplied part confirmed against the actual floor.

Give us the actual steering, market and floor details, because the maker’s general FAQ explains that not every international or RHD version has been verified.

Alternate substitutes Cobra / Scheel-Mann for the Standard Recaro slider pattern and needs specifying separately from the side.

Itemise the runners, any supports and hardware separately so the complete supplied assembly is clear.

Try the linked Monaco Pro, Sprint and TRS-E with the exact seat version, driver fit, mounting method and cabin clearance in mind.

The guide links the Sparco R100, Corbeau Sportline RRS pair and Cobra Misano Anniversary for comparison with your car and driver.

Specify a confirmed lower assembly for each physical position when ordering the pair of seats.

Confirm the exact runner and supplied pattern together, because Planted distinguishes Narrow and Wide Cobra slider layouts.

Use suitable supports for a shell with side fixings and check their connection to the runner or lower bracket.

Have a fixed installation specified separately, because removing runners changes the attachment layout.

Measure the complete assembly with the selected seat. No universal reduction is established for every combination.

Have the exact belt attachments, buckle and routing assessed with the chosen seat and the vehicle’s original restraint equipment.

The harness needs suitable vehicle anchors and routing assessed for its exact model and intended use. The seat openings are not those anchors.

Include the generation, model year, chassis, market, steering arrangement, physical side, mounting photographs, preferred seat, original equipment and intended use.

Garreth’s top tip

I would give the driver time in a fixed bucket and a recliner before choosing either. Compare the cushion and support with how the Neon is used. Bring that choice to us and we can work through the complete fitting kit.

Cameron’s fitting view

Write the physical side beside the full SB037 reference. Confirm the runner pattern independently of the shop’s seat-position label. Trial the lower bracket against the actual floor before building the seat assembly.

Plan your Dodge Neon second generation (2000-2005) seat change

Drop us an email or open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.

Back to the Car Seat Selector guide.

Application sources: Planted physical-left bracket, physical-right bracket, installation guidance and FAQs. Generation context: original Dodge 1999 brochure and DaimlerChrysler 1998 annual report, printed page 33. Confirm the actual vehicle and supplied kit.

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text