Dodge Charger Seventh Generation (2011+) Bucket Seat and Fitting Guide
Choose the seat and fitting kit for your seventh-generation Charger
For a seventh-generation Charger from 2011, the current Planted SB112.1 listing has the RHD Driver Side option and the manufacturer names SB112.1PA for physical right.
Garreth would choose between a fixed bucket and a recliner by trying the support, cushion and adjustment with the driver. Include how the car will be used. We can then quote the chosen seat and its fittings together.
Cameron’s starting point is the side of the car being changed. The manufacturer’s shared left family is SB112DR, but the earlier SB112 shop listing currently has only its right-side choice. Ask us to confirm separate left-hand supply before planning a pair.
At a glance
- Scope: Planted’s seventh-generation Charger application from 2011; no later generation is inferred from the plus sign.
- Current lower fitting route: SB112.1, RHD Driver Side option.
- Maker physical right: SB112.1PA Standard or COBRA-SB112.1PA Alternate.
- Maker physical-left family: SB112DR / COBRA-SB112DR, with separate supply confirmation needed.
- Choose the runner pattern independently of the seat-side label.
- Assess original seat-mounted restraints, wiring and powered functions before removal.
Confirm the generation and the equipment on your car
Give us the model year, chassis details, trim, original market, drive configuration and actual steering arrangement. Include photographs of the present seats and mounting arrangement, plus any previous conversion.
This guide follows the seventh-generation application named by Planted from 2011. It does not extend that bracket application to a later-generation Charger. The suffix on the right bracket is a fitting distinction, not a reason to choose parts by a registration date alone.
Start with SB112.1 for the listed right-side route
The linked SB112.1 product currently offers RHD Driver Side. The manufacturer identifies the corresponding Standard physical-right family as SB112.1PA for the seventh-generation Charger. Confirm the supplied full reference against the actual vehicle before choosing the upper components.
Keep the right bracket distinct from the earlier SB112PA application. Have the quotation list the selected seat and complete lower assembly, including any runners, supports and hardware.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Treat the shared left bracket as a separate supply enquiry
Planted names SB112DR for physical left across the sixth and seventh generations. That shared manufacturer application is useful when planning a left seat, but the current earlier SB112 shop listing offers only its right-side selection. It does not establish an orderable later left-hand configuration.
Cameron recommends quoting the left and right positions separately. Confirm the SB112DR left supply alongside SB112.1PA on the right. On an LHD car the driver sits on physical left, so include the actual steering arrangement with the full code.
| Physical side | Maker Standard | Maker Alternate | Shop supply route |
|---|---|---|---|
| Right | SB112.1PA | COBRA-SB112.1PA | SB112.1 listing, RHD Driver Side; confirm supplied pattern |
| Left | SB112DR | COBRA-SB112DR | Separate enquiry; not a selectable left option on the earlier SB112 listing |
Match the supplied bracket pattern to the exact runner
Standard and Alternate refer to manufacturer pattern choices. Standard includes the Recaro slider pattern; Alternate exchanges that pattern for Cobra / Scheel-Mann. The shop’s single position selection does not independently choose an Alternate version. Put the exact bracket and runner references on the quotation. Check the lower runner attachment against the supplied bracket, and the upper attachment against the selected seat or supports.
Try fixed buckets with the driver and the car’s controls
The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E are fixed-back options to compare for support. Establish the exact version and whether its permitted mounting arrangement uses base fixings or side supports before building the kit. Trial shoulder and bolster clearance with the door closed. Check pedal reach, the steering wheel, gear selection and buckle access. A car’s performance badge does not establish that a particular shell clears its console or suits its driver. Garreth would compare the entry space and support with the reclining options before choosing a seat for road use.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £244.40 Incl. VATFrom £203.67 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Compare recliners for a Charger that covers road miles
The Sparco R100, Corbeau Sportline RRS and Cobra Misano Anniversary are reclining alternatives to assess. Try the cushion and backrest with the person who will drive the car, then check the chosen seat’s base fittings. Include room for the recline controls, the required backrest movement and rearward travel in the trial. The linked RRS product supplies a pair of seats; the separate left-side bracket enquiry still needs resolving before treating that as a complete two-seat conversion.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,649.00 Incl. VATFrom £1,374.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Confirm the exact Cobra runner and bracket together
The Cobra Premium runners have different handle-type options. Specify the actual reference and compare both fixing interfaces with the chosen seat and lower bracket. Planted distinguishes Narrow and Wide Cobra slider patterns. Ask which pattern and runner version are being supplied together; neither a brand name nor a handle-width label describes the entire assembly.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Plan adjustment around the finished driving position
The linked Sparco sliding runner kit is another option to check with the selected seat. Have its lower bracket connection and upper seat or support connection confirmed before ordering. During the fitting trial, check access to the handle and operation of both locking runners throughout the travel required.
Measure the final seating position with all agreed parts in place, including any supports or spacers.
Use suitable supports for a side-mounted shell
The linked Sparco steel side mounts are an option for a shell using side fixings, subject to the exact seat and lower assembly. Confirm the fixing geometry and the component instructions for that combination. A fixed installation without runners needs its own attachment plan.
Leaving out an adjustment component does not show that the remaining holes or hardware suit the new arrangement.
Measure height, clearance and travel in the actual cabin
Trial the assembly with the regular driver, checking steering reach, pedal reach and visibility. Include the actual roof trim or sunroof, closed door and centre console, together with a helmet for track use. Assess the required movement of the seat and its controls without fouling the cabin or buckle.
If the car has adjustable pedals or column equipment, include their intended positions. No universal lowering amount follows from choosing SB112.1.
Assess the original seat systems before the change
The original 2011 Dodge user guide describes power adjustment, lumbar and memory-seat equipment, heated seats and seat-mounted side airbags. Identify which equipment is actually fitted to your year and specification before deciding on a replacement. Use a qualified installer and the exact vehicle service information to assess affected wiring, sensors, buckle and restraint components.
Agree the completed system checks before removal. A floor bracket does not preserve the original electrical functions or provide a solution for the restraint equipment.
Include the belt or harness in the fitting assessment
Have the original belt attachments, buckle access and belt path assessed with the selected seat in position. The 2011 user guide describes pretensioning devices for the front belts; retain the exact vehicle equipment in the installer’s assessment.
For a harness, specify its model and the intended use first. Routing and vehicle anchors need assessment with the seat under the relevant instructions and event requirements. Shell openings do not establish suitable anchors in the car.
Trial the actual lower bracket before building upwards
Check the supplied full reference and trial the bare bracket against the actual floor attachments. Include previous adapters, repairs and any difference from the reference vehicle before adding runners and the seat.
Trial the complete driving position, adjustment and restraint arrangement before final tightening under the component instructions. Have the installer complete the agreed mechanical and electrical checks before the Charger is used.
Quote the two physical positions separately
Send the car and seat details with mounting photographs and any components proposed for reuse. If both seats are changing, ask for separate confirmed left and right lower assemblies.
- Model year, chassis details, generation, trim and original market.
- Drive configuration, actual steering arrangement and physical seat position.
- Current mounting arrangement, repairs and previous seat conversions.
- For the right: full SB112.1PA family and supplied runner pattern.
- For the left: confirmed separate SB112DR supply and exact application.
- Chosen seat, adjustment, original seat functions, restraint assessment and road or track use.
Common questions
Confirm the physical-right SB112.1PA family and supplied pattern with your exact car when choosing the current SB112.1 RHD Driver Side option.
Planted names SB112PA for the sixth-generation 2006-2010 application and SB112.1PA for the seventh generation from 2011, with no right-side interchange established here.
The 2011+ bracket label identifies the manufacturer’s seventh-generation application and does not establish compatibility with a later Charger generation.
The manufacturer’s shared sixth/seventh-generation left family is SB112DR Standard or COBRA-SB112DR Alternate, with supply to be confirmed separately.
The current earlier listing exposes only RHD Driver Side. That right-side option is not a confirmed later left-hand kit. Ask for the exact shared-left reference and supply route.
For an LHD driver, specify physical left beside the full bracket reference and ask us to confirm supply for that position.
The current SB112.1 listing has one position, so have separate left supply confirmed before ordering a two-seat conversion.
Give us the actual steering, market and floor configuration, as the manufacturer’s general FAQ explains that not every international or RHD version has been verified.
Alternate substitutes Cobra / Scheel-Mann for the Standard Recaro slider pattern and needs confirming separately from the physical side.
Itemise any runners, supports and hardware with the lower bracket so the supplied assembly and adjustment are clear.
Try the linked Monaco Pro, Sprint and TRS-E with the exact version, mounting method, driver fit and cabin clearance in mind.
The guide links the Sparco R100, Corbeau Sportline RRS pair and Cobra Misano Anniversary for comparison with the actual driver and car.
Each seat needs a confirmed lower assembly, with left-hand supply a separate enquiry on this Charger route.
Confirm the exact Cobra runner with the bracket pattern, because Planted distinguishes Narrow and Wide slider layouts.
Use suitable supports for a shell with side fixings and confirm their connection to the selected runner or lower bracket.
Have a fixed installation specified separately, because removing runners changes the mounting layout and does not establish the final height or fixing alignment.
Measure the completed assembly with the exact seat, supports and runners. There is no universal reduction for every combination.
Their retention needs a separate plan for the exact replacement seat and vehicle. A lower bracket alone does not retain those functions.
No. Have a qualified installer assess all affected original restraint and electrical components using the exact vehicle information and agree the completed checks.
Have its attachments, buckle, routing and associated restraint equipment assessed with the selected seat in position.
The exact harness needs suitable vehicle anchors and routing assessed for its intended use. The seat openings are not those anchors.
Include the car’s year, generation, chassis, trim, market, steering and drive configuration, physical sides, mounting photographs, original equipment, preferred seats and intended use.
Garreth’s top tip
I would choose the seat around the driver and how the Charger is used. Try a supportive recliner against a fixed bucket. Give each enough time to assess the cushion and driving position before ordering.
Cameron’s fitting view
For two seats, confirm the separate left supply first. Keep SB112.1PA on the right distinct from the shared SB112DR left family. Add the runner pattern and original-seat equipment assessment to the quote.
Plan your Dodge Charger (seventh generation, 2011 onwards) seat change
Drop us an email or open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Application sources: Planted seventh-generation right bracket, shared left bracket, installation guidance and FAQs. Original equipment context: Dodge’s 2011 user guide. Confirm the equipment on the exact car and the supplied fitting package.






