Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Datsun / Nissan 280ZX (1978-1983) Bucket Seat and Fitting Guide

Choose seats and fittings for your S130 280ZX

The 280ZX is the S130 generation of the Z car. Nissan’s heritage collection identifies it as the second generation, introduced in 1978 and sold overseas as the Datsun 280ZX. Its examples include a 2by2 and a two-seat T-top, so include the body and roof details when asking about replacement seats.

Our listed vehicle bracket is Planted SB318 for the Datsun / Nissan 280ZX (1978-1983). Start there, then choose the seat and the fittings above it. The earlier 280Z and the later 300ZX need their own application checks.

For a road car, try a recliner alongside a fixed bucket before deciding. For track use, assess the seat with the driver’s normal equipment and proposed restraints. Either way, trial the complete assembly in your actual car before final fitting.

At a glance

  • Vehicle bracket: Planted SB318, named 280ZX application 1978-1983.
  • Physical left: SB318DR; physical right: SB318PA.
  • Shop side labels refer to right-hand-drive cars.
  • Standard and Alternate runner patterns are separate choices from the side.
  • Adjustment needs compatible runners; a side-mounted shell also needs supports.
  • Check the actual body, roof, floor attachments and complete seating position.

Identify the S130 and the car you actually have

Send the chassis details and actual year with the original market and steering position. Identify two-seat or 2by2 bodywork, the roof arrangement and the trim, including turbo where relevant. Those details help distinguish the car from another Z carrying a similar badge.

Planted’s bracket pages give a general 280ZX application rather than separate approvals for every body or market. Have the exact car’s floor attachments compared before ordering. Nissan’s historical model information identifies the vehicle; it does not establish seat-bracket interchange.

Look at the present floor attachments first

Photograph each mounting point and the lower seat assembly before dismantling it. Record any existing adapter references. If the car has repaired floors, altered seat mounts or cage work near the seat, show those changes to the installer.

Planted develops its brackets around a reference vehicle floor. Previous work can change that starting point. Have the mounting surfaces and attachment condition assessed before committing to the new assembly.

Use SB318 as the vehicle-specific starting point

The SB318 bracket connects the named 280ZX floor application to the parts above it. It is one part of the installation. Include the seat, any runners and the required seat-side fittings when requesting a quote.

For a base-mounted seat, check the lower seat attachment and runner arrangement. For a side-mounted shell, specify compatible supports as well. Order the appropriate bracket for each physical position being changed.

Put the physical side beside the full part number

Planted calls SB318DR Driver / Left and SB318PA Passenger / Right. Those manufacturer driver/passenger names follow the LHD reference vehicle. In our shop, the matching variants are labelled RHD Passenger Side and RHD Driver Side respectively.

On a right-hand-drive 280ZX, physical right is the driver’s position. On a left-hand-drive car, it is the passenger’s position. Give us both the steering arrangement and the physical side, and have the actual floor checked rather than relying on the side label alone.

SB318 side references and the independent runner-pattern choice
Physical sideStandardAlternateShop label
LeftSB318DRCOBRA-SB318DRRHD Passenger Side
RightSB318PACOBRA-SB318PARHD Driver Side

Confirm Standard or Alternate before choosing the runners

Planted offers two patterns on its 280ZX bracket pages. Standard includes the Recaro slider pattern. Alternate replaces that pattern with the Cobra / Scheel-Mann pattern, so it is a component choice to settle before ordering.

The shop’s side selector does not select between those manufacturer pattern versions. Have the supplied bracket version written on the quote with the exact runner reference. The upper connection still has to suit the seat or its side supports.

Compare fixed buckets for support and access

The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E give you fixed-back options to try. Their linked listings describe base and side mounting options. Choose the permitted method for the exact seat version and specify the components below it.

Try the driver in the seat before choosing a finish. Then check the shell’s shoulders and lower bolsters against the 280ZX door trim and centre tunnel. Practise getting in and out through the actual opening, with any cage included in the trial.

Try a recliner for a road-focused 280ZX

The Sparco R100, Corbeau Sportline RRS and Cobra Misano Anniversary are base-mounted reclining options to assess. Compare their support with the fixed buckets and try the adjustment controls from the intended driving position.

Check backrest movement and clearance behind the seat. For a 2by2, include the rear access you intend to retain; do not assume a replacement mechanism reproduces the original access. The linked RRS listing supplies two seats, and each position still needs its own lower fittings.

Match the exact Cobra runner to the bracket pattern

The linked Cobra Premium runner listing offers 291mm and 405mm handle-type options. Supply the exact runner reference and have both attachment interfaces checked. The handle choice alone does not identify every fixing dimension.

Planted distinguishes Narrow and Wide Cobra patterns. Narrow is included on both bracket versions; Wide calls for Alternate or a separately specified modification. Confirm the supplied version before buying rather than planning a modification from a generic compatibility label.

Specify adjustment with the complete seat assembly

The linked Sparco runner is another adjustment option to assess. Its upper fixing must match the seat or side supports, and its lower fixing must suit the supplied SB318. Agree both connections with the fitting kit.

Trial the handle where you can reach it and check that both runners lock correctly through the travel you will use. Include every regular driver in the position check. Judge height with the seat and all lower parts assembled.

Add supports when the chosen shell uses side mounting

The linked Sparco steel side supports are an option to check against a shell that permits side mounting. Match the shell’s fixing locations and specify the lower connection to the runner or bracket.

A direct fixed installation needs its own attachment plan. Planted’s instructions distinguish that arrangement from a sliding installation. Have any required bracket work specified by the installer; omitting runners does not prove that the existing holes line up.

Check the driving position with the roof in place

Trial the complete assembly with the driver, checking pedal reach and visibility. Include the helmet normally used on track. On a T-top car, assess the position with the panels fitted and check the surrounding roof trim.

Move the seat through the adjustment range you need and check the handles against the tunnel and door. Include space behind the backrest and the belt buckle beside the cushion. Resolve contact during the trial rather than choosing parts from a promised height drop.

Plan the restraints alongside the seat

Identify where the current belt and buckle attach and show those fittings to the installer. Check their position and operation with the replacement seat. A bracket tab or a matching seat pattern does not establish the finished restraint arrangement.

If you intend to use a harness, specify its exact model and purpose. Have the routing and anchors assessed with the seat and surrounding structure, following the relevant instructions. Harness openings in the shell are not anchors in the car. For competition use, check the complete installation against the event requirements.

Trial the bracket before assembling the upper parts

Planted’s instructions start with checking the bare bracket against the vehicle mounts. The upper components are then assembled and the complete seat is trialled in the car. Follow the instructions and fastener requirements for the actual parts supplied.

At the trial, check adjustment and access with the driver present. Keep the seat position consistent while the final hardware is tightened. The bracket manufacturer’s separate 240SX / 300ZX LOW installation routes are not instructions for substituting those brackets into a 280ZX.

Keep the whole fitting plan on one quote

Send the vehicle and mounting details with the seat you want to try. Include any existing components proposed for reuse. We can then check the bracket choice and work through the upper fittings with you.

  • Actual year and chassis details, body, roof and trim.
  • Original market, present steering position and physical seat position.
  • Photographs of the floor attachments and existing adapters.
  • Exact seat version, bracket reference and confirmed runner pattern.
  • Required adjustment and the intended belt or harness arrangement.

Common questions

Planted SB318 is listed for Datsun / Nissan 280ZX (1978-1983). Match that named application to the actual car and its present mounts, then specify the seat and upper fittings.

Nissan identifies the second-generation Z introduced in 1978 as S130 and describes Datsun 280ZX as its overseas name. Give us the chassis details with the fitting enquiry, especially where badges or registration dates are unclear.

Start from the named 280ZX application. A similar badge or engine size does not confirm an interchangeable floor bracket. Have any proposed earlier-Z components checked independently.

The manufacturer pages give a general 280ZX application. Include your exact body and market and have the floor attachments checked. Nissan’s separate historical examples do not provide bracket approval for every configuration.

Identify the roof arrangement with the enquiry. Trial the driving position with the panels fitted, including the helmet where relevant. Check the seat against the surrounding trim and actual roof opening.

SB318DR is the manufacturer’s Standard physical-left reference. Our corresponding option is labelled RHD Passenger Side. Give us the actual steering arrangement as well as the physical side.

SB318PA is the manufacturer’s Standard physical-right reference. Our corresponding option is labelled RHD Driver Side. On an LHD car that physical position is the passenger’s side.

Have the exact floor checked before ordering. Planted explains that its reference vehicles are generally LHD and that it has not verified every RHD or international version. Side naming and actual floor fit are separate checks.

Planted’s Standard pattern includes the Recaro slider pattern. Check the exact runner at both interfaces and have the supplied version confirmed on the quote.

Alternate replaces the Recaro slider pattern with the Cobra / Scheel-Mann pattern. It does not select the side of the car. Confirm that choice separately from the shop’s side variation.

The shop lists runners as a separate part for adjustment. Have the quote itemise the bracket, chosen runners and any seat-side supports, together with their hardware.

Assess the exact bucket and its permitted mounting method. The bracket application alone does not establish shell clearance. Trial support and access with the driver, then check the complete assembly in the car.

Compare the linked recliners with the driver and specify their base fittings. Check the adjustment controls and backrest travel in the actual cabin. Include rear access requirements on a 2by2.

Yes, specify suitable supports for the shell and the lower connection. A sliding assembly and a direct fixed assembly use different fitting plans. Confirm the component instructions before choosing parts.

Measure the finished position with the exact seat and lower components. Include the roof and normal driving equipment in the trial. There is no verified height-drop figure for every SB318 and seat combination here.

Show the repairs or alterations to the installer before ordering. Have the present attachment positions and condition assessed against the intended bracket. Do not force a mismatch into place.

Have the actual belt and buckle attachments assessed with the replacement seat. Check routing, access and operation in the trial installation and follow the instructions for the combination. A generic tab does not confirm every original buckle fit.

Specify the exact harness and intended use, then have its routing and anchors planned with the seat and vehicle structure. Shell openings do not provide vehicle anchors. Check competition requirements where applicable.

Use the instructions for the actual parts supplied. Planted lists separate 240SX / 300ZX LOW arrangements; those headings do not establish a 280ZX bracket substitution.

Send the chassis and vehicle details, current mounting photographs and physical side. Add your preferred seat and any parts to reuse, together with adjustment, driver and restraint requirements.

Garreth’s top tip

Garreth would try the seat for support and getting in and out before choosing the trim. On a 2by2, include the rear access you actually need. Judge the driving position with the proposed lower fittings in place.

Cameron’s fitting view

Cameron would put the physical side beside SB318DR or SB318PA, then confirm the supplied runner pattern separately. Keep the car’s market and current mounting photographs with those references so the fitting enquiry is about the actual floor.

Plan your Datsun / Nissan 280ZX seat change

Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.

Back to the Car Seat Selector guide.

Sources: Planted’s physical-left and physical-right SB318 applications, installation instructions and fitting FAQ; Nissan’s S130 2by2 and two-seat T-top heritage entries for vehicle identity; and the linked shop listings. Check current component instructions for the exact installation.

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text