Cobra Monaco Houndstooth Bucket Seat With Custom Trim!
Showroom news, July 2024
A pair of bespoke Cobra Monaco 40th Edition seats has just passed through the showroom for a quality check before going out to the customer. They have a dark houndstooth centre and base, black vinyl bolsters and subtle black embroidery, which gives them a classic look.
What makes them unusual is that the customer supplied their own houndstooth material for the centre and base panels. It is a good example of how far a Cobra seat can be taken towards a design of your own.
- A bespoke pair of Cobra Monaco 40th Edition seats, July 2024
- Customer supplied houndstooth for the centre and base panels
- Black vinyl trim with black embroidery
- The Monaco 40th Edition is approved to FIA 8855-1999
- Fully steel plated, base or side mounted, 4 or 6 point harness slots
- Cut for drivers under 6ft with a 32 to 36 inch waist

What is on this page
The customer's pair
The black embroidery on the head of each seat is tone on tone, so it only shows up as the light catches it, and it suits the black vinyl. The houndstooth is dark, so the overall look is subtle, and the eyelets down the centre of the back rest add to the period feel.
Using the customer's own material is not something every maker will do. Cobra hand trim their seats in the UK, and on the 40th Edition they offer the option of supplying your own trim for the centre panels.

The Cobra Monaco 40th Edition
The 40th Edition is based on the Monaco Pro and carries the same FIA 8855-1999 approval. Cobra built it to mark forty years, and the anniversary is in the trim; the shell and steel construction are the Monaco’s. The houndstooth version began as a trim we designed for one of our customers, and it went down so well that we made it a product, with or without eyelets, in Cobra’s standard houndstooth or in material you supply.
- Fixed back bucket for competition or fast road use
- Fully steel plated, with a solid back and base for intrusion protection
- Deep sides, an integral head pad and shoulder support
- Slots for a 4 or 6 point harness
- Base mounted or side mounted
- About 11.4kg, the cost of the steel plating
-
From £484.80 Incl. VATFrom £404.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £474.00 Incl. VATFrom £395.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £774.00 Incl. VATFrom £645.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
The 40th Edition in the showroom
We have a pair of standard Monaco 40th Edition seats on display in the showroom, in black vinyl with white stitching, ready to try and available to dispatch or collect. The eyelets down the back give it much of its retro look, while the materials are modern. It is available with over 20 stitching and logo colour options.
The steel frame is fairly narrow at the base, and Cobra cut it for drivers under 6ft with a 32 to 36 inch waist. Garreth’s advice is to sit in one before ordering if you can, or send us your height and waist and we will tell you whether a narrower or wider Monaco would suit you better.
Other Cobra Monaco seats
The Monaco range covers road seats up to FIA approved competition seats, in several widths, including narrow versions for small cockpits. The Monaco Pro is the one for more serious drivers: FIA approved, fully steel plated with a solid back and base, side or base mounted, and trimmed in spacer fabric that lets air move against your back. Our guide to every Cobra Monaco sets out the differences.
Once the seats are chosen, the harness comes next. We carry road, race and FIA approved harnesses, and we can suggest one that suits the seat and the car.
Can I supply my own trim for a Cobra Monaco?
On the Monaco 40th Edition houndstooth seat, Cobra offer the option of using your own material for the centre panels.
Is the Cobra Monaco 40th Edition FIA approved?
Yes. It is approved to FIA 8855-1999, like the Monaco Pro it is based on.
Can the Monaco 40th Edition be base mounted?
Yes. It can be base mounted or side mounted.
What size driver does the Monaco 40th Edition suit?
Cobra cut it for drivers under 6ft with a 32 to 36 inch waist.
💬
Made your wayA Monaco in your own trim
An FIA approved steel seat with centre panels in the material you choose.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.




