Chrysler Crossfire (2004-2008) Bucket Seat and Fitting Guide
Plan the complete seat assembly for your Crossfire
Chrysler’s 2005 specifications describe the Crossfire Coupe and Roadster as two-seaters with a front engine and rear-wheel drive. For a replacement seat, start with the exact body and the position you want to change.
Planted lists SB237 for the Chrysler Crossfire (2004-2008). Match that application to the actual car and its current mounts, then specify the parts between the floor and the chosen seat.
Garreth would begin by trying the support and access the driver wants. Cameron would keep the physical side and supplied bracket pattern beside the seat reference. Include any previous mounting changes in the enquiry.
At a glance
- Named bracket application: Chrysler Crossfire (2004-2008), Planted SB237.
- Identify the exact Coupe or Roadster and trim with the fitting enquiry.
- Standard physical-left reference SB237DR; physical-right SB237PA.
- Select the supplied runner pattern separately from the shop side choice.
- Check the complete seat against the actual roof and surrounding cabin.
- Specify belt attachments and any affected seat equipment with the assembly.
Identify the body, trim and current floor attachments
Both Planted pages name Chrysler Crossfire (2004-2008). Send the actual year, Coupe or Roadster body and trim with the original market. Include the present steering position and photographs of the lower mounts.
Chrysler issued separate SRT-6 specifications for the Coupe and Roadster. Include SRT-6 in the enquiry where relevant. Have SB237 checked against that exact car and its current fittings before ordering.
Record the existing seat before removing it
Photograph the current runners, seat attachments and any adapters, including their references where visible. Show altered mounts or earlier repairs to the installer. Keep the original components identified during removal.
Record the adjustment and other seat functions actually fitted and which you want to retain. Have affected connections and lower attachments assessed with the replacement assembly. Agree the parts and hardware before dismantling the existing seat.
Try the support and getting in and out
Describe what needs to improve about the current seat and who uses the car. Try the exact bucket or recliner with the driver. Garreth would judge cushion and backrest support in the clothing and equipment normally used.
Try getting over the seat’s bolsters through the actual door opening. Check the movement and controls required for everyday use. Include any storage access you need behind the backrest, along with clearance to the surrounding trim.
Put SB237 and the upper fittings on the same quote
SB237 is the vehicle bracket in the proposed seat assembly. Confirm the physical side and supplied pattern for the exact Crossfire. Keep the selected seat’s mounting method beside those references.
A base-mounted seat needs compatible seat-side fittings; a side-mounted shell needs suitable supports. Include any runners required for adjustment. Ask for each attachment and its hardware to be specified as one assembly.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Match the physical side and runner pattern separately
Planted identifies SB237DR as physical left and SB237PA as physical right. The shop’s matching variations are RHD Passenger Side and RHD Driver Side respectively. Put the full reference beside the actual side being changed.
On an LHD car, physical left is the driver’s position even though the shop calls SB237DR RHD Passenger Side. Include the present steering arrangement with the enquiry. That label alone does not confirm the exact vehicle floor.
Standard includes the Recaro slider pattern; Alternate replaces it with Cobra/Scheel-Mann. Confirm the supplied version independently of the side choice. Check the exact runner at its upper and lower attachments.
| Physical position | Standard reference | Alternate reference | Current shop label |
|---|---|---|---|
| Left | SB237DR | COBRA-SB237DR | RHD Passenger Side, SB237DR |
| Right | SB237PA | COBRA-SB237PA | RHD Driver Side, SB237PA |
Try the fixed buckets with the driver
The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E are fixed-back options to compare for this enquiry. Their listings describe base and side mounting options. Confirm the permitted method for the precise seat version and itemise the fittings below it.
Trial the shell’s widest points against the actual door trim, centre console and space behind the backrest. Include any cage and the driver’s usual equipment. Try entry and exit during the same trial. A matching bracket pattern does not establish clearance for every shell.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £244.40 Incl. VATFrom £203.67 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Compare backrest adjustment and the controls you can reach
The Sparco R100, Corbeau Sportline RRS and Cobra Misano Anniversary are base-mounted reclining options to assess with the lower assembly. Try the exact model’s support with the driver. Garreth would include access to the adjustment controls when judging the position.
Check the backrest through the range you intend to use, including clearance behind it. The linked RRS listing supplies two seats. Each physical position needs its own confirmed bracket and lower components, itemised separately.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,649.00 Incl. VATFrom £1,374.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Confirm the Cobra runner dimensions with the bracket
The Cobra Premium runner listing has 291mm and 405mm handle-type options. Get the exact runner reference and attachment dimensions checked at both interfaces. A handle label alone does not confirm the complete bolt pattern.
Planted distinguishes Narrow and Wide Cobra slider patterns. Narrow is included on both bracket versions; Wide needs Alternate or a separately specified modification. Agree the supplied SB237 version before ordering the upper assembly.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Check the Sparco runner above and below
Use the linked Sparco runner as an adjustment option to assess with the seat. Its upper attachment must suit the seat or side supports. Match the lower attachment to the supplied SB237 pattern as well.
Try the handle and lock operation with the complete assembly in position. Include each regular driver’s required travel. Check the final height with the runner and supports fitted, using the actual driving equipment.
Choose supports for the exact side-mounted shell
The linked Sparco steel supports are an option for a seat that permits side mounting. Check their attachment positions against the shell and specify the lower connection to the runner or vehicle bracket. Use the instructions for the actual components.
For a base-mounted installation, specify its seat-side fittings separately.
Trial the complete position with the actual roof
Trial the complete assembly with the driver and compare visibility with the current seat. Include pedal reach and access to the controls. Use the usual helmet where relevant, with the Coupe roof or Roadster hood in its closed position.
Run the adjustment through the range you will use. Check the shell and handles against the door trim and centre console, then check the backrest against the space behind it. For a Roadster, have the seat and any added structure checked against the hood’s operating envelope. Resolve contact before final tightening.
Identify the existing restraints and seat equipment
Show the installer the actual belt and buckle attachments, along with any affected seat equipment or connections. Include changes made during an earlier conversion. Agree how those components will be dealt with before removing the existing assembly.
Follow the relevant seat, restraint and fitting instructions for the combination being installed.
Specify a harness installation with its anchors
If a harness is proposed, identify the exact model and intended use. Have its routing and attachment points assessed with the selected seat and surrounding structure. Include any cage or other components involved.
Harness openings in a shell do not provide anchor points in the Crossfire. Follow the seat and harness instructions for the complete combination. For competition use, have the finished installation checked against the event’s requirements.
Trial the full assembly and itemise the quote
Planted’s sequence begins with checking the bracket in the vehicle, assembling the upper parts outside it and trialling the complete seat assembly. Resolve alignment and access during the trial. Complete the fitting using the instructions and fastener requirements for the actual components.
Send the full vehicle details and mounting photographs with the preferred seat version. Cameron would keep the physical side and supplied pattern beside SB237 on the quote. Include the driver and restraint requirements with the full parts list.
- Actual year, Coupe or Roadster body, trim, original market and present steering position.
- Physical side and full SB237 reference, with the supplied pattern confirmed.
- Current mounting photographs and references of any adapters proposed for reuse.
- Exact seat version, runner and any side supports required.
- Driver requirements, roof clearance and the proposed restraint arrangement.
Common questions
Planted names Chrysler Crossfire (2004-2008) on both side-specific bracket pages. Give the actual year, body and trim with the original market. Have the current mounts and complete assembly checked for that exact car.
Include the actual year, Coupe or Roadster body and trim, including SRT-6 where relevant. Add the original market and present steering arrangement. Photographs of the existing lower mounts help identify earlier seat or adapter changes.
Have the exact car checked against the bracket application and current mounts. Include the full body and trim details with the fitting enquiry. A shared model name alone does not confirm every existing lower assembly.
Use the named Crossfire SB237 application and have every proposed component checked for the actual car. A platform relationship does not establish interchangeable seat mounts or a complete compatible fitting assembly.
Record the functions actually fitted and which you want to retain. Show the installer the relevant connections before removing the seat. Have the replacement and any affected equipment planned together.
SB237DR is Planted’s Standard physical-left reference, labelled RHD Passenger Side in the shop. For an LHD car that is the driver’s position. Keep the physical side and full reference with the steering details.
SB237PA is the Standard physical-right reference. Its matching shop variation is RHD Driver Side. Reconcile the full reference with the actual position being changed.
Confirm the supplied Standard or Alternate pattern separately from the shop’s side choice. Check the exact runner dimensions and its upper connection to the seat or supports.
Standard includes the Recaro slider pattern; Alternate replaces it with Cobra/Scheel-Mann. Have the supplied version agreed with the exact upper assembly before ordering.
Specify the seat’s permitted mounting method with its seat-side fittings and any runners or supports required. Have the hardware and each connection checked together.
The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E are options to compare. Try the exact seat with the driver. Confirm the permitted mounting method and clearance with the lower assembly.
The Sparco R100, Corbeau Sportline RRS and Cobra Misano Anniversary are base-mounted reclining options to discuss. Trial the exact model’s support, adjustment and controls with the proposed fittings.
Trial the completed assembly with the actual driver and usual helmet where relevant. Check the Coupe roof or Roadster hood in the closed position. For a Roadster, include the hood movement and any added structure in the clearance assessment.
The linked RRS listing supplies two seats. Confirm the bracket and complete lower assembly for each physical position. Ask for both sides to be itemised on the quote.
Include supports when the exact shell uses side mounting and permits those supports. Confirm their attachment positions and lower connection. A base-mounted seat has its own seat-side fitting method.
The 291mm and 405mm choices are handle-type labels in the runner listing. Get the exact runner reference and its attachment dimensions checked at both interfaces.
Planted distinguishes Narrow and Wide patterns. Narrow is included on both bracket versions; Wide needs Alternate or a separately specified modification. Agree the exact runner with the supplied bracket version.
Send photographs and the references of the existing lower components. Have any altered mounts or previous repairs assessed against the proposed assembly. Include every part you would like to retain.
Have their condition, dimensions and both attachment interfaces checked with the replacement seat and bracket. Their previous use in the car does not confirm the new combination.
Trial the full assembly with the driver and compare it with the current seat. The seat, supports, runner and vehicle bracket affect the position. Check visibility and control reach during the trial.
Specify a direct mounting method and its hardware separately, then trial the resulting position against the component instructions. Confirm that each driver can reach the controls and that the seat clears the cabin.
Record the actual belt and buckle attachments plus any affected seat equipment or connections. Agree the plan for those components with the installer. Include changes made during earlier conversions.
A harness needs its own routing and anchor assessment with the exact seat and surrounding structure. Follow the seat and harness instructions for the complete combination. For a Roadster, have any added structure assessed alongside hood operation.
Send the vehicle details, mounting photographs and physical side with your preferred seat version. Include the proposed runner or supports. Add the driver, roof-clearance and restraint requirements so the full assembly can be checked.
Garreth’s top tip
Garreth would compare the exact seat with the driver’s support and access requirements before choosing the finish. Try getting in and out as well as sitting in it. Judge the position with the proposed lower fittings and actual roof included.
Cameron’s fitting view
Cameron would keep the full Crossfire body and trim details, physical side and supplied pattern beside SB237 on the quote. Include existing adapter references and any parts proposed for reuse. Trial the completed assembly with the driver and actual restraints.
Plan your Chrysler Crossfire seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Sources: Planted’s physical-left and physical-right SB237 applications, installation instructions and runner-pattern guidance; Chrysler’s 2005 Crossfire Coupe/Roadster specifications and SRT-6 specifications; and the linked shop listings. Have the exact vehicle and current component instructions checked with the fitting enquiry.







