Chevrolet Cruze J300 Bucket Seat and Fitting Guide
Match the J300 to Planted's SB299 application
Planted lists SB299 for the Chevrolet Cruze [1st Generation / J300 Chassis], 2008-2016. Keep that chassis identification with the exact year and original market of the car. The actual body and current seat mounts need checking with the proposed assembly.
Garreth would compare the support and adjustment with the driver. Cameron would record the physical side and existing lower fittings beside SB299. Include earlier seat or mounting changes and the access you want to retain.
At a glance
- Listed application: Chevrolet Cruze [1st Generation / J300 Chassis], 2008-2016.
- Standard physical-left reference SB299DR; physical-right SB299PA.
- Confirm the exact year, original market and actual body with the J300 identification.
- Agree Standard or Alternate runner pattern separately from the physical side.
- Trial the completed seat for control reach and access around it.
- Identify the current restraints and affected seat equipment.
Identify the J300 with its year, market and body
Both Planted applications name the first-generation Cruze on the J300 chassis and list 2008-2016. Send the actual year and original market with the car’s model identification. Include the body and current steering arrangement.
Have the actual mounting points compared with the SB299 application before ordering. A different Cruze generation or a differently badged car needs its own check. A shared platform name alone does not establish compatible seat mounts.
Show the existing seat and its lower assembly
Send photographs beneath the current seat, including runner and adapter references where they can be identified.
List any lower components proposed for reuse and have their condition checked. Show earlier mounting changes or repairs to the installer. Identify the seat equipment and affected connections before removing the assembly. Agree how the proposed bracket will attach to the actual car.
Compare support with the access you need
Describe what you want to change about the current seat and who regularly drives the car. Try the exact fixed bucket or recliner with the driver. Garreth would compare the cushion and backrest support using the clothing and equipment normally worn.
Show the movement and space you need around the seat. Include access behind the front seat where it matters for the actual body. Try that access with the proposed fittings; a reclining backrest alone does not establish that it works.
Specify SB299 with the complete upper assembly
The linked SB299 bracket is the vehicle connection to discuss for the listed J300 application. Confirm its physical side and supplied pattern with the exact car. Keep the chosen seat version and permitted mounting method on the same quote.
A base-mounted seat needs compatible seat-side fittings. A side-mounted shell needs suitable supports. Add runners if adjustment is wanted and specify the hardware for every connection.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Match the physical side and runner pattern separately
Planted names SB299DR as the Standard physical-left reference and SB299PA as physical right. The matching shop variations use RHD Passenger Side and RHD Driver Side respectively. Keep the full reference with the actual position being changed.
On an LHD car, physical left is the driver’s position even though the shop labels that variation RHD Passenger Side. Confirm the car’s steering arrangement and actual floor application with the reference. A shop side label alone does not approve every market’s vehicle.
Standard includes the Recaro slider pattern; Alternate replaces it with Cobra/Scheel-Mann. Agree the supplied version separately from the shop’s side choice. Check the runner at its lower and upper attachments.
| Physical position | Standard reference | Alternate reference | Current shop label |
|---|---|---|---|
| Left | SB299DR | COBRA-SB299DR | RHD Passenger Side, SB299DR |
| Right | SB299PA | COBRA-SB299PA | RHD Driver Side, SB299PA |
Try the fixed buckets with the driver
The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E are fixed-back options to discuss with the lower assembly. Their listings describe base and side mounting options. Confirm the permitted method for the precise seat version and itemise the parts below it.
Try the shell with the actual driver seated and when getting into the cabin. Check its widest points against the surrounding trim and any cage. Demonstrate access to any space used behind the front seat. A matching bracket pattern alone does not confirm clearance for every shell.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £244.40 Incl. VATFrom £203.67 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Compare backrest adjustment and the controls you can reach
The Sparco R100, Corbeau Sportline RRS and Cobra Misano Anniversary are base-mounted reclining options to compare with the proposed fittings. Garreth would assess the exact model’s support with the driver. Try the controls while seated.
Trial the backrest and runner movement through the range you intend to use in the cabin. The linked RRS listing supplies two seats. Each physical side still needs its own confirmed bracket and lower components on the quote.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,649.00 Incl. VATFrom £1,374.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Confirm the Cobra runner dimensions with the bracket
The Cobra Premium runner listing has 291mm and 405mm handle-type options. Get the exact runner reference and attachment dimensions checked at both interfaces. A handle label alone does not confirm the complete bolt pattern.
Planted distinguishes Narrow and Wide Cobra slider patterns. Narrow is included on both bracket versions; Wide needs Alternate or a separately specified modification. Agree the supplied SB299 version before ordering the upper assembly.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Check the Sparco runner above and below
Use the linked Sparco runner as an adjustment option to assess with the seat. Its upper attachment must suit the seat or side supports. Match the lower attachment to the supplied SB299 pattern as well.
Try the handle and lock operation with the complete assembly in position. Include each regular driver’s required travel. Check the final height with the runner and supports fitted, using the actual driving equipment.
Choose supports for the exact side-mounted shell
The linked Sparco steel supports are an option for a seat that permits side mounting. Check their attachment positions against the shell and specify the lower connection to the runner or vehicle bracket. Use the instructions for the actual components.
For a base-mounted installation, specify its seat-side fittings separately.
Trial the completed position and access in the car
Trial the complete seat assembly with the driver and compare visibility with the current installation. Check pedal reach and access to the controls. Include the usual clothing and driving equipment.
Move the seat through the adjustment you intend to use. Check the shell, handles and backrest against surrounding trim and any cage. Try getting into and out of the car, including the space used behind the front seat where required. Resolve contact and restricted controls during the trial.
Identify the existing restraints and seat equipment
Show the installer the actual belt and buckle attachments, along with any affected seat equipment or connections. Include changes made during an earlier conversion. Agree how those components will be dealt with before removing the existing assembly.
Follow the relevant seat, restraint and fitting instructions for the combination being installed.
Specify a harness installation with its anchors
If a harness is proposed, identify the exact model and intended use. Have its routing and attachment points assessed with the selected seat and surrounding structure. Include any cage or other components involved.
Harness openings in a shell do not provide anchor points in the Cruze. Follow the seat and harness instructions for the complete combination. For competition use, have the finished installation checked against the event’s requirements.
Trial the assembly and itemise the quote
Planted’s sequence starts with checking the bracket in the vehicle, assembling the upper components outside it and trialling the complete seat assembly. Resolve alignment and access before final fitting. Complete the job using the instructions and fastener requirements for the actual components.
Send the full model and market details with the current mounting photographs and exact seat version. Cameron would keep the physical side and supplied pattern beside SB299 on the quote. Include the driver, cabin-access and restraint requirements with the full parts list.
- Exact generation and year, original market, cabin layout and current steering position.
- Physical side and full SB299 reference, with the supplied pattern confirmed.
- Current mounting photographs and references of any adapters proposed for reuse.
- Exact seat version, runner and any side supports required.
- Driver requirements, access behind the seat and the restraint arrangement.
Common questions
Planted lists Chevrolet Cruze [1st Generation / J300 Chassis], 2008-2016. Give the actual year, original market and body with the chassis identification. Have those details checked against the current seat mounts.
Send the J300 model identification and exact year with the original market and actual body. Include the steering arrangement and mounting photographs. Earlier seat or lower-fitting changes need assessing with the proposed assembly.
A shared platform or badge relationship alone does not establish compatible seat mounts. Have the exact vehicle and mounting points checked against the chosen fitting parts. Keep the current car’s identity on the enquiry.
SB299DR is the Standard physical-left reference, labelled RHD Passenger Side in the shop. On an LHD car that is the driver’s position. Keep the reference and physical side with the steering details.
SB299PA is Planted’s Standard physical-right reference. Its matching shop variation is RHD Driver Side. Reconcile the full reference with the actual position being changed.
Confirm the supplied Standard or Alternate pattern separately from the shop’s side choice. Check the exact runner dimensions and its upper connection to the seat or supports.
Standard includes the Recaro slider pattern; Alternate replaces it with Cobra/Scheel-Mann. Have the supplied version agreed with the exact upper assembly before ordering.
The selected seat needs compatible seat-side fittings and any required runners or side supports. Have every attachment and the hardware specified with the exact mounting method.
The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E are options to compare. Try the exact seat with the driver. Confirm the permitted mounting method and clearance with the lower assembly.
The Sparco R100, Corbeau Sportline RRS and Cobra Misano Anniversary are base-mounted reclining options to discuss. Trial the exact model’s support, adjustment and controls with the proposed fittings.
Demonstrate the movement required with the exact seat and fittings in the car. A reclining backrest alone does not establish access behind the front seat. Check the controls and surrounding clearance as part of that trial.
The linked RRS listing supplies two seats. Confirm the bracket and complete lower assembly for each physical position. Ask for both sides to be itemised on the quote.
Include supports when the exact shell uses side mounting and permits those supports. Confirm their attachment positions and lower connection. A base-mounted seat has its own seat-side fitting method.
The 291mm and 405mm choices are handle-type labels in the runner listing. Get the exact runner reference and its attachment dimensions checked at both interfaces.
Planted distinguishes Narrow and Wide patterns. Narrow is included on both bracket versions; Wide needs Alternate or a separately specified modification. Agree the exact runner with the supplied bracket version.
Send photographs and the references of the existing lower components. Have any altered mounts or previous repairs assessed against the proposed assembly. Include every part you would like to retain.
Have their condition, dimensions and both attachment interfaces checked with the replacement seat and bracket. Their previous use in the car does not confirm the new combination.
Try the complete assembly with the actual driver and usual equipment. Check the shell, handles and backrest through the adjustment you will use. Include getting into the cabin and any access needed behind the front seat.
Specify a direct mounting method and its hardware separately, then trial the resulting position against the component instructions. Confirm that each driver can reach the controls and that the seat clears the cabin.
Record the actual belt and buckle attachments plus any affected seat equipment or connections. Agree the plan for those components with the installer. Include changes made during earlier conversions.
The harness needs its own routing and anchor assessment with the chosen seat and surrounding structure. Follow the seat and harness instructions for the full combination. Competition use also needs the completed installation checked against the event’s requirements.
Send the vehicle details, mounting photographs and the physical side with your preferred seat version. Include the proposed runner or supports. Add the driver, access and restraint requirements so the complete assembly can be checked.
Garreth’s top tip
Garreth would compare the support and adjustment with the actual driver. Try getting into and out of the car as well as sitting in the driving position. Judge the change with the proposed lower assembly included.
Cameron’s fitting view
Cameron would keep the J300 identification, original market and body details beside the physical side and full SB299 reference. Confirm the supplied runner pattern independently. Trial the seat and all its lower fittings in the actual car.
Plan your Chevrolet Cruze J300 seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Sources: Planted’s physical-left and physical-right SB299 applications, installation instructions, runner guidance and linked shop listings. Confirm the exact car and current component instructions with the fitting enquiry.

![Planted Technology Chevrolet Cruze [1st Generation / J300 Chassis] (2008-2016) Seat Bracket](https://www.sportseats4u.co.uk/wp-content/uploads/sites/2/2026/08/SB299DR-1-300x300.jpg)





