Chevrolet Cavalier (1995-2005) Bucket Seat and Fitting Guide
Specify the Chevrolet Cavalier seat package around SB200
Planted lists SB200 for the Chevrolet Cavalier from 1995 to 2005. Give the full make and model with the actual year and body configuration. The chosen seat, vehicle bracket and upper fittings need specifying as one installation.
Garreth would compare the proposed seat with the driver before choosing the finish. Cameron would record the physical side and supplied runner pattern beside that seat on the quote. Include the current mounts and the access you need in the car.
At a glance
- Reviewed application: Chevrolet Cavalier 1995-2005, Planted SB200.
- Standard physical-left reference SB200DR; physical-right SB200PA.
- Include the full make, original market, body and present steering position.
- Confirm Standard or Alternate runner pattern separately from side.
- Compare support and the movement needed for entry and rear access.
- Check the actual seat equipment, lower fittings and restraints.
Identify the Chevrolet and exact year
Keep Chevrolet Cavalier and the actual year on the enquiry. The two reviewed manufacturer pages list 1995-2005. Give the original market and body configuration alongside that application.
A shared model name does not settle a fitting choice. Vauxhall Cavalier applications need their own bracket check. For this Chevrolet enquiry, have SB200 and the actual vehicle mounting points confirmed together.
Compare the new seat with the way you use the car
Describe what needs to improve about the current seat, including the support or adjustment you want. Try the exact fixed bucket or recliner with the driver. Include the clothing and equipment normally used in the car.
Record the existing seat and lower-fitting references. Photograph adapters or runners proposed for reuse. Their condition and both attachment interfaces need checking against the replacement assembly.
Include body configuration and existing changes
Tell us how you enter the car and whether access behind the front seat is needed. Trial the movement required with the exact replacement model. A reclining adjustment alone does not establish suitable rear access.
Show repairs or earlier conversions around the mounting area. Include the present vehicle connections, adapters and any cage. Have the installer assess the proposed bracket connection against what is actually there.
Specify the SB200 bracket and upper components
The linked SB200 product is the vehicle connection for the proposed installation. Confirm the physical side and supplied pattern with the precise Chevrolet application. Cameron would put the upper mounting method beside those references on the quote.
The selected seat still needs compatible base fittings or side supports. Include any runners and the required hardware on the parts list. Trial the bracket in the car before assembling the upper components outside it.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Match physical side before choosing the pattern
Planted identifies SB200DR as physical left and SB200PA as physical right. The shop’s matching variations are RHD Passenger Side and RHD Driver Side respectively. Reconcile the full reference with the actual steering position.
For an LHD car, physical left is the driver’s position even though the shop labels SB200DR RHD Passenger Side. Keep the part reference and physical side together on the enquiry. Confirm the exact vehicle application separately.
Standard includes the Recaro slider pattern; Alternate exchanges it for Cobra/Scheel-Mann. Confirm the supplied version independently of the shop’s side choice. Check the exact runner at its lower and upper connections.
| Physical position | Standard reference | Alternate reference | Current shop label |
|---|---|---|---|
| Left | SB200DR | COBRA-SB200DR | RHD Passenger Side, SB200DR |
| Right | SB200PA | COBRA-SB200PA | RHD Driver Side, SB200PA |
Compare fixed buckets with the driver
The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E are fixed-back options for the enquiry. Garreth would compare their support with the actual driver. Try the exact seat version in the clothing and equipment used in the car.
Their listings describe base and side mounting options. Confirm the permitted method for the precise seat version, then specify the connections below it. A side-mounted arrangement also needs compatible supports.
Check the shell against the door trim and console or cage. Include entry and access behind the seat if that space is used. A compatible runner pattern alone does not establish that every seat clears this Cavalier.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £244.40 Incl. VATFrom £203.67 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Try the recliner with the movement you need
The Sparco R100, Corbeau Sportline RRS and Cobra Misano Anniversary are base-mounted reclining options to compare. Trial the exact model’s support and controls. Include the proposed lower fittings when assessing the final position.
Demonstrate the backrest movement and runner travel needed in the car. Confirm which access functions the chosen seat actually provides. Check its controls and clearance through the range you intend to use.
The linked RRS listing supplies a pair of seats. Each position still needs its own confirmed bracket and lower components. Ask for the fittings on both physical sides to be itemised.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,649.00 Incl. VATFrom £1,374.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Confirm the exact Cobra runner pattern
The Cobra Premium runner has 291mm and 405mm handle-type options in the shop. Identify the precise runner and check the attachment dimensions at both interfaces. The handle label alone does not establish the complete mounting pattern.
Planted distinguishes Narrow and Wide Cobra runner patterns. Narrow is included on both bracket versions; Wide calls for Alternate or a separately specified modification. Agree the supplied bracket version with the runner before ordering.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Check the Sparco runner with the selected fittings
The linked Sparco runner is an adjustment component to discuss with the chosen seat. Its upper connection must suit the seat or side supports. Check the lower connection against the exact supplied SB200 pattern as well.
Try the usable travel and handle access in the completed assembly. Each regular driver needs a suitable position and working lock operation. Include the runner with the seat and supports when checking the finished height.
Match the supports to a side-mounted shell
The linked Sparco steel supports are an option where the seat uses side mounting. Confirm their permitted use and attachment positions against the exact shell. Then specify how they connect to the runners or vehicle bracket.
A base-mounted arrangement uses its own seat-side fittings. Keep that method explicit on the quote so the installer can check each joint. Use the hardware and instructions for the actual components selected.
Trial reach, visibility and cabin clearance together
Check pedal reach and access to the controls with the actual driver seated. Include the usual helmet or other equipment where relevant. Compare the finished trial position with the current seat.
Try entry and exit. Check the shell, handles and recliner controls against surrounding trim and any cage. Include the access required behind the seat. Run the adjustment through the range that will be used.
A direct mounting arrangement needs its own hardware and attachment method. Trial the resulting position against the component instructions before agreeing to omit runners.
Identify the current restraints and affected connections
Show the installer the actual belts, buckles and attachment points. Include any wiring or other seat equipment that needs identifying. Changes made during an earlier conversion belong on that assessment too.
Agree the attachment and connection plan before removing the existing seat. Use the relevant instructions for the components in the car and the proposed replacement assembly. The year and bracket listing alone do not approve every current restraint or electrical arrangement.
Plan a harness with the seat and intended use
Identify the exact harness if one is proposed. Have its routing and anchors assessed with the seat and surrounding structure. Include any cage or other components involved in that installation.
Harness openings in a shell do not establish anchor points in the Cavalier. Follow the seat and restraint instructions for the complete combination. Competition use also needs the finished installation checked against the event’s requirements.
Trial the full assembly before final fitting
Planted’s sequence begins with checking the bracket in the vehicle, assembling the upper components outside it and trialling the complete seat assembly. Resolve alignment and access during that trial. Use the actual component and fastener instructions when completing the job.
Send the vehicle details and current mounting photographs with the preferred seat version. Describe the intended use and restraint arrangement. Cameron would keep the physical side, supplied pattern and upper mounting method beside the complete parts list.
- Full make, exact year, body configuration and original market.
- Present steering position, physical side and full SB200 reference.
- Photographs of vehicle mounts, current adapters and any earlier repairs or conversions.
- Preferred seat version, supplied runner pattern and any side supports.
- Driver requirements, rear access and the actual or proposed restraints.
Common questions
The current Planted application lists Chevrolet Cavalier 1995-2005. Give the actual year, market and body configuration with the enquiry. A car outside that application needs its own fitting check.
Include Chevrolet Cavalier with the actual year, original market and body. Vauxhall Cavalier applications need a separate fitting check. The model name alone does not identify the correct bracket.
SB200DR is Planted’s Standard physical-left reference, labelled RHD Passenger Side in the shop. On an LHD car, physical left is the driver’s position. Keep the reference and physical side together with the steering details.
SB200PA is the Standard physical-right reference. The matching shop variation is RHD Driver Side. Reconcile the full reference with the actual position being changed.
The shop’s side choice is separate from Planted’s runner-pattern options. Confirm the intended supplied version with the exact runner and seat assembly.
Standard includes the Recaro slider pattern, while Alternate replaces it with Cobra/Scheel-Mann. Check the runner’s actual attachment dimensions and its upper connection to the seat or supports.
It is the vehicle connection for the proposed assembly. The selected seat still needs compatible seat-side fittings and any runners or supports required. Have every connection and the hardware itemised on the quote.
The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E are options for the enquiry. Try the exact version with the driver. Check its permitted mounting method and clearance with the complete lower assembly.
The Sparco R100, Corbeau Sportline RRS and Cobra Misano Anniversary are base-mounted options to discuss. Trial the exact model’s support, controls and movement with the proposed fittings.
Demonstrate the movement needed when trying the exact seat. Confirm its functions and clearance in the car. A reclining adjustment alone does not establish suitable access behind it.
The linked listing supplies two seats. Each physical position still needs its own confirmed bracket and lower components. Ask for the complete fittings on both sides to be itemised.
A side-mounted arrangement needs supports permitted for the exact shell. Check their attachment positions and lower connection. A base-mounted arrangement uses its own seat-side fittings.
The runner listing offers 291mm and 405mm handle-type options. Confirm the attachment dimensions at both interfaces because the label alone does not check the complete pattern.
Planted distinguishes Narrow and Wide Cobra patterns. Narrow is included on both bracket versions; Wide calls for Alternate or a separately specified modification. Agree the exact runner and supplied version before ordering.
Send the seat and adapter references with photographs beneath the current assembly. Have the vehicle mounts and any alterations assessed by the installer. Include every part proposed for reuse on the enquiry.
Provide the references, dimensions and photographs so their condition and both interfaces can be checked. Previous use in the car does not establish compatibility with the replacement assembly.
Trial the complete assembly with the driver. The shell, supports, runners and vehicle bracket affect the final position. Compare visibility and control reach with the current seat.
Try entry, exit and any access required behind the front seat. Check the shell, handles and controls against surrounding trim and any cage. Include the adjustment range and usual driver equipment.
Have the direct mounting method and hardware specified separately, then trial the resulting position against the component instructions. Omitting adjustment does not establish suitable height or reach.
Identify the actual belts, buckles and affected seat equipment or connections. Agree the plan with the installer and the relevant component instructions. The bracket listing alone does not approve every present arrangement.
The harness needs its own routing and anchor assessment with the chosen seat. Follow the seat and restraint instructions for the full combination. Competition use also needs the finished installation checked against the event’s requirements.
Send the full make, year, market, body and steering position with mounting photographs. Include the physical side and preferred seat, runners and supports. Add driver, rear-access and restraint requirements so the complete assembly can be checked.
Garreth’s top tip
Garreth would compare support with the actual driver before choosing the finish. Try the access needed in everyday use as well as the driving position. Keep the exact seat version with the lower fittings when judging the change.
Cameron’s fitting view
Cameron would keep the full Chevrolet application, physical side and supplied pattern beside SB200 on the quote. Include existing adapters and any mounting changes. Trial the complete assembly with the driver and actual restraints.
Plan your Chevrolet Cavalier (1995-2005) seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Sources: Planted’s physical-left and physical-right SB200 applications, installation instructions, pattern guidance and linked shop listings. Confirm the exact vehicle and current component instructions with the fitting enquiry.







