Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Chevrolet Camaro (6th Generation) Bucket Seat and Fitting Guide

Build the sixth-generation Camaro seat package around SB284

The sixth-generation Camaro has its own Planted bracket reference, SB284. The current maker application reads 2016 onwards, with separate physical-left and physical-right parts. Give the actual year and version of your car when specifying the complete seat installation.

Choose the seat around the driver and the change you want to make. Garreth would compare support and access with the current seat before choosing the finish. Cameron would keep the exact SB284 side and supplied runner pattern beside the upper fittings on the quote.

At a glance

  • Reviewed application: sixth-generation Camaro, listed by Planted as 2016 onwards.
  • Standard physical-left reference SB284DR; physical-right SB284PA.
  • Choose the supplied Standard or Alternate runner pattern separately from side.
  • Identify the current seat, lower fittings and affected equipment before removal.
  • Compare fixed buckets and recliners with the actual driver and cabin.
  • Trial the full assembly for visibility and control reach as well as clearance.

Confirm the generation and exact car

Keep the model year and full version with the enquiry. The reviewed SB284 pages name the sixth-generation Camaro from 2016 onwards. That application label should stay with the bracket reference when the supplied part is checked.

The earlier Camaro bracket references SB137 and SB137.1 belong to the 2010-2015 fitting review. Use SB284 as the starting point for this generation. Confirm the precise application for your car and any previous changes to its mounting points.

Start with the seat already in the car

Send the present seat reference and photographs of its lower fittings, including any manufacturer or adapter labels. If it is a Recaro, identify the actual seat and complete lower assembly.

Explain what needs to improve. Support, adjustment or access may lead to different seat choices. Compare the proposed model with the current position before deciding which parts will be changed.

Record the mounts and affected equipment

Photograph the vehicle mounting points and anything already fitted between them and the seat. Have repairs and added adapters assessed by the installer. Include any floor, console or cage changes that affect the available space.

Identify the current seat’s controls and connections before removal. Keep any proposed reuse of original components on the parts list so their condition and interfaces can be checked. The model year alone does not identify every seat package now fitted.

Specify the SB284 bracket with the upper assembly

The linked SB284 shop product provides the vehicle connection for the proposed installation. Select the intended physical side, then confirm the supplied runner pattern. The exact seat still needs compatible seat-side fittings and any adjustment components.

Planted offers Standard and Alternate versions on both reviewed side pages. Keep the chosen pattern with the full bracket reference. Itemise the seat, runners, supports where required and the hardware needed at each connection.

Match physical side before choosing the pattern

Planted identifies SB284DR as physical left and SB284PA as physical right. The shop’s matching variations are labelled RHD Passenger Side and RHD Driver Side respectively. Reconcile the full reference with the car’s present steering position.

Standard includes the Recaro slider pattern; Alternate exchanges it for Cobra/Scheel-Mann. The shop’s side selection is a separate choice. Confirm which pattern will be supplied with the exact runner and seat assembly.

SB284 physical-side references and the separate runner-pattern choice
Physical positionStandard referenceAlternate referenceCurrent shop label
LeftSB284DRCOBRA-SB284DRRHD Passenger Side, SB284DR
RightSB284PACOBRA-SB284PARHD Driver Side, SB284PA

Compare fixed buckets with the driver

The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E are fixed-back options for the enquiry. Garreth would compare their support with the actual driver. Try the exact seat version in the clothing and equipment used in the car.

Their listings describe base and side mounting options. Confirm the permitted method for the precise seat version, then specify the connections below it. A side-mounted arrangement also needs compatible supports.

Check the shell against the door trim and console or cage. Include entry and access behind the seat if that space is used. A compatible runner pattern alone does not establish that every seat clears this Camaro.

Try recliner controls and the movement required

The Sparco R100, Corbeau Sportline RRS and Cobra Misano Anniversary are base-mounted reclining options to compare. Trial the exact model’s support and controls. Include the proposed lower assembly when assessing the finished position.

If access behind the front seat matters, demonstrate the movement needed. Confirm which functions the chosen model provides and how much room they need in the Camaro. A reclining adjustment alone does not establish suitable access.

The linked RRS listing supplies a pair of seats. Each position still needs its own confirmed bracket and any other lower components. Ask for the fittings on both physical sides to be itemised.

Confirm the exact Cobra runner pattern

The Cobra Premium runner has 291mm and 405mm handle-type options in the shop. Identify the precise runner and check the attachment dimensions at both interfaces. The handle label alone does not establish the complete mounting pattern.

Planted distinguishes Narrow and Wide Cobra runner patterns. Narrow is included on both bracket versions; Wide calls for Alternate or a separately specified modification. Agree the supplied bracket version with the runner before ordering.

Check the Sparco runner with the selected fittings

The linked Sparco runner is an adjustment component to discuss with the chosen seat. Its upper connection must suit the seat or side supports. Check the lower connection against the exact supplied SB284 pattern as well.

Try the usable travel and handle access in the completed assembly. Each regular driver needs a suitable position and working lock operation. Include the runner with the seat and supports when checking the finished height.

Match the supports to a side-mounted shell

The linked Sparco steel supports are an option where the seat uses side mounting. Confirm their permitted use and attachment positions against the exact shell. Then specify how they connect to the runners or vehicle bracket.

A base-mounted arrangement uses its own seat-side fittings. Keep that method explicit on the quote so the installer can check each joint. Use the hardware and instructions for the actual components selected.

Trial reach, visibility and cabin clearance together

Trial the complete assembly with the actual driver seated. Compare the view and access to the controls with the current position, including any helmet or equipment normally used. The shell and every lower component affect the finished height.

Check the shell, handles and any recliner controls against the door, console and cage. Try entry and exit. Include access behind the front seat where needed. Run the adjustment through the range that will be used.

A direct mounting arrangement needs its own specified hardware and attachment method. Trial the resulting position against the component instructions before agreeing to omit runners.

Identify the current restraints and affected connections

Show the installer the actual belts, buckles and attachment points. Include any wiring or other seat equipment that needs identifying. Changes made during an earlier conversion belong on that assessment too.

Agree the attachment and connection plan before removing the existing seat. Use the relevant instructions for the components in the car and the proposed replacement assembly. The year and bracket listing alone do not approve every current restraint or electrical arrangement.

Plan a harness with the seat and intended use

Identify the exact harness if one is proposed. Have its routing and anchors assessed with the seat and surrounding structure. Include any cage or other components involved in that installation.

Harness openings in a shell do not establish anchor points in the Camaro. Follow the seat and restraint instructions for the complete combination. Competition use also needs the finished installation checked against the event’s requirements.

Trial the full assembly before final fitting

Planted’s sequence begins with checking the bracket in the vehicle, assembling the upper components outside it and trialling the complete seat assembly. Resolve alignment and access during that trial. Use the actual component and fastener instructions when completing the job.

Send the vehicle details and current mounting photographs with the preferred seat version. Describe the intended use and restraint arrangement. Cameron would keep the physical side, supplied pattern and upper mounting method beside the complete parts list.

  • Exact year, Camaro version, original market and present steering position.
  • Physical side and full SB284 reference, with mounting photographs.
  • Current seat and lower fittings, affected equipment and any interior changes.
  • Preferred replacement seat, supplied runner pattern and any side supports.
  • Driver position, access and the actual or proposed restraints.

Common questions

The current Planted application names the sixth-generation Camaro from 2016 onwards. Give the actual year and version with the enquiry. The bracket label is an application reference for checking the supplied part.

The 2010-2015 fitting review uses separate SB137 and SB137.1 references. Start with SB284 for the sixth-generation application and confirm the exact part for the car.

SB284DR is Planted’s Standard physical-left reference. The matching shop variation is RHD Passenger Side. Reconcile the full reference with the actual steering position of the car.

SB284PA is the Standard physical-right reference. The matching shop variation is RHD Driver Side. Keep the complete reference beside the actual position being changed.

The shop’s side choice is separate from Planted’s runner-pattern options. Confirm the intended supplied version with the exact runner and seat assembly.

Standard includes the Recaro slider pattern, while Alternate replaces it with Cobra/Scheel-Mann. Check the runner’s actual attachment dimensions and its upper connection to the seat or supports.

It is the vehicle connection for the proposed assembly. The selected seat still needs compatible seat-side fittings and any runners or supports required. Have every connection and the hardware itemised on the quote.

The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E are options for the enquiry. Try the exact version with the driver. Check its permitted mounting method and clearance with the complete lower assembly.

The Sparco R100, Corbeau Sportline RRS and Cobra Misano Anniversary are base-mounted options to discuss. Trial the exact model’s support, controls and movement with the proposed fittings.

Demonstrate the access required when trying the seat. Confirm the chosen model’s functions and movement in the Camaro. A reclining adjustment alone does not establish suitable access.

The linked listing supplies two seats. Each physical position still needs its own confirmed bracket and lower components. Ask for the complete fittings on both sides to be itemised.

A side-mounted arrangement needs supports permitted for the exact shell. Check their attachment positions and lower connection. A base-mounted arrangement uses its own seat-side fittings.

The runner listing offers 291mm and 405mm handle-type options. Confirm the attachment dimensions at both interfaces because the label alone does not check the complete pattern.

Planted distinguishes Narrow and Wide Cobra patterns. Narrow is included on both bracket versions; Wide calls for Alternate or a separately specified modification. Agree the exact runner and supplied version before ordering.

Send its exact reference and photographs of the lower assembly. Have any proposed reuse or replacement checked against those actual components. The brand name alone does not identify every mounting arrangement.

Provide the references, dimensions and photographs so their condition and both interfaces can be checked. Previous use in the car does not establish compatibility with the replacement assembly.

Trial the complete assembly with the driver. The shell, supports, runners and vehicle bracket affect the final position. Compare visibility and control reach with the current seat.

Try entry, exit and any access required behind the front seat. Check the shell, handles and controls against surrounding trim and any cage. Include the adjustment range and usual driver equipment.

Have the direct mounting method and hardware specified separately, then trial the resulting position against the component instructions. Omitting adjustment does not establish suitable height or reach.

Identify the actual belts, buckles and affected seat equipment or connections. Agree the plan with the installer and the relevant component instructions. The bracket listing alone does not approve every present arrangement.

The harness needs its own routing and anchor assessment with the chosen seat. Follow the seat and restraint instructions for the full combination. Competition use also needs the finished installation checked against the event’s requirements.

Send the year, exact version, steering position and physical side with mounting photographs. Include the current seat equipment and preferred replacement seat, runners and supports. Add driver, access and restraint requirements so the complete assembly can be checked.

Garreth’s top tip

Garreth would compare the new seat with what the driver has now. Try support and access in the exact version being considered. Include the car’s usual use when choosing the finish.

Cameron’s fitting view

Cameron would keep the physical side and supplied pattern beside SB284 on the quote. Check every connection from the vehicle mounts to the seat. Trial the completed assembly with the actual driver and restraints.

Plan your Chevrolet Camaro (sixth generation) seat change

Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.

Back to the Car Seat Selector guide.

Sources: Planted’s physical-left and physical-right SB284 applications, installation instructions, pattern guidance and linked shop listings. Confirm the exact vehicle and current component instructions with the fitting enquiry.

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text