Chevrolet Camaro (1993-2002) Bucket Seat and Fitting Guide
Build the Camaro seat package around the correct SB059 bracket
Planted’s SB059 listing names the Chevrolet Camaro and Pontiac Trans Am from 1993 to 2002. For your Camaro enquiry, give the exact year and current seat equipment alongside the bracket reference. The seat, runners and any supports need to be specified as one complete installation.
Garreth would try the chosen seat with the driver before deciding on the finish. Cameron would record the physical side and supplied runner pattern with the lower fittings. Include any previous seat conversion and the car’s roof arrangement when checking the finished position.
At a glance
- Camaro application reviewed: 1993-2002, using Planted SB059.
- The maker also names Pontiac Trans Am in this specific application.
- Standard physical-left reference SB059DR; physical-right SB059PA.
- Confirm the supplied Standard or Alternate runner pattern separately from side.
- Compare fixed buckets and recliners with the actual car and driver.
- Check current restraints and any affected seat equipment with the installer.
Identify the year and present seat equipment
Start with the model year, original market and present steering position. Keep the 1993-2002 application with the full bracket reference. Include the exact version of the Camaro and any earlier work around the seat.
Photograph beneath the existing seat, including adapter labels and the vehicle mounting points. Record powered features or other connections that the installer needs to identify. The current equipment should be checked before the original assembly comes out.
Use the shared SB059 listing for the exact vehicle
The current Planted left and right pages both name Camaro and Pontiac Trans Am for 1993-2002. That explains the combined name on the linked shop product. State Camaro and its year on the enquiry so the intended vehicle remains clear.
The shared reference does not settle every upper fitting or restraint detail. Specify the precise seat and the parts proposed beneath it. If the car has altered mounting points, have the bracket compared against that present structure.
Include roof configuration and previous changes
Show any repairs or modifications around the seat mounting area. Have their condition and the proposed bracket connection assessed by the installer. Keep existing adapters on the enquiry until their purpose has been identified.
If the car has removable roof panels, say how it is normally used and stored. Check the driving position in that configuration. Choose the exact seat finish with its care instructions and the exposure expected in the car.
Specify the vehicle bracket and upper components together
The linked SB059 product is the vehicle connection for the proposed installation. Select the physical side, then confirm the supplied runner pattern. Cameron would keep the seat-side mounting method beside those references on the quote.
The chosen seat still needs compatible base fittings or side supports. Include any runners and the required hardware in the parts list. Trial the vehicle bracket before assembling the upper components outside the Camaro.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Match physical position and runner pattern
Planted identifies SB059DR as physical left and SB059PA as physical right. The shop’s actual matching variations are labelled RHD Passenger Side and RHD Driver Side respectively. Reconcile the full reference with the steering position and side you intend to change.
The manufacturer offers Standard and Alternate (Cobra/Scheel-Mann) patterns for each side. Standard includes the Recaro slider pattern, while Alternate exchanges it for Cobra/Scheel-Mann. The shop’s side choices do not provide a separate pattern picker, so confirm the intended supplied version.
| Physical position | Standard reference | Alternate reference | Current shop label |
|---|---|---|---|
| Left | SB059DR | COBRA-SB059DR | RHD Passenger Side, SB059DR |
| Right | SB059PA | COBRA-SB059PA | RHD Driver Side, SB059PA |
Compare fixed buckets with the driver
The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E are fixed-back options for the enquiry. Garreth would compare their support with the actual driver. Try the exact seat version in the clothing and equipment used in the car.
Their listings describe base and side mounting options. Confirm the permitted method for the precise seat version, then specify the connections below it. A side-mounted arrangement also needs compatible supports.
Check the shell against the door trim and any console or cage. Include entry and access behind the seat if that space is used. A compatible runner pattern alone does not establish that every seat clears the cabin.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £244.40 Incl. VATFrom £203.67 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Try recliner controls and the movement required
The Sparco R100, Corbeau Sportline RRS and Cobra Misano Anniversary are base-mounted reclining options to compare. Trial the exact model’s support and controls. Include the proposed lower assembly when assessing the finished position.
If access behind the front seat matters, demonstrate the movement needed. Confirm which functions the chosen model provides and how much room they need in the Camaro. A reclining adjustment alone does not establish suitable access.
The linked RRS listing supplies a pair of seats. Each position still needs its own confirmed bracket and any other lower components. Ask for the fittings on both physical sides to be itemised.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,649.00 Incl. VATFrom £1,374.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Confirm the exact Cobra runner pattern
The Cobra Premium runner has 291mm and 405mm handle-type options in the shop. Identify the precise runner and check the attachment dimensions at both interfaces. The handle label alone does not establish the complete mounting pattern.
Planted distinguishes Narrow and Wide Cobra runner patterns. Narrow is included on both bracket versions; Wide calls for Alternate or a separately specified modification. Agree the supplied bracket version with the runner before ordering.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Check the Sparco runner with the selected fittings
The linked Sparco runner is an adjustment component to discuss for the chosen seat. Its upper connection must suit the seat or side supports. Check the lower connection against the supplied SB059 pattern as well.
Try the usable travel and handle access in the completed assembly. Each regular driver needs a suitable position and working lock operation. Include the runner with the seat and supports when checking the finished height.
Match the supports to a side-mounted shell
The linked Sparco steel supports are an option where the seat uses side mounting. Confirm their permitted use and attachment positions against the exact shell. Then specify how they connect to the runners or vehicle bracket.
A base-mounted arrangement uses its own seat-side fittings. Keep that method explicit on the quote so the installer can check each joint. Use the hardware and instructions for the actual components selected.
Trial the position with the car configured for use
Check pedal reach and access to the controls with the actual driver seated. Include any helmet or equipment used with the car. The final height depends on the seat and every component beneath it.
Try entry, exit and any access required behind the seat. Check surrounding trim and any cage through the adjustment range that will be used. Include the usual roof configuration when assessing clearance.
If runners are unnecessary, have the direct mounting arrangement specified separately. Trial the resulting position against the component instructions. Omitting adjustment does not establish suitable height or reach by itself.
Identify the current restraints and affected connections
Show the installer the actual belts, buckles and attachment points. Include any wiring or other seat equipment that needs identifying. Changes made during an earlier conversion belong on that assessment too.
Agree the attachment and connection plan before removing the existing seat. Use the relevant instructions for the components in the car and the proposed replacement assembly. The year and bracket listing alone do not approve every current restraint or electrical arrangement.
Plan a harness with the seat and intended use
Identify the exact harness if one is proposed. Have its routing and anchors assessed with the seat and surrounding structure. Include any cage or other components involved in that installation.
Harness openings in a shell do not establish anchor points in the Camaro. Follow the seat and restraint instructions for the complete combination. Competition use also needs the finished installation checked against the event’s requirements.
Trial the full assembly before final fitting
Planted’s sequence begins with checking the bracket in the vehicle, assembling the upper components outside it and trialling the complete seat assembly. Resolve alignment and access during that trial. Use the actual component and fastener instructions when completing the job.
Send the vehicle details and current mounting photographs with the preferred seat version. Describe the intended use and restraint arrangement. Cameron would keep the physical side, supplied pattern and upper mounting method beside the complete parts list.
- Exact year, original market and current steering position.
- Physical side and photographs of the floor mounts and existing adapters.
- Roof configuration, current seat equipment and any interior or cage changes.
- Preferred seat version and trim, runners and any side supports.
- Driver requirements, rear access and actual or proposed restraints.
Common questions
The current Planted application lists 1993-2002. Give the exact year and present vehicle details with the enquiry. Cars outside that range need their own bracket check.
Planted names both Camaro and Pontiac Trans Am in the SB059 application. State the actual vehicle and year when enquiring. The seat and upper fittings still need specifying for that car.
Specify the exact seat and the connections proposed beneath it. The shared vehicle listing does not settle every upper fitting or restraint detail. Check the complete assembly in the actual car.
SB059DR is Planted’s Standard physical-left reference. The matching shop variation is RHD Passenger Side. Reconcile the full reference with the steering position of the car.
SB059PA is the Standard physical-right reference. The matching shop variation is RHD Driver Side. Keep the complete reference beside the actual position being changed.
The shop variations select side. Planted separately lists Standard and Alternate (Cobra/Scheel-Mann) patterns. Confirm the intended supplied version with the runner choice.
Standard includes the Recaro slider pattern. Alternate replaces that pattern with Cobra/Scheel-Mann. Check the exact runner and its connections to the proposed seat assembly.
The runner listing offers 291mm and 405mm handle-type options. Confirm the actual attachment dimensions with the seat and bracket. The handle label alone does not check the complete pattern.
Planted distinguishes Narrow and Wide Cobra patterns. Narrow is included on both bracket versions; Wide calls for Alternate or a separately specified modification. Agree the exact runner and supplied version before ordering.
The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E are options for the enquiry. Try the exact version with the driver. Check its mounting method and cabin clearance with the complete lower assembly.
The R100, Sportline RRS and Misano Anniversary are base-mounted options to discuss. Trial the exact model’s controls and movement. Include the proposed lower fittings when assessing the final position.
Demonstrate the access required when trying the seat. Confirm the chosen model’s functions and clearance in the car. A reclining adjustment alone does not establish suitable access.
The linked listing supplies two seats. Each physical position still needs its own confirmed bracket and lower components. Ask for the complete fittings on both sides to be itemised.
A side-mounted arrangement needs supports permitted for the exact shell. Check their attachment positions and lower connection. A base-mounted arrangement uses its own seat-side fittings.
Send their reference and attachment dimensions with photographs. Have their condition and both interfaces checked against the new seat assembly. Previous use in the car does not establish compatibility with replacement components.
Trial the driving position in the configuration normally used. Include the actual driver and any helmet or equipment. The finished position depends on the seat and all its lower fittings.
Describe the expected use, exposure and storage. Choose the exact finish with its manufacturer’s care instructions. Do not assume weatherproof construction from the trim name alone.
Check the completed installation in the actual car. The seat, runners and supports affect its finished position. Trial headroom and control reach with the driver.
Have the direct mounting method and hardware specified separately. Trial the resulting position against the component instructions. Omitting adjustment does not establish suitable height or reach by itself.
Identify the actual restraints and any affected seat equipment or connections. Agree the plan with the installer and relevant component instructions. The year alone does not approve every current arrangement.
The harness needs its own routing and anchor assessment with the chosen seat. Follow the restraint and seat instructions for the complete combination. Competition use also requires checking the finished installation against the event’s requirements.
Send the exact year, steering position and physical side with mounting photographs. Include roof configuration, current seat equipment and the preferred replacement seat. Add driver, access and restraint requirements so the full assembly can be checked.
Garreth’s top tip
Garreth would compare the support with the driver before choosing a finish. Try access as well as the driving position. Keep the car’s usual use and storage conditions with the exact trim choice.
Cameron’s fitting view
Cameron would mark physical left or right beside SB059DR or SB059PA, then confirm the supplied runner pattern. Keep the upper mounting method explicit on the quote. Trial the complete seat assembly with the driver and the actual restraints.
Plan your Chevrolet Camaro (1993-2002) seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Sources: Planted’s physical-left and physical-right SB059 applications, installation instructions, pattern guidance and linked shop listings. Confirm the exact vehicle and current component instructions with the fitting enquiry.







