Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Chevrolet Camaro (1982-1992) Bucket Seat and Fitting Guide

Choose the SB058 fitting route for your 1982-1992 Camaro

Planted lists SB058 for the Chevrolet Camaro from 1982 to 1992. Use that specific application when planning an aftermarket seat installation. The bracket connects the car to the agreed upper fittings, with the runner pattern confirmed for the chosen components.

Keep the Camaro’s exact year and current seat arrangement with the enquiry. Planted lists the same-year Firebird/Trans Am separately under SB140. Garreth would try the preferred seat with the driver, while Cameron would identify the lower fittings and physical side before putting the package together.

At a glance

  • Vehicle application reviewed: Chevrolet Camaro, 1982-1992, with Planted SB058.
  • Standard physical-left SB058DR; physical-right SB058PA.
  • The same-year Firebird/Trans Am has a separate Planted SB140 listing.
  • Manufacturer Standard/Alternate pattern selection is separate from the shop side choice.
  • Check the exact bucket or recliner with its supports and any runners.
  • Trial the driving position, access and actual restraint arrangement in the car.

Identify the Camaro and its current seat fittings

Give the model year and original market with the car’s present steering position. The application reviewed here is the 1982-1992 Chevrolet Camaro. Keep those details with the bracket reference throughout the enquiry, including any steering conversion or earlier seat installation.

Photograph what is beneath the existing seat and any labels on its adapters. Mention changes to the floor mounting area. A previous installation may contain components that need identifying before a replacement arrangement can be specified.

Use the exact model listing when comparing brackets

Planted’s current Camaro pages identify SB058DR and SB058PA for physical left and right. Its separate Firebird/Trans Am pages for 1982-1992 identify SB140DR and SB140PA. Order against the exact vehicle application and supplied reference.

Those separate listings are the basis for checking the model on the enquiry. Do not choose a bracket from the other badge’s listing because the cars are related. A car with changed floor fittings needs comparison against its actual structure as well.

Assess the mounting area before choosing the assembly

Show the installer the mounting points and any repaired or altered sections around them. Include photographs of existing adapters and the restraint attachments. Have the condition and connection assessed before adding the proposed components.

If there are changes around the seat, describe the work as precisely as possible. The bracket needs to be trialled against the present car. Keep any parts you want retained on the fitting plan so their removal can be agreed in advance.

Specify SB058 with the complete upper arrangement

The linked SB058 product is the vehicle bracket for this enquiry. Choose its physical side and confirm the supplied pattern before settling the upper fittings. Cameron would put the seat-side mounting method beside the runner model on the quote.

The proposed seat still needs a permitted connection through its base fittings or side supports. Include any runners and the necessary hardware in the package. Check the vehicle bracket in the car before assembling the upper components outside it.

Check the physical side and supplied runner pattern

SB058DR is Planted’s physical-left Standard reference, while SB058PA is physical right. The matching shop variations use RHD Passenger Side and RHD Driver Side respectively. Match the full reference to the position you intend to change, especially on an import or steering conversion.

Planted offers Standard and Alternate (Cobra/Scheel-Mann) patterns on each side. Standard includes the Recaro pattern; Alternate exchanges that pattern for Cobra/Scheel-Mann. The shop’s two variations select side, so the intended pattern version needs separate confirmation.

Planted SB058 side references and separate runner-pattern options
Physical sideStandard maker referenceAlternate maker referenceShop variation label
LeftSB058DRCOBRA-SB058DRRHD Passenger Side, SB058DR
RightSB058PACOBRA-SB058PARHD Driver Side, SB058PA

Try fixed buckets in the intended driving position

The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E are fixed-back options to discuss. Garreth would check their support with the actual driver before choosing a version or finish. Include the clothing and equipment normally used in the car.

Their listings describe base and side mounting options. Confirm the permitted method for the exact seat version, then specify the supports or base connections it requires. Trial that complete arrangement against the space available in the Camaro.

Check the door trim and any console or cage near the seat. Include the route used for entry and exit, with access behind the seat where needed. A bracket’s slider-pattern list does not establish cabin clearance for every shell.

Check reclining options for movement and access

The R100, Sportline RRS and Misano Anniversary are base-mounted seats to compare. Check the controls and backrest movement for the exact model being considered. Include the finished lower assembly when assessing its position in the Camaro.

Explain how the space behind the front seat is used. Trial the movement required to reach it and confirm that the chosen seat provides the relevant functions. A reclining adjustment alone does not settle the rear-access question.

The linked Corbeau RRS listing supplies a pair of seats. Each side of the car still needs its own confirmed fitting assembly. Have the bracket references and any other lower components listed individually.

Match the Cobra runner to the bracket pattern

The Cobra Premium runner listing offers 291mm and 405mm handle-type options. Identify the precise runner and check its attachment dimensions at both ends. Handle width alone does not establish the complete pattern between the seat and bracket.

Planted distinguishes Narrow and Wide Cobra runner patterns. Narrow is included on both bracket versions; Wide calls for Alternate or a separately specified modification. Confirm the intended supplied pattern before ordering the runner and vehicle bracket.

Check runner attachment and adjustment travel

The linked Sparco runner is an adjustment component for the fitting enquiry. Match its upper connection to the selected seat or side supports. Its lower connection also needs to work with the supplied SB058 pattern.

Test the available travel and handle access in the complete assembly. Each regular driver needs a usable position and functioning lock operation. The runner belongs in the height and control-reach check with the rest of the lower components.

Choose supports for the exact side-mounted shell

The linked Sparco steel supports are an option where the chosen seat uses side mounting. Confirm their permitted use and hole positions against the exact shell. Then specify the lower connection to the runners or bracket.

A base-mounted seat uses its own base fittings. Keep the mounting method explicit so the required hardware can be itemised for each joint. Follow the component instructions for the arrangement actually selected.

Trial the complete seat position

Check pedal reach and access to the other controls with the driver seated. Include any helmet or equipment used with the car. The finished height depends on the seat and all the fittings beneath it.

Repeat the clearance check through the adjustment range that will be used. Try entry and exit with the surrounding trim and any cage in place. If there are several drivers, demonstrate the positions each needs.

Discuss direct mounting separately if runners are unnecessary. The installer still needs to confirm the attachment pattern and resulting position. Removing adjustment does not establish the finished height by itself.

Identify each part of the current restraint arrangement

Show the installer the actual belts and buckles, including their attachments. Mention changes made with an earlier seat conversion. Check the condition and routing against the proposed seat position before removing the existing assembly.

Agree the attachment plan for any retained restraint components. Use the relevant instructions and have the complete arrangement assessed. The vehicle-bracket listing does not approve every buckle or belt installation.

Plan the harness independently of the seat bracket

If a harness is proposed, identify the exact restraint and intended use. Have its routing and anchors assessed with the chosen seat and surrounding structure. Include any cage or other component that forms part of that installation.

Harness openings in the shell do not establish anchor points in the Camaro. Follow the seat and restraint instructions for the complete combination. Competition use also requires checking the finished installation against the event’s requirements.

Trial the components and confirm the package

Planted recommends checking the vehicle bracket first, assembling the components outside the car and then trialling the complete seat assembly. Resolve alignment and access during that process. Complete the fitting with the actual component and fastener instructions.

Send the vehicle details and mounting photographs with the preferred seat version. Include the restraint arrangement and how the car will be used. Cameron would keep the physical-side reference and intended runner pattern beside the upper fittings on the final parts list.

  • Exact model year, original market and present steering position.
  • Physical side and current seat-mounting photographs.
  • Repair details, existing adapters and any interior or cage changes.
  • Seat version, trim, proposed runners and any side supports.
  • Driver requirements, access behind the front seat and restraint details.

Common questions

Planted’s current Camaro application covers 1982-1992. Give the exact year and present vehicle details with the enquiry. Cars outside that listing need their own fitting check.

Planted lists the same-year Camaro under SB058 and Firebird/Trans Am under SB140. Use the exact vehicle application and full supplied reference. Changes to the current floor fittings require their own assessment.

Give the steering position and physical left or right with the full bracket reference. Reconcile the shop’s RHD labels with the actual car. Keep those details on the quote when confirming the supplied part.

The application reviewed here ends at 1992. Identify a later car against its own listing. Keep the year and badge with the bracket reference when requesting advice.

Planted’s Standard physical-left reference is SB058DR. The shop’s matching variation is labelled RHD Passenger Side. Confirm the physical position against the steering arrangement of your car.

SB058PA is the Standard physical-right reference. The matching shop variation is RHD Driver Side. Record the complete reference beside the position you intend to change.

The two shop variations select side. Planted separately lists Standard and Alternate (Cobra/Scheel-Mann) patterns. Confirm the intended supplied version for the chosen runner.

Standard includes the Recaro slider pattern. Alternate replaces that pattern with Cobra/Scheel-Mann. Check the exact runner and both connections in the proposed assembly.

The runner listing has 291mm and 405mm handle-type choices. Confirm the actual attachment dimensions with the seat and bracket. The label alone does not check every connection.

Planted distinguishes Narrow and Wide Cobra patterns. Narrow is included on both bracket versions, while Wide calls for Alternate or a separately specified modification. Agree the exact arrangement before ordering.

The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E are options for the enquiry. Try the exact seat version with the driver. Check its permitted mounting method and cabin clearance before selecting the lower components.

The R100, Sportline RRS and Misano Anniversary are base-mounted options. Trial the exact model’s controls and available movement with the finished lower assembly. Include any access needed behind the front seat.

Demonstrate the access needed when trying the seat. Confirm the precise model’s functions and clearance in the car. A reclining adjustment alone does not establish that access arrangement.

The linked product supplies a pair of seats. Each physical position still needs its own confirmed fitting assembly. Have the required brackets, runners and other components itemised separately.

That depends on the permitted mounting method for the exact seat. A side-mounted arrangement needs compatible supports. Check their attachment positions and the lower connection as part of the complete package.

Provide their reference and attachment dimensions with photographs. Have the condition and both interfaces checked against the new seat assembly. An earlier installation does not establish compatibility with replacement components.

Trial the complete arrangement with the actual driver. The seat and lower fittings all affect the finished position. Check control reach and headroom with the equipment used in the car.

Have the installer specify the direct mounting method and required hardware. Trial the resulting driving position against the component instructions. Removing adjustment does not establish suitable height or clearance by itself.

Identify their exact arrangement and show the attachments. Check condition and routing with the proposed seat. The bracket listing does not approve every restraint combination.

The harness needs its own routing and anchor assessment with the chosen seat. Follow the restraint and seat instructions. Competition use also requires the finished installation to meet the event’s requirements.

Send clear photographs and details of the work. Have the condition and proposed bracket connection assessed before fitting. Keep the actual structure and existing adapters on the enquiry.

Provide the year, market, steering position and physical side with mounting photographs. Include the preferred seat and actual or proposed restraints. Add repair details, access requirements and driver information so the whole assembly can be specified.

Garreth’s top tip

Garreth would compare support with the driver in the clothing and equipment used in the car. Try entry and any access required behind the seat. Settle those practical points before choosing the preferred trim.

Cameron’s fitting view

Cameron would keep the Camaro application beside SB058DR or SB058PA and mark physical left or right. Confirm the supplied runner pattern with the upper mounting method. The full assembly needs its own trial with the driver and actual restraints.

Plan your Chevrolet Camaro (1982-1992) seat change

Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.

Back to the Car Seat Selector guide.

Sources: Planted’s left and right Camaro applications, separate left and right Firebird/Trans Am references, installation instructions, pattern guidance and linked shop listings. Confirm the exact car and supplied components with the fitting enquiry.

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text