Chevrolet Camaro (1970-1974) Bucket Seat and Fitting Guide
Plan your 1970-1974 Camaro seat change around SB134
The Planted SB134 application covers the Chevrolet Camaro from 1970 to 1974. Choose the vehicle bracket alongside the precise seat and upper fittings you intend to use. Its physical side and runner pattern are separate choices. Have the complete assembly specified for the car before ordering.
GM’s 1970 factory information describes a four-passenger sport coupe with front bucket seats. For a seat change, Garreth would start with the driver’s support and access requirements. Cameron would check the current floor mounts and restraint arrangement, especially where earlier work has changed the interior.
At a glance
- Listed fitting application: Chevrolet Camaro, 1970-1974, using Planted SB134.
- Standard physical-left reference SB134DR; physical-right reference SB134PA.
- Standard and Alternate (Cobra/Scheel-Mann) are separate manufacturer pattern options.
- Confirm the actual supplied pattern as well as the shop side variation.
- Check rear access and seat controls with the chosen bucket or recliner.
- Assess the current belts and any proposed harness with the complete seat installation.
Keep the SB134 application to 1970-1974
Use the model year when identifying the car. Planted’s current left and right SB134 pages both specify 1970-1974. That is the bracket application covered here. A broader generation description does not extend the listed dates.
The 1967-1969 Camaro has a separate SB036 application. Cars outside the SB134 dates need their own fitting check. Send the vehicle details with photographs of the present mounts, particularly if the car has replacement floor sections or a previous seat conversion.
Use the original seating layout as context
GM’s February 1970 information identifies the Camaro Sport Coupe as a two-door, four-passenger car. Its interior equipment table lists front bucket seats and seat-back latches. That helps explain why access behind the front seats belongs in the seat enquiry.
Describe how you use the rear compartment and the movement you need from the front seat. Check those functions on the precise replacement model. The factory description is 1970 context; confirm the equipment and present condition of your own car.
Show the present mounting points
Photograph both the vehicle-side mounts and the assembly beneath the existing seat. Include any adapter labels and details of earlier work. A seat already fitted to the car can conceal additional brackets or altered connections.
Have the mounting area and any repairs assessed before fitting the new components. Compare the proposed bracket against that actual structure. If you want original parts retained, agree the removal and storage plan with the installer.
Specify the vehicle bracket with the upper fittings
The linked SB134 product is the vehicle-specific connection in the proposed assembly. It needs the correct physical side and a compatible upper mounting arrangement. Cameron would list the seat-side method beside the runner and bracket references on the quote.
Trial the vehicle bracket before assembling the seat outside the car. Follow Planted’s installation sequence and the instructions for the components supplied. Resolve the connections and available space before final assembly.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Separate physical side from runner pattern
Planted identifies SB134DR as physical left and SB134PA as physical right. The shop variations label those actual references RHD Passenger Side and RHD Driver Side respectively. Record the physical position alongside the steering arrangement, including any conversion.
The maker’s Standard pattern includes the Recaro slider pattern. Alternate replaces that pattern with Cobra/Scheel-Mann. The two shop side choices do not provide a separate pattern picker, so confirm the intended supplied version with the runner selection.
| Position | Standard reference | Alternate reference | Shop side label |
|---|---|---|---|
| Physical left | SB134DR | COBRA-SB134DR | RHD Passenger Side, SB134DR |
| Physical right | SB134PA | COBRA-SB134PA | RHD Driver Side, SB134PA |
Choose fixed buckets by support and access
The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E are fixed-back seats to compare. Garreth would try the preferred model with the actual driver before settling the finish. Include the movement you need at the wheel and the way you get into the car.
These listings describe base and side mounting options. Agree the permitted method for the exact seat version, then specify each connection below it. A side-mounted assembly needs compatible supports as part of that plan.
Trial the shell against the door trim and any console or cage fitted to the Camaro. Include access to the rear compartment if it is used. The presence of a compatible slider pattern does not establish cabin clearance for every seat.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £244.40 Incl. VATFrom £203.67 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Check recliner movement in the completed installation
The Sparco R100, Corbeau Sportline RRS and Cobra Misano Anniversary are base-mounted reclining options. Compare their shapes and controls with the available space. Check the exact seat and lower assembly together in the car.
Demonstrate any access required behind the seat. Confirm which functions the chosen model provides and whether you can reach its controls once fitted. Reclining adjustment alone does not establish the movement needed for that access.
The Corbeau RRS listing is a pair of seats. Itemise the bracket and other lower components for each physical position. Match the finish and seat versions before ordering the pair.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,649.00 Incl. VATFrom £1,374.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Identify the Cobra runner before selecting the pattern
The Cobra Premium listing offers 291mm and 405mm handle-type choices. Record the exact runner option and check its attachment dimensions. The handle label is not a complete check of the pattern at both ends of the assembly.
Planted distinguishes Narrow and Wide Cobra patterns. Its notes include Narrow on both bracket versions; Wide calls for Alternate or a separately specified modification. Agree the supplied bracket version before ordering the runner.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Check the Sparco runner at both interfaces
The Sparco runner is a component option for the selected seat assembly. Its upper attachment needs checking against the seat or supports. Match its lower connection to the supplied SB134 pattern as well.
Try the available adjustment with each driver who will use the car. Check handle access and the lock operation in the complete installation. Include the runner when assessing the finished seat position.
Match side supports to the exact shell
The linked Sparco steel supports can be considered where the seat uses side mounting. Confirm the permitted supports and attachment positions for the exact shell. Their lower connections still need checking against the runner or bracket.
For a base-mounted seat, specify its own base connections instead. Have the required hardware listed for each joint in the agreed assembly. Use the instructions for those actual components when completing the installation.
Trial the driving position with the actual driver
Check reach to the pedals and other controls with the seat in its intended position. Include any helmet or equipment used with the car. The seat, supports and runners all contribute to the final height.
Try entry and exit as well as any rear access you need. Check surrounding trim through the adjustment range that will be used. Where a cage or other interior change is present, include that structure in the trial.
If fixed mounting is proposed, have the direct attachment and position specified separately. It still needs to follow the component instructions. Removing runners alone does not establish suitable height or control reach.
Identify the belts actually installed
GM’s 1970 equipment table lists the front shoulder belts separately from the front and rear seat belts. Show the installer the actual straps, buckles and attachments in your Camaro. A later conversion or replacement belt arrangement needs identifying on its own terms.
Check the restraint condition and routing with the proposed seat position. Agree how each component attaches before removing the existing assembly. The SB134 listing does not approve every belt or buckle arrangement.
Specify harness routing and anchors separately
A proposed harness needs an installation plan for the precise restraint and seat. Have its routing and anchor arrangement assessed with the car’s intended use. Include any cage or other structure involved in that installation.
Harness openings in the shell do not establish anchor points in the Camaro. Follow the restraint and seat instructions for the complete combination. Competition use also requires the installation to meet the requirements of the event.
Confirm the complete package before fitting
Planted recommends checking the vehicle bracket first, assembling the components outside the car and then trialling the full seat assembly. Resolve access, alignment and restraint positioning during that trial. Use the fastener instructions for the particular joints and components supplied.
Send the exact year and current mounting photographs with your seat enquiry. Include the physical side and intended use. Cameron would keep the supplied pattern and upper mounting method beside the parts list so the installer can check the whole assembly.
- Model year, original market and present steering position.
- Physical side and photographs of the mounting points and existing adapters.
- Repair or conversion details, including any cage or interior alterations.
- Seat version and trim, runners and any side supports being considered.
- Driver requirements, rear access and the actual or proposed restraints.
Common questions
Planted lists the Chevrolet Camaro from 1970 to 1974 on both physical-side applications. Keep that year range with the fitting enquiry. Give the exact car details before choosing the components.
Use the stated 1970-1974 application. A generation name does not extend those dates. Cars outside the listing need a separate bracket check.
The current Planted application includes 1974. Confirm the actual car and its mounting points. Body appearance or an earlier conversion should not substitute for that check.
The 1967-1969 application uses a separate SB036 reference. SB134 is the 1970-1974 listing reviewed here. Match the year and current floor fittings to the proposed bracket.
It describes a four-passenger sport coupe and lists front bucket seats with seat-back latches. Use that as period context. Confirm the equipment currently installed in your own car.
Tell us how the space behind the front seats is used. Demonstrate the movement you need when trialling the exact replacement seat. Reclining adjustment alone does not establish a suitable access arrangement.
SB134DR is Planted’s physical-left Standard reference. The shop lists its matching variation as RHD Passenger Side. Confirm the intended physical side with the steering arrangement of the car.
SB134PA is Planted’s physical-right Standard reference. The shop’s matching variation is RHD Driver Side. Keep the full reference and actual position beside the seat choice.
The shop variations select side. Planted separately lists Standard and Alternate (Cobra/Scheel-Mann) patterns. Confirm the version supplied for the intended runners.
Standard includes the Recaro slider pattern. Alternate replaces it with Cobra/Scheel-Mann. Check the exact runner and its connections to the chosen seat assembly.
The runner listing has 291mm and 405mm handle-type choices. Check the actual attachment dimensions with the selected seat and bracket. The handle label alone is not a complete pattern check.
Planted distinguishes Narrow and Wide Cobra patterns. Narrow is included on both bracket versions, while Wide calls for Alternate or a separately specified modification. Agree the exact runner and supplied pattern before ordering.
The Monaco Pro, Sprint and TRS-E are comparison options. Try the exact version with the driver and check its permitted mounting method. Cabin clearance and rear access need their own trial.
The R100, Sportline RRS and Misano Anniversary are base-mounted options to compare. Check their controls and available movement with the lower assembly in the car. Confirm the exact model’s functions for any access requirement.
The linked RRS product is a pair of seats. Each position still needs its own confirmed lower components. Ask for both physical-side assemblies to be itemised.
A side-mounted assembly requires supports permitted for the exact shell. Check their seat and lower attachment positions. A base-mounted arrangement uses its own seat-side connections.
Provide the runner reference, attachment dimensions and photographs. Have their condition and both interfaces checked against the new assembly. Prior use in the car does not establish compatibility with the replacement seat.
Trial the actual seat with all proposed lower components. Check headroom and reach with the driver and normal equipment. The bracket listing does not determine the finished position of every combination.
Have the installer specify the direct mounting arrangement and its permitted hardware. Trial the resulting driving position. Omitting adjustment does not by itself establish suitable clearance or height.
Inspect and identify the current straps, buckles and attachments. The factory table lists front shoulder belts separately, but it does not document later alterations. Check the actual restraint arrangement with the new seat.
Specify the exact harness and have its routing and anchors assessed separately. Follow the seat and restraint instructions. Competition use also needs the complete installation checked against the event’s requirements.
Send the exact year and physical side with current mounting photographs and repair or conversion details. Include the preferred seat version, upper fittings and restraint arrangement. Add the driver and rear-access requirements so the complete package can be checked.
Garreth’s top tip
Garreth would try the seat with the driver and include the access needed behind it. Bring the normal driving equipment to that check. Choose the finish after the support and available movement have been assessed.
Cameron’s fitting view
Cameron would confirm physical left or right against SB134DR or SB134PA, then settle the supplied runner pattern. Keep the seat-side connections explicit on the quote. The final trial needs the actual seat assembly and restraint arrangement in the car.
Plan your Chevrolet Camaro (1970-1974) seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Sources: Planted’s left and right SB134 applications, installation instructions, pattern guidance, GM’s 1970 Camaro factory information (General pages 2 and 7) and linked shop listings. Check the exact vehicle and current component instructions with the fitting enquiry.







