Chevrolet Camaro (1967-1969) Bucket Seat and Fitting Guide
Choose a seat and complete SB036 fitting assembly for your Camaro
Planted lists SB036 for the Chevrolet Camaro from 1967 to 1969. It is the vehicle bracket in an aftermarket seat installation. The seat connects through its own base fittings or side supports, with runners where the agreed arrangement uses them. Confirm those interfaces together before ordering the parts.
Start with the Camaro’s exact year and body style, then show us what is beneath the existing seat. A restored or modified car needs checking in its present condition. Garreth would try the preferred seat with the driver; Cameron would keep the physical side and full bracket reference beside the runner choice.
At a glance
- Application reviewed: Chevrolet Camaro, 1967-1969, using Planted SB036.
- Physical-left Standard reference: SB036DR; physical-right: SB036PA.
- Planted lists a separate Alternate (Cobra/Scheel-Mann) pattern for each side.
- The shop side selection and the supplied runner pattern need separate confirmation.
- Fixed buckets and recliners require their own seat-side fitting plan.
- Check the driving position, access and restraint arrangement in the complete installation.
Confirm the year and present floor fittings
Keep the 1967-1969 application with the enquiry. Give the exact model year, body style and original market, and say whether the steering position has changed. Other Camaro generations need their own bracket check. The model name alone does not identify the floor connection.
Photograph the current seat mounts and any labels on an earlier conversion. Mention replacement floor sections or alterations around the mounting points. Have their condition assessed before fitting a new assembly. The supplied bracket needs to be checked against the actual car.
Use SB036 as the connection to the vehicle
The linked Planted listing identifies SB036 for the 1967-1969 Camaro. Choose the physical side first, then agree the upper components for the exact seat. A bracket is one part of that assembly; runners and any side supports need to be itemised with it.
Trial the bracket against the current mounting points before assembling the seat outside the car. If previous repairs or conversions affect that connection, resolve them with the installer. Keep the component instructions and the confirmed hardware with the job.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Record physical side and runner pattern separately
Planted identifies SB036DR as physical left and SB036PA as physical right. The shop lists those references as RHD Passenger Side and RHD Driver Side respectively. For an import or steering conversion, record physical left or right alongside driver or passenger. Match the complete reference to the intended position.
The manufacturer lists Standard and Alternate (Cobra/Scheel-Mann) slider patterns. Standard includes the Recaro pattern; Alternate exchanges that pattern for Cobra/Scheel-Mann. Confirm the supplied version with the intended runner. Selecting a shop side does not settle that separate pattern choice.
| Physical position | Standard maker reference | Alternate maker reference | Current shop side label |
|---|---|---|---|
| Left | SB036DR | COBRA-SB036DR | RHD Passenger Side, SB036DR |
| Right | SB036PA | COBRA-SB036PA | RHD Driver Side, SB036PA |
Try fixed buckets with the driver
The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E are fixed-back options to compare for the enquiry. Try the exact seat version for support and entry. Then check its width and the completed driving position in the Camaro, including clearance to the surrounding trim.
Their listings describe base and side mounting options. Choose the method for the precise seat version and specify the fittings it requires. A side-mounted arrangement needs compatible supports as well as the lower connection. The seat’s instructions determine its permitted attachment method.
Include the clothing and equipment used in the car when checking the position. For a track installation, try the helmet clearance too. A manufacturer’s slider-pattern list does not establish that every shell from that brand fits the cabin.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £244.40 Incl. VATFrom £203.67 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Check recliner controls and rear access
The Sparco R100, Corbeau Sportline RRS and Cobra Misano Anniversary are base-mounted reclining options to discuss. Compare their support and controls with the space available in the car. Check the exact seat version with the agreed lower fittings.
If access behind the front seat matters, demonstrate the movement you need during the trial. Confirm the chosen seat’s available functions and clearance. A reclining backrest alone does not establish a suitable access arrangement for your Camaro.
The linked Corbeau RRS product is a pair of seats. Each physical position still needs its own confirmed lower assembly. Ask for both bracket references and any runners to appear individually on the quote.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,649.00 Incl. VATFrom £1,374.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Choose the finish and plan what to retain
Bring a sample or clear photograph of the interior if the finish matters to the project. The Monaco Pro listing has several trim choices, and the recliners have their own options. Confirm the exact finish and seat version together. Try the support before settling the appearance.
If you intend to retain the original seats, arrange suitable storage and label the removed fittings. Show the installer any original parts you want preserved. Agree the proposed work against the present car; the bracket listing does not guarantee that every previous conversion can be reversed.
Confirm the Cobra runner pattern
The Cobra Premium runner listing has 291mm and 405mm handle-type options. Identify the exact runner and check its attachment dimensions with both the seat and bracket. The handle label alone does not establish the complete bolt pattern.
Planted distinguishes Narrow and Wide Cobra runner patterns. Its notes place Narrow on both bracket patterns, while Wide calls for Alternate or a separately specified modification. Confirm the intended arrangement before ordering. Keep the full supplied references with the seat choice.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Check both connections of the Sparco runner
The linked Sparco runner is another adjustment component to discuss for the selected seat. Check its upper attachment against the exact seat or side supports. Its lower connection also needs to match the supplied SB036 pattern.
Trial the handle and available travel in the completed assembly. Each regular driver needs a suitable position and usable controls. Include the runner in the height check, since the final position depends on all the components beneath the seat.
Specify side supports for a side-mounted seat
The linked Sparco steel supports are a component option for a side-mounted arrangement. Check their hole positions and permitted use against the precise shell. Then specify their connection to the runners or vehicle bracket.
A base-mounted recliner uses a different seat-side connection. Have the installer itemise the arrangement actually selected. The supports, runners and bracket each need compatible fasteners and instructions for their respective joints.
Trial reach, height and clearance
Sit in the complete assembly before finalising the position. Check the controls you use through their normal travel and confirm that the seat locks where adjustment is fitted. Include the actual driver and any helmet used with the car.
Check clearance around the seat, its adjustment controls and the door trim. Repeat the access check with the seat in the intended position. If there is a cage or other interior modification, include that structure in the trial.
Discuss fixed mounting separately if fore-aft adjustment is unnecessary. The direct attachment and driving position still need checking against the component instructions. Omitting runners by itself does not prove a suitable finished height.
Identify the current belt arrangement
Show the installer the exact belts, buckles and attachments currently in the Camaro. Include any changes made during restoration or an earlier seat conversion. Check their condition and position with the proposed seat assembly.
Agree how each restraint component will attach before removing the existing seat. The vehicle bracket listing does not approve every buckle or belt arrangement. Follow the relevant component instructions and have the complete installation assessed.
Plan a harness with its own mounting requirements
If a harness is proposed, choose the exact restraint with the seat and the car’s intended use. Have its attachments and belt routing assessed against the harness and seat instructions. Include any cage or other structure that forms part of the plan.
Harness openings in a seat do not establish suitable anchor points in the Camaro. A seat bracket is also not a harness approval. For competition use, check the complete proposed installation against the requirements of the event before buying the package.
Trial the components before final assembly
Planted’s installation sequence starts with checking the bracket in the vehicle. Assemble the proposed seat components outside the car, then trial the complete assembly. Resolve alignment, control access and restraint positioning before the final fitting.
Use the instructions for the actual components and fasteners supplied. The permitted hardware and tightening requirements depend on the joint. Have a qualified installer complete the work and check the finished adjustment, clearances and restraint arrangement.
Send the details needed for the complete package
Send the model year and body style with photographs of the existing floor fittings. State the steering position and physical side, including any conversion or repair details. Add the preferred seat version and the intended use of the car.
Cameron would record the bracket pattern beside the runner reference and seat-side mounting method. Garreth would keep the driver and access requirements with the seat choice. Ask for the necessary lower components and hardware to be listed before ordering.
- Exact Camaro year, body style, steering position and physical side.
- Current mounting photographs and details of repairs or earlier conversions.
- Seat version and trim, proposed runners and any side supports.
- Existing or proposed restraint arrangement and the intended use.
- Driver position, access requirements and any cage or interior changes.
Common questions
The fitting application reviewed is Planted SB036 for the 1967-1969 Chevrolet Camaro. Give the exact year and body style when enquiring. Later generations need their own bracket check.
Show the installer the current mounting points and any alterations. The bracket connection needs checking against the actual car. Have repair condition and the proposed installation assessed before ordering.
Planted lists SB036DR as physical left. The shop’s matching child reference appears under RHD Passenger Side. Confirm the physical position with the steering arrangement of your car.
Planted lists SB036PA as physical right. The shop’s matching child reference appears under RHD Driver Side. Keep the full reference and physical side on the quote.
The shop’s two variations select the side. Planted separately lists Standard and Alternate (Cobra/Scheel-Mann) patterns. Confirm the supplied pattern for the intended runners before ordering.
Standard includes the Recaro slider pattern. Alternate replaces that pattern with Cobra/Scheel-Mann. Check the exact runner and both mounting interfaces with the supplied bracket version.
The shop offers 291mm and 405mm handle-type choices. Check the actual runner attachment dimensions with the seat and bracket. The handle label alone does not establish every connection.
Planted distinguishes Narrow and Wide runner patterns. Its Narrow pattern is included on both bracket versions; Wide calls for Alternate or a separately specified modification. Agree the exact runner and supplied pattern before ordering.
The Monaco Pro, Sprint and TRS-E are options for the fitting enquiry. Try the exact seat version with the driver. Check cabin clearance and the complete mounting method before buying the components.
The R100, Sportline RRS and Misano Anniversary provide base-mounted options to discuss. Trial the chosen seat’s controls and backrest movement in the car. Include the agreed lower assembly in that check.
Demonstrate the access you need when checking the seat. Confirm the precise model’s functions and its available movement in the Camaro. A reclining backrest alone does not establish the required access.
The linked product is a pair of seats. Each position still needs its own confirmed bracket and any other lower components. Ask for those parts to be itemised separately.
A side-mounted seat arrangement needs compatible supports. Check their hole positions and permitted use against the exact shell. A base-mounted arrangement uses its own seat-side connections.
Send their reference and attachment dimensions with photographs. Check their condition and both connections against the proposed seat and bracket. The earlier installation does not establish compatibility with the replacement parts.
Trial the complete assembly in the actual car. The seat, runners and supports affect the finished position. Check reach and headroom with the driver and any equipment used.
Discuss fixed mounting with the installer and the component instructions. The attachment pattern and driving position require their own checks. Removing runners does not by itself establish suitable height or clearance.
Identify their exact arrangement and show the attachments. Have their condition and position assessed with the proposed seat. The bracket listing does not approve the complete restraint installation.
Specify the exact harness and have its attachment plan assessed separately. Follow the seat and harness instructions, including belt routing. Competition use also needs the complete installation checked against the event’s requirements.
Tell the installer which original parts you want to retain. Label removed fittings and arrange suitable storage. Check the proposed work against the present car before assuming every earlier conversion can be reversed.
Send the year, body style, physical side and steering position with current mounting photographs. Include the preferred seat version and restraint arrangement. Add access requirements and any repair or conversion details so the lower components can be specified together.
Garreth’s top tip
Garreth would try the preferred seat with the driver before choosing the trim. Include entry and any access needed behind the seat. If original parts are being retained, agree how they will be removed and stored as part of the job.
Cameron’s fitting view
Cameron would write physical left or right beside SB036DR or SB036PA, then confirm the supplied runner pattern. The quote should also name the seat-side mounting method and required lower components. Trial the finished assembly with the driver and the restraint arrangement.
Plan your Chevrolet Camaro (1967-1969) seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Sources: Planted’s physical-left and physical-right Camaro applications, installation instructions, pattern notes and linked shop listings. Confirm the exact vehicle and supplied components with the fitting enquiry.







