Cadillac CTS-V 2009 to 2014 Bucket Seat and Fitting Guide
Identify the body and original seat before choosing fittings
Which fittings should you choose when changing the front seats in a 2009 to 2014 Cadillac CTS-V? Planted names the SB164 bracket for this application. Start the enquiry with the exact body and the seats fitted to your car now.
Garreth would ask what you want to change about the driving position before choosing a replacement seat. Cameron would compare the original mounts with the proposed lower assembly. Include the full seat reference, especially if you want to retain a factory seat.
At a glance
- SB164 names Planted’s Cadillac CTS-V 2009 to 2014 application.
- The linked shop bracket carries a four-door model attribute; give us the exact body before selecting fittings.
- Maker references identify SB164DR as physical left and SB164PA as physical right.
- Include the build, market, steering side and original seat specification.
- Confirm the full seat, runner or fixed connection, supports and hardware for each position.
- The named 345mm by 271mm Sparco drawing shows seat-side centres; the Cadillac floor needs its own measurements.
Identify the body and the seats fitted now
Tell us whether your CTS-V is a four-door saloon, coupe or wagon. Include the build and original market with the actual steering side. Photograph the present seat mounts and any previous adapters.
The linked shop bracket carries a four-door model attribute.
Send the original seat specification and the full reference of anything you want to retain. Cameron would check a factory Recaro enquiry against that particular seat and lower connection. Include the adjustment and access you want after the change.
Keep the SB164 application with the exact body
Planted names the CTS-V 2009 to 2014 application in its SB164 records. Confirm the exact body and original mounting arrangement with the supplied bracket version. The saloon, coupe and wagon need their own body details in the enquiry.
Give an ordinary CTS or another year its own fitting enquiry.
The shop uses RHD seating-side variation labels. Planted describes brackets developed from LHD vehicles and asks for checks on other markets. Match the full supplied code to the physical position and actual steering arrangement.
| Physical position | Manufacturer reference | Cobra alternate reference |
|---|---|---|
| Left | SB164DR | COBRA-SB164DR |
| Right | SB164PA | COBRA-SB164PA |
Choose the complete SB164 reference for each position
The linked card is the Planted bracket listed for Cadillac CTS-V 2009 to 2014. Its maker references are SB164DR for physical left and SB164PA for physical right. Confirm the body and complete supplied code before selecting the shop variation.
Cobra-prefixed alternate references are listed for both physical positions.
Keep the chosen bracket with the exact seat and upper fittings on the parts list. Include the runner or fixed connection and any required supports. Confirm the retained buckle hardware and quantities separately for each front seat.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Select the runner pattern with the exact seat references
Planted provides Standard and Alternate slider patterns. Its FAQ directs wide Cobra and Scheel-Mann runners to the Alternate pattern. Narrow Cobra runner fixings are included on both versions.
The SB164 records include Cobra-prefixed references for both physical sides.
Send the full seat and runner references before choosing the pattern. Compare the upper seat connection and lower bracket connection independently. Cameron would keep the selected pattern beside the complete supplied code on the enquiry.
Compare fixed-back seats by support and mounting route
The Cobra Monaco Pro is a fixed-back steel-frame candidate with listed base and side mounting choices. Try the cushion and support with the driver. Confirm the actual version and selected lower arrangement together.
The standard Sparco Sprint card uses the BRR0003 family reference; its maker catalogue shows base and side fixing routes.
The OMP TRS-E Velour is another steel-frame choice with both routes listed. Compare bolster access and the position you want in the CTS-V before choosing the finish. Garreth would put the driver’s support and entry first in that comparison.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £244.40 Incl. VATFrom £203.67 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Try reclining choices with their controls and lower fittings
The Sparco R100 is a base-mounted reclining option to try. The shop record linked here uses legacy 00961NR, while the newer catalogue names the 009014 family. Confirm the actual supplied version before choosing fittings from its drawing.
The Corbeau Sportline RRS card is a pair of seats on the listed standard base. Each physical position needs its own CTS-V bracket and upper assembly. Confirm the package contents and quantities for the complete order.
The Cobra Misano Anniversary has its own reclining mechanism, shell and trim choices. Trial the controls and backrest movement beside the actual door and tunnel. Include any access needed behind the front seats in that trial.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,649.00 Incl. VATFrom £1,374.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Match the Cobra runner to both connections
The Cobra Premium runner listing offers 291mm and 405mm handle-width options. Match the actual runner to the seat and supplied bracket’s slider pattern. The handle label alone cannot identify the complete fixing layout.
Send the full Monaco or Misano reference with the runner enquiry.
Check the upper seat connection and lower bracket connection as separate interfaces. Trial the required movement and release-handle access in the CTS-V. Include the runner’s thickness when comparing the complete driving position.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Specify the Sparco slider with the actual seat version
The Sparco 0049306 runner is a sliding option to discuss with the named Sparco seats. Its catalogue shows a 271mm longitudinal fixing distance. Confirm the entire upper and lower layout with the supplied seat, supports where used and selected bracket version.
The named Sprint and R100-family seat-side base fastenings below are 345mm by 271mm.
Trial both rails through the travel required by the driver and check that they release and lock together. Include the handle and surrounding trim throughout that movement. A shared dimension at one connection leaves the other interfaces to verify.
Use supports specified for the chosen side-mounted shell
For a side-mounted shell, supports join the seat’s side fixings to the lower assembly. The Sparco steel supports shown here are a candidate for the exact Sparco shell and its instructions. Use another seat family’s own confirmed support combination.
The shell’s side fixings and the support’s lower pattern each need their own reference.
Cameron would check the exact shell, support orientation and specified fasteners before comparing the lower connection. Include any runner and the supplied SB164 version in that drawing comparison. The vehicle application alone cannot specify those upper components.
Plan fixed positioning as its own complete arrangement
Planted publishes separate installation arrangements for base-mounted and side-mounted seats, with and without sliders. Its FAQ describes its own side mounts with sliders beneath them. Ask us to specify the complete fixed arrangement if adjustment is not required.
Removing a runner changes the connection and finished position.
Trial the selected components in the actual car using the relevant instructions. Check pedal and steering reach with the driver. Garreth would also try getting over the bolster and the access needed behind the seat.
See the named Sparco seat-side centres at one scale
The named Sprint and R100-family lower fastenings in the Sparco catalogue measure 345mm across and 271mm front to rear. Both dimensions use the same scale in the drawing. Confirm the exact supplied seat version before choosing components around those centres.
The CTS-V floor, full selected bracket slot layout and outside shell dimensions need separate measurements.
Trial the preferred seat and complete lower assembly in the cabin. Include shoulder room and access to the controls beside the actual trim. A Cobra, Corbeau or OMP choice needs that exact version’s drawing for its own seat connection.
Source: Sparco 2025 manufacturer catalogue, printed pages 178 and 326 to 327. The shop’s R100 reference needs supplied-version matching.
Choose the restraint with the shell and actual anchors
Include the intended belt arrangement before the lower fittings are finalised. Match the exact shell and restraint instructions to the actual anchors and driver. Photograph the existing buckle connection and retained hardware.
For a harness enquiry, show any proposed bar or cage and its specified attachments.
Check the shell openings, strap configuration and anchors as one arrangement. Trial routing and buckle access with the seat in its intended position. Choose a harness product once that configuration has been established.
- Original belt: check the exact shell, buckle position and retained mounting hardware.
- Harness: confirm the required straps, shell openings and available anchor arrangement together.
- Two seats: specify each physical side, quantities and the adjustment needed by each occupant.
Send the body and original seat details with the enquiry
Send the exact body, build, original market and steering side. Include photographs of the seat mounts and any previous adapters. Give the full reference of an existing seat you want to retain.
Describe the adjustment and access wanted, together with the retained belt arrangement.
List the proposed seat and lower components by their complete references. Trial the assembled position with the driver before confirming reach and clearance. Cameron would compare that arrangement with the actual CTS-V floor connections.
Common questions
Which CTS-V application does SB164 name?
Planted names Cadillac CTS-V 2009 to 2014. Send the exact body, build, market and mounting photographs. Confirm the supplied package against the actual car and proposed seat.
Which body details should I send?
Tell us whether the car is a four-door saloon, coupe or wagon. The linked bracket carries a four-door shop attribute. Confirm the exact body and mounting arrangement before selecting the supplied version.
Can I keep a factory Recaro seat?
Send its full reference and photographs of the original lower fittings. Ask us to check that seat and the proposed bracket connection together. Include the functions and adjustment you want to retain.
How do I match the shop seating-side variation?
Give the actual steering side and physical seat position. The maker references identify SB164DR as physical left and SB164PA as physical right. Match the full supplied code before selecting the variation.
Which alternate references are listed?
The maker records list COBRA-SB164DR for physical left and COBRA-SB164PA for physical right. Confirm the selected runner pattern and complete package. Match both fixing interfaces to the chosen seat.
How do Standard and Alternate runner patterns differ?
Planted’s general FAQ directs wide Cobra and Scheel-Mann runners to the Alternate pattern and includes narrow Cobra runner fixings on both. Send the full seat and runner references. Confirm the supplied version within the selected CTS-V bracket family and both fixing interfaces.
Does the RRS pair include two CTS-V brackets?
The linked card describes a pair of seats on the named standard base. Specify a vehicle bracket and selected upper assembly for each physical side separately. Confirm current contents and quantities before ordering.
Can I specify a fixed seat position?
Ask us to specify the full fixed arrangement for the exact seat and car. Planted publishes separate installation arrangements with and without sliders. Check the connections and final position for the chosen assembly.
What does the scaled 345mm by 271mm drawing show?
It shows named Sparco seat-side lower fastening centres in the maker catalogue. The actual CTS-V floor and full selected bracket layout need separate references. Match the supplied seat version and every remaining interface.
What if the original mounts have been changed?
Photograph the original locations and current adapters or floor alterations. Include the previous component references where known. Check the named application against the floor and assembly the car actually has.
How much lower will the replacement seat sit?
Compare the current position with a trial of the complete proposed assembly and actual driver. The cushion, shell angle and lower components all contribute. The bracket code alone cannot predict a reduction.
What completes the seat and fitting enquiry?
Send the chassis identification, body, build, steering side and mounting photographs. Include the exact seat and fitting references, access and adjustment wanted, retained functions and belt arrangement. Show any previous adaptations.
Garreth’s top tip
Garreth would start with what you want to change about the present seat. Try the replacement with the driver and include the access needed in your particular body style. Keep the chosen seat beside its complete lower assembly on the enquiry.
Cameron’s fitting view
Cameron would compare the body and original seat details with the SB164 application first. Confirm the physical side and selected runner pattern against the supplied bracket version. Trial the complete position with the actual driver.
Plan your Cadillac CTS-V 2009 to 2014 seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Sources: Planted application records, slider-pattern and market guidance and assembly-specific instructions; Sparco 2025 catalogue, printed pages 178 and 326 to 327; linked shop listings. Confirm the current supplied versions and actual car before completing the package.







