Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

BMW 3 Series Touring F31 Bucket Seat Guide

Supportive seats for the F31 Touring

The F31 Touring brings the estate body to this generation of the BMW 3 Series. Its front seat choice may need to suit the drive to a circuit as well as regular journeys with passengers and luggage. Start with the support and adjustment you need, then work through the fittings for that seat.

Cobra and Planted both have an F31 application, and RECARO’s own table also names the Touring for its 69.02 console. Garreth would compare a Nogaro with the recliners before deciding. Cameron would check the complete mounting arrangement against the car and the physical seat side.

Front three-quarter view of an illustrative modified silver BMW 3 Series Touring F31 with bucket race seats and blue harnesses
Illustrative modified BMW 3 Series Touring F31, not a customer installation.

At a glance

  • Vehicle: F31 Touring; keep the chassis, year and physical seat side on the enquiry.
  • Cobra: our F31 listing belongs to the maker’s F3x application, with Nogaro-specific side mounts required for a Nogaro shell.
  • Planted: SB223 explicitly lists F31; choose the slider pattern with the runner.
  • RECARO: 69.02.19 left / 69.02.29 right, with specific seat variants in the maker’s application table.
  • Measure the full installation in the car, including the frame, runner, seat and any side mounts.

The Cobra tailored frame for the F31

Our F31 Cobra listing is the tailored route to compare for a Nogaro or Cobra recliner. The maker’s reference sheet identifies the F3x family as SU-BMW-F3X-01L/R and maps it to FRM-06. Confirm the actual side and seat version with the order.

Cobra’s FRM-06 drawings show Premium runners with a narrow or wide handle, plus a spacer bar and seat-dependent belt bracket. Check the complete supplied assembly before adding a separate runner set. A Nogaro also needs its own Nogaro side mounts, ordered separately.

Nogaro Circuit, Street and Club Sport

Compare the Nogaro versions by belt routing as well as trim. The Street has no harness slots; the Circuit and Club Sport provide harness-slot options. Garreth would try the shell first, then choose the version that suits the intended belt arrangement.

All three need the fitting hardware checked with the actual seat version. The shoulder bolsters and lower sides are separate clearance checks in the car. A listed vehicle frame does not establish that every driver and seat position will suit the shell.

Nogaro-specific side mounts

Cobra specifies separate Nogaro side mounts for its tailored-frame Nogaro applications. Use the Nogaro-specific fittings when matching the shell to the lower assembly. Confirm the supplied quantity and the hardware needed for a complete seat position before ordering.

Cameron would trial-position the shell with the mounts and runner together. Check the release handle, door-side bolster and buckle clearance through the useful sliding travel. Set the driving position before judging the final height.

The Cobra Le Mans reclining route

The Le Mans is a base-mounted Cobra recliner to try alongside the fixed Nogaro shell. Its moving backrest changes how you set the seat for a longer journey. Check the actual seat version against the tailored frame and handle arrangement.

Garreth would sit in both before deciding which support feels right. Cameron would try the recliner controls beside the console and door with the complete lower assembly fitted. Include how much adjustment each driver needs when you send the enquiry.

Identify the Cobra runner and handle

Use this runner listing to identify the Cobra Premium sliding assembly when checking kit contents or an existing conversion. Cobra publishes narrow and wide FRM-06 drawings. The tailored frame assembly already shown in those drawings should be checked before another slider is added.

Cobra base-mount centres, drawn to scale

Cobra’s mounting guide gives a narrow base pattern of 292mm across and 330mm front to back. The drawing below shows those seat-side centres to scale. It is a reference for the base-mounted route and does not describe a Nogaro shell’s side fixing holes.

Seat-side bolt centres 292 by 330 millimetres, drawn to scale292mm across330mm front to rearSeat-side bolt centres; outer frame outline is schematic

Cobra also publishes a 405mm-wide arrangement. Match the current seat and FRM-06 drawing before choosing the handle width. The outline is schematic and does not show BMW floor bolt positions.

The Planted SB223 route

Planted explicitly lists the F31 in its SB223 3 and 4 Series application. This vehicle bracket provides the floor connection for a separate matched seat assembly. For the Sparco and Expert S examples below, identify the runner and any side mounts before ordering.

Order by physical left or right as well as steering side. Planted’s driver/left label follows left-hand drive, so a UK driver sits on the other physical side. Send photographs of any previous conversion with the car details.

Confirm the physical side of the car

Our Cobra and RECARO listings offer UK driver and passenger selections. Cobra’s FRM-06 drawing is arranged for the UK driver, with the spacer bar and seatbelt bracket moved to opposite sides for the passenger arrangement. Keep the chosen seat model with that side selection.

Cameron would check the buckle position and access to the runner release with the assembly in place. The part name alone cannot show the clearance around an existing conversion. Photograph the current mounts and the space beside the console if the interior has already been changed.

Choose the Planted pattern with the runner

Planted’s standard pattern includes the RECARO slider connection; its alternate replaces that with the Cobra/Scheel-Mann connection. Choose the bracket version with the exact runner. The narrow and wide Cobra runners have different requirements in Planted’s instructions.

For a wide Cobra runner, compare the alternate-pattern SB223 before planning any alteration to the standard bracket. Cameron would want the runner model and photographs of its fixings if you already own the parts. Confirm the whole connection before ordering the remaining fittings.

Sparco buckets on the Planted route

The Sprint Retro and Sprint Sky give you two finishes to compare in the Sprint family. The Evo QRT Sky is a side-mounted shell and adds compatible side mounts to the assembly. Garreth would try the cushion and backrest shape of each before selecting the finish.

Match the actual Sprint version and mounting choice to its runner. With the Evo, check the side mounts at both the shell and slider connections. Trial-position the full assembly for pedal reach, steering-wheel reach and shoulder clearance in the car.

The sliding runner for a Sparco assembly

The Sparco sliding runner is the separate slider to compare for the Sparco examples above the SB223. Match the connection to the chosen seat base or side mounts. Try the release and locking action throughout the travel with the complete assembly in the car.

Side mounts for the Evo QRT Sky

These Sparco steel side mounts are the fittings to compare for the Evo QRT Sky. Check the shell connection, runner connection and adjustment available through the complete stack. Cameron would establish the angle and height with the assembly in the car, including shoulder and door-side clearance.

Recliners to compare above the Planted bracket

The Sparco R100 and GT offer different cushion and backrest shapes to try, while the RECARO Expert S has adjustable backrest side bolsters. These examples use their own matched runner connection above the Planted bracket. The Expert S shown here belongs to this Planted route.

Garreth would set the backrest to a normal driving position and spend time sitting in each option. Cameron would then check the adjustment controls and the travel needed by each driver. Check the finished height with every fitting beneath the cushion.

A Recaro-width runner for the Expert S

The Endurance RECARO-compatible runner is the slider to compare for the Expert S on a standard-pattern Planted SB223. Check every connection through the seat, runner and bracket. Keep this assembly distinct from the RECARO 69.02 console route below.

Measure the Expert cushion and the space above it

RECARO’s Expert S/M drawing gives a maximum cushion envelope of 520mm wide and 545mm deep. Those dimensions exclude mounting hardware. The maximum overall seat height is 820mm, with shoulder clearance checked separately in the car.

RECARO Expert S and M maximum cushion envelope, 520mm wide and 545mm deep, drawn to scale520mm maximum cushion width545mm maximum cushion depthExpert S/M cushionPlan envelope, not a seat templateRECARO dimensions exclude all mounting hardware

Use this cushion envelope when measuring the F31, then check the actual seat’s shoulders and controls separately. The frame and runner sit outside these seat-only dimensions. Measure the completed assembly in its intended driving position.

The mounting order through the car

Planted’s installation instructions start with a trial fit of the vehicle bracket, followed by the seat assembly and a check of the complete position.

  • Planted base-mounted sliding seat: F31 floor, SB223, matched runner, seat.
  • Planted side-mounted sliding shell: F31 floor, SB223, matched runner, compatible side mounts, shell.
  • Cobra tailored route: use the maker’s FRM-06 assembly layout for the chosen seat and physical side, adding Nogaro-specific mounts for a Nogaro.
  • RECARO console route: match the exact seat variant and vehicle type to the console instructions before selecting the remaining hardware.

Follow the current instructions for the actual components, checking the floor connection and every fixing above it before the assembly is finally tightened.

The seat-specific RECARO 69.02 console

RECARO’s application table names the F31 Touring, types 3K and 3K_N1, for 2012 to 2018. It gives 69.02.19 for the physical left and 69.02.29 for the physical right. Match the car’s exact type and the chosen seat column before ordering.

The table lists the SAB variants of Sportster CS, Cross Sportster CS and Ergomed E/ES for this row. The Expert S example on this page uses the Planted route. Cameron would match the console instructions and remaining hardware to the exact RECARO seat version.

The RECARO variants named for this console

These listings identify the SAB versions of Sportster CS, Cross Sportster CS and Ergomed E. Try the cushion and backrest support with the intended driving position. Confirm the precise variant, physical side and complete fitting arrangement alongside the console.

Select the harness around the completed seat installation

The TRS Clubman four-point options give you clip-in or bolt-in end fittings to discuss with the intended anchor arrangement. The Schroth Profi 3×2 is a six-point option for an appropriate shell and full installation. Choose the seat and belt routing together, including the crotch-strap provision needed for a six-point belt.

Send photographs of the space behind the seats with the enquiry. Follow the harness maker’s current fitting instructions for the anchors and routing. A cage tube or harness bar is an anchor only where its maker specifies that use.

Details for your F31 seat enquiry

Send BMW 3 Series Touring F31, year, steering side, physical seat side and the exact seat model, plus your height and waist. Include photographs of the current mounts and clearance beside the tunnel and door. Say whether the car needs adjustment for more than one driver.

For a Touring used with rear passengers or luggage, include how that space is used. Show the area behind the front seats when discussing a harness installation. Match the belt route and anchor arrangement to the seat before deciding on the hardware.

Common questions

The BMW 3 Series F31 Touring. Keep the body code and year on the enquiry so the fitting route is matched to the actual car.

For a Cobra Nogaro, compare the Cobra tailored frame and Nogaro mounts. For the Sparco and Expert S examples, compare the Planted SB223 assembly. The RECARO 69.02 console has a separate seat-specific application.

Cobra’s FRM-06 assembly drawings show Premium runners. Confirm the supplied kit with the chosen seat and physical side before adding another set. Nogaro side mounts remain a separate item.

The Street has no harness slots. Compare a harness-slot Nogaro version and plan the belt routing and anchors with the intended seat.

Match the seat column in the application table. For this row RECARO lists SAB versions of Sportster CS, Cross Sportster CS and Ergomed E/ES. The Expert S shown here uses a separate Planted assembly.

Planted’s left-side driver label follows left-hand drive. Order by the physical side and steering position; keep that distinction when comparing left/right RECARO part numbers.

Measure the seat, frame, runner and any side mounts as one installation in the car. Check the shoulders and controls separately from the cushion dimensions.

Garreth’s top tip

I would compare the Nogaro with the recliners before choosing seats for an F31 that still does regular journeys. Sit in them with the backrest set where you normally drive. The trim can follow once you know which cushion and backrest support suit you.

Cameron’s fitting view

I would start with F31, year, physical side and the exact seat variant. The three frame routes have different fitting arrangements, so I would check the complete assembly for that choice. I would then trial-position it for reach, height and clearance before the fixings are finally tightened.

Plan your BMW 3 Series Touring F31 seat change

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text