Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Audi Planted Technology Seat Brackets Are Now Available

Fitting brackets, December 2020

Planted Technology seat brackets are now available for a wide range of Audi models. A Planted bracket bolts to the car's own seat mounting points and gives you a flat, slotted steel base for an aftermarket seat, with or without runners.

The Audi range runs from the A3 to the A7 and the S3 to the S7, through all three generations of TT and both generations of R8, back to the original Quattro and the Audi 4000.

  • New in December 2020: Planted Technology seat brackets for Audi
  • Models: A3 to A7, S3 to S7, TT Mk1 to Mk3, R8, Quattro and 4000
  • Planted brackets are car specific steel and use the factory seat mounting points
  • Slotted for runners from most major seat brands
  • Sold per side: a pair of seats needs a driver side and a passenger side bracket
A black suede reclining seat bolted into a right hand drive coupe on a flat black steel floor bracket with a sliding runner between bracket and seat
A reclining seat on a flat steel floor bracket and runner in a right hand drive coupe. A later photo, and not an Audi.

What a Planted bracket does

Take out a factory seat and the replacement needs something that bolts into the car. A Planted Technology bracket does that job. Each one is made for a particular car, so it uses the factory seat mounting holes and the floor does not need cutting or drilling.

The top of the bracket is flat and slotted to suit the runners from most of the major seat makers, including Cobra, Corbeau, OMP, Recaro, Sabelt and Sparco. That is why we recommend Planted with so many of the seats we sell. A few seat and runner combinations need extra holes drilling in the bracket itself, and Planted leave room for that.

Planted make the brackets in the USA from 3/16 inch steel, finished in black. Many carry a tab for the seat belt buckle, as on this one.

Brackets are made per side. A bucket seat bolts on with side mounts, and runners can go between the bracket and the side mounts if you want the seat to slide. Planted say runners add about 3/4 of an inch of height, so fixing the seat directly sits it lowest.

A black Planted Technology steel seat bracket with a seat belt tab and slotted mounting holes, on a white background
A Planted Technology seat bracket. Planted product photo.

The Audi models covered

The range covers the A3 to A7 and S3 to S7, the TT in all three generations, the R8 in its first and second generations, the original Audi Quattro of 1980 to 1991, and the Audi 4000, the North American name for the B2 Audi 80. The Q7 first generation is covered too.

The TT is a good example of why the exact car matters. Audi used the name on three structurally different cars, and each takes its own bracket; none of them swap. The same goes across the A and S models, where generations change the floor. Send us the registration and we will confirm the right part.

Right hand drive and airbags

Planted design on left hand drive cars. Where a right hand drive car has the same floor the brackets still fit, but the sides swap, so we list them by UK driver and passenger side.

Many Audis have seat airbags or occupancy sensors in the factory seats. Aftermarket seats do not, and Planted point out that the airbag warning light will come on when they are removed. Garreth’s advice is to sort that out as part of the job, not after it. Our Audi TT Mk1 seat guide shows how the pieces go together on one car.

The A3 to A7, S3 to S7, TT Mk1 to Mk3, R8 first and second generation, Q7 first generation, the original Quattro and the 4000.

No. Each of the three TT generations takes its own bracket.

No. Planted brackets bolt to the factory seat mounting points.

Planted note that aftermarket seats have no airbags, so the warning light will show once the factory seats are out.

💬
New for AudiPlanted Technology brackets

Car specific steel brackets that use the factory seat mountings.

Need a personal recommendation?

We're here to ensure you pick the right seat. Contact us today.
Our showroom virtual walk through!
Have a walk around our showroom before you even buy your new seats. 
Our hands on experience, is what allows us to bring you our recommendations.
Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text