Acura TSX 2009 to 2014 Bucket Seat and Fitting Guide
Choose the seat position for your second-generation TSX
Planning a seat change for a 2009 to 2014 TSX? Garreth would start with the support you want on your usual journeys. Compare a reclining seat with a fixed bucket, then try the entry and sitting position with the driver. Keep the complete fitting assembly beside that choice.
Cameron would ask for the body style, model year and gearbox before choosing the lower parts. We list the Planted SB276 bracket for the second-generation TSX. Include the original market and physical seat position in the enquiry. The references below help us work through the bracket, runner and seat together.
At a glance
- Named bracket application: Acura TSX second generation, 2009 to 2014, Planted SB276.
- Body details: identify the saloon or Sport Wagon and ask us to confirm the exact application.
- Physical sides: SB276DR is left; SB276PA is right, using the manufacturer references.
- Runner pattern: specify Standard or Alternate with the exact upper components.
- Driving position: include pedal travel, gear-lever reach and the adjustment each driver needs.
- Belts and harnesses: discuss the seat, buckle or attachment arrangement and intended use together.
Identify the body style and gearbox with the model year
The 2009 TSX introduced the second generation as a saloon, with a six-speed manual or five-speed automatic in the launch range. The Sport Wagon joined for the 2011 model year. Acura describes that wagon with a 2.4-litre engine and five-speed automatic. Include the actual body, engine and gearbox when requesting the fitting package.
Planted names the second-generation TSX under SB276 without separating saloon and Sport Wagon in that listing. Ask us to check the application for your particular car. Include any different original-market specification or changes to the floor connections.
The 2009 press kit describes powered front seats, driver memory and front seat heating. Write down the features you want to keep in the finished car. Check the exact replacement seat and its connections against that list. Garreth would make the comfort choice before settling on the upholstery.
Use the SB276 application to begin the lower assembly
The linked Planted bracket listing is for Acura TSX second generation, 2009 to 2014. Match the supplied reference to the exact car and physical seat position. Send photographs of the existing floor connections, especially if earlier adapters are fitted.
Build the quote around the seat, bracket, runner or fixed connection, any required side supports and the specified hardware. Check the contents of each part before adding more components. For a two-seat conversion, count the lower fittings separately for each position.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Keep the physical side and runner pattern on the same parts list
Planted uses SB276DR for physical left and SB276PA for physical right. Its driver and passenger wording follows its usual US left-hand-drive basis. Our shop options use RHD seating-side labels. Match the complete code to the actual steering arrangement and physical position.
The current shop selection identifies the side. Confirm Standard or Alternate separately with the seat and runner references. Standard includes Planted’s RECARO runner pattern; Alternate exchanges that pattern for Cobra and Scheel-Mann. Wide Cobra runners use Alternate, while the narrow Cobra pattern is included on both versions.
| Physical position | Standard pattern | Alternate pattern |
|---|---|---|
| Left | SB276DR | COBRA-SB276DR |
| Right | SB276PA | COBRA-SB276PA |
Planted asks for checks on RHD and other international applications beyond its usual US development basis. It also notes floor differences on some Canadian Acura and Honda models. Include the original market and floor photographs when asking us to compare your car.
Compare reclining seats for the journeys you do
The Sparco R100 in cloth, Corbeau Sportline RRS and Cobra Misano Anniversary are reclining candidates to try. Adjust the backrest and compare the cushion support with the driver. Check access to the recline control beside the door and centre console.
The linked RRS offer contains two seats. Include the required brackets and lower components for both positions if you want to fit the pair. Garreth would choose the support and adjustment first, with the finish following that decision.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,649.00 Incl. VATFrom £1,374.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Try fixed-back support with the controls in reach
Compare the Cobra Monaco Pro, Sparco Sprint and OMP TRS-E Velour for a fixed-back build. Sit in each candidate and check the cushion depth and bolster support. Use the instructions for the exact seat version to specify its mounting arrangement.
In a manual TSX, try full clutch-pedal travel as well as gear-lever reach. For an automatic, check the driving position through the control movements you use. Cameron would include the complete lower assembly in that trial. Check headroom with the driver and any headwear intended for the car.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £244.40 Incl. VATFrom £203.67 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Match the Cobra runner version to both connections
Discuss the linked Cobra runner with the chosen Cobra seat and supplied SB276 pattern. Keep the exact runner version on the quote, including its handle and hardware. Compare the fixing details at the seat and bracket connections.
Try the fore-and-aft adjustment with each person who drives the car. Both tracks need room to travel and lock across the intended range.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Check the Sparco sliding kit as part of the assembly
The linked Sparco sliding kit is another component to compare with the selected seat and Planted bracket. Use the current references and drawings at both interfaces. Include any required supports, spacers and fixings in the same parts list.
Cameron would check the sitting height with the complete runner arrangement fitted. Trial the actual driver in the car before confirming the position.
Choose the supports specified for the seat version
The linked Sparco steel side supports are a candidate for an appropriate Sparco side-mounted assembly. Match the support spacing and fixing details to the seat instructions and lower connection. A base-mounted seat uses the connection specified for that version. Confirm the complete arrangement before adding a separate support set.
Trial the floor bracket and full driving position
Use Planted’s installation instructions for the bottom-mounted or side-mounted arrangement you have specified. Its instructions distinguish sliding and fixed assemblies. Check the bracket against the actual floor connections before completing the upper assembly.
Try the finished position beside the door and centre console through the movement you need. Include gear-lever access and the buckle arrangement in the trial. Check the rear space you want to retain. Follow the current component instructions when specifying hardware and final tightening.
- Identify the model year, body style, engine, gearbox and original market.
- Confirm the physical side and complete SB276 reference.
- Match the supplied runner pattern and upper components.
- Trial driver reach, adjustment and cabin clearance together.
Plan the belt arrangement with the seat
Tell us whether the build will retain the car’s belt arrangement or use harnesses for a particular purpose. Show the existing buckle and its connection with the proposed seat details. Check the belt route and access in the finished position.
For a harness enquiry, include the exact seat, intended use and proposed attachment arrangement. We can then discuss the harness type and fittings for that installation.
Send the body and floor details with your shortlist
Include the model year, body style, engine, gearbox and original market, along with the chassis details. Photograph the floor connections and current seats. Tell us which physical position you are changing and where the steering wheel is fitted.
Add the full references of any seat, runner or adapter you already own. List the comfort features and adjustment you want to keep. Cameron would compare that information with the supplied parts. We can then prepare a seat and fitting-package quote for your TSX.
Common questions
Planted names the second-generation Acura TSX, 2009 to 2014. Send the actual model year, body style and original market to check the supplied bracket against your car.
Include the model year, engine, gearbox and floor photographs. Acura introduced the Sport Wagon for the 2011 model year. Ask us to confirm the application for that body before specifying the assembly.
Include the gearbox and trial full clutch-pedal travel with the completed seat position. Check gear-lever reach, steering position and access to the other controls.
Use the application named for the actual generation and model year. Planted lists the first-generation TSX separately under SB178. Confirm SB276 for the particular second-generation car.
Planted lists Honda Accord 2008 to 2012 separately under SB133. Send the exact model, body and original market for an application check before choosing between the bracket families.
Send the chassis details, original market and floor photographs with the enquiry. Ask us to check the actual application and supplied bracket for that car.
Planted uses SB276DR for physical left and SB276PA for physical right. Match those references to the steering arrangement and the shop’s seating-side labels.
Send the complete seat and runner references with the bracket enquiry. Confirm Standard or Alternate separately from the shop’s side selection. Planted distinguishes the two patterns for the upper connections.
Check the specification and connections of the exact replacement seat when requesting the package; SB276 identifies the vehicle bracket.
The cards show the Sparco R100 in cloth, Corbeau Sportline RRS and Cobra Misano Anniversary. Compare the chosen version with the complete fitting assembly proposed for your TSX.
The linked offer contains two seats, so count the brackets and other lower components separately for each position you are fitting.
Follow the mounting instructions for the exact seat version to specify its side supports, base connection or other required arrangement.
Measure the actual seat and complete lower assembly in the car with the driver, including its runner or fixed connection and any supports.
Send the exact seat, intended use and proposed attachment arrangement first. Confirm the mounting points for that installation. We can then discuss the harness type and fittings.
Garreth’s top tip
Garreth would try the seat for the journeys the TSX will actually do. Compare the support and entry with the driver, then check the adjustment you want. Keep that choice beside the complete fitting quote.
Cameron’s fitting view
Cameron would keep the body style, model year and original market with the SB276 reference. Match the physical side and supplied runner pattern before choosing the upper parts. Trial the complete driving position and control access together.
Plan your Acura TSX 2009 to 2014 seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Sources: Acura’s 2009 TSX press kit and 2011 Sport Wagon introduction; Planted’s SB276 application, pattern and market guidance and assembly instructions; linked shop listings. Confirm the exact car and supplied component versions when completing the package.

![Planted Technology Acura TSX [2nd Generation] (2009-2014) Seat Bracket](https://www.sportseats4u.co.uk/wp-content/uploads/sites/2/2026/08/SB276PA-1-300x300.jpg)





