Acura TL 1996 to 1998 Bucket Seat and Fitting Guide
A seat change for your early TL
Changing the front seats in a 1996 to 1998 Acura TL? We would start with how you want the car to feel on a longer journey. Garreth would put a reclining seat on the shortlist for a comfort-led build, then compare a fixed bucket if you want firmer support. Try both before choosing the trim.
Cameron would begin underneath the seat, with the exact TL version and the mounting arrangement already in your car. We list a Planted SB205 bracket for this period. This guide explains the side references, runner choices and seat options to discuss as a complete package.
At a glance
- Vehicle application: Acura TL, 1996 to 1998; identify the 2.5TL or 3.2TL and original market.
- Fitting bracket: Planted SB205, with separate left and right references.
- Runner pattern: select Standard or Alternate with the complete seat and runner references.
- Seat choices: compare reclining adjustment with the support and entry of a fixed bucket.
- Harnesses: specify the seat, intended use and mounting arrangement together.
- A 1998 registration can also belong to the later 1999-model TL; confirm the actual model before ordering.
Identify the 2.5TL or 3.2TL before choosing the fittings
The early TL is a four-door saloon offered as the five-cylinder 2.5TL and V6 3.2TL. Acura described the 1998 car around touring comfort, with a different character for each version. That makes the way you use your own car a useful starting point for the seat choice.
Keep the exact engine version on the fitting enquiry. Honda documents structural differences between the 2.5TL and 3.2TL despite their similar appearance. Photograph the current seats and floor connections, including any earlier adapters or repairs. Cameron would compare those details with the proposed bracket before specifying the upper fittings.
Start the fitting package with the Planted SB205 bracket
Our linked Planted listing names Acura TL 1996 to 1998 and uses the SB205 family reference. Planted’s application guide lists SB205DR for physical left and SB205PA for physical right. Keep the complete supplied code beside the position you want to change.
The bracket provides the vehicle-specific lower connection for a proposed aftermarket seat assembly. Select the seat, sliding or fixed connection, any side supports and the necessary hardware together. Our current shop options select the seating side, so ask us to confirm Standard or Alternate with the supplied package. Count the parts separately for each front seat you are changing.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Use physical left and right alongside the shop's side labels
Planted develops its normal applications around US left-hand-drive cars. Its driver/left wording identifies the physical left bracket, while passenger/right identifies physical right. Our shop uses RHD driver and passenger option labels, so include your actual steering arrangement when choosing a variation. The table below keeps the maker references with their physical positions.
Planted asks for confirmation on other markets and notes that some Canadian Acura and Honda floors differ. For a Japanese-market Inspire or Saber, send the chassis details and floor photographs for a separate application check. Match the supplied bracket to the actual mounting points before completing the order.
| Physical position | Standard reference | Alternate reference |
|---|---|---|
| Left | SB205DR | COBRA-SB205DR |
| Right | SB205PA | COBRA-SB205PA |
Choose the bracket pattern with the exact runner
Planted offers Standard and Alternate slider patterns for the SB205 application. Standard includes its RECARO slider pattern; Alternate exchanges that pattern for Cobra and Scheel-Mann. The maker directs wide Cobra runners to Alternate, while its narrow Cobra runner pattern is present on both versions. Ask us to confirm the supplied pattern with the full seat and runner references.
Check both connections of the runner assembly. Its upper fixings must match the seat or side supports, and its lower fixings must match the selected bracket. Include the handle, spacers and required hardware on that same list.
Compare fixed buckets for support and access
The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E Velour are fixed-back candidates to compare. Sit in the actual version and check where the cushion and bolsters support you. Include how often you get in and out, as well as the position you want behind the wheel. Each seat needs its mounting route and cabin clearance checked with the TL package.
Garreth would choose the seat that supports the driver comfortably before choosing the upholstery. Trial its complete position with the proposed lower fittings so you can judge the backrest angle and height in the car.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £244.40 Incl. VATFrom £203.67 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Keep backrest adjustment in the comparison
For a TL used on longer journeys, compare the Sparco R100 in cloth, Corbeau Sportline RRS and Cobra Misano Anniversary. Try their backrest and cushion support with the driver who will use the car. Leave room to reach and operate the adjustment controls.
A reclining backrest lets you alter the angle separately from fore-and-aft runner movement. Check the full seat movement beside the door and centre console, including buckle access and the space you want to keep behind it. Cameron would measure that assembly with the selected runner underneath it.
The linked RRS offer contains two seats, so count the brackets and runner assemblies for each position. Confirm the exact seat version and its base connection before the bracket pattern is chosen.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,649.00 Incl. VATFrom £1,374.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Match a Cobra runner to the supplied SB205 pattern
The linked Cobra runner is a starting point for a Cobra seat enquiry. Confirm its supplied version, width and fixing pattern with the seat reference. Planted’s narrow and wide runner guidance makes that detail relevant to the bracket choice.
Check the fore-and-aft travel with the actual driver and seat in position, including access to the release handle. Both tracks need room to move and lock through the range you will use.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Check both interfaces of the Sparco runner assembly
Compare the linked Sparco runner set with the chosen seat-side connection and the supplied Planted pattern. Confirm any spacers, supports and fixings required by that combination.
Try pedal reach, steering-wheel position and headroom with the driver in the car. Include the headwear you actually intend to use. We would measure the complete assembly before making a height recommendation.
Add side supports when the chosen seat needs them
A side-mounted shell needs supports matched to that exact seat and the lower assembly. The linked Sparco supports are a candidate for an appropriate Sparco combination. Check the seat’s mounting instructions, support spacing and runner connection together. For a base-mounted seat, confirm its specified base connection with its own instructions.
Plan the fitting from the floor up
Planted separates its instructions into bottom-mounted and side-mounted arrangements, each with sliding or fixed choices. Use the instructions for the combination you are actually fitting. A fixed arrangement needs its own pattern and position checked before the parts are prepared.
Trial the floor bracket first, then the complete seat assembly. Check clearance through the movement you need, including the backrest controls and buckle access. Final tightening and hardware selection belong with the current component instructions and the actual installation.
- Identify the exact TL, original market, steering side and physical seating position.
- Match the supplied bracket code and runner pattern to the proposed upper components.
- Check every fixing interface, quantities, supports and hardware before assembly.
- Trial the driving position, seat movement and cabin clearance with the driver.
Choose the belt arrangement with the complete seat installation
Tell us whether you want to retain the car’s belt arrangement or specify harnesses for a particular use. Include the exact seat, buckle and proposed mounting points in that enquiry. Check the route and access around the seat with the assembly in position.
We would choose the harness type and fittings after confirming the seat and intended use. Confirm its attachment points as part of the complete TL installation.
Send the details that let us specify one complete package
Include the model year, 2.5TL or 3.2TL version, chassis details, original market and steering side. Add photographs of the current seats and floor connections, including any existing adapters. Tell us which physical front-seat position you are changing. Send the seat and runner references you already have.
Describe the support and adjustment you want, and who drives the car. Garreth would use that to narrow the seat shortlist. Cameron would then match the proposed parts and trial position to the actual TL.
Common questions
The Planted SB205 listing names Acura TL 1996 to 1998. Include the exact model year, 2.5TL or 3.2TL version and original market when asking for a fitting package.
Check the model year and chassis details as well. Honda announced the new 1999-model TL for sale during September 1998. Planted gives the 1999 to 2003 application a separate SB179 reference.
Send the chassis details, original market and floor photographs for an application check before selecting the TL bracket.
Planted identifies SB205DR as physical left and SB205PA as physical right. Match the complete supplied code to the actual steering arrangement and shop option.
Planted’s Standard pattern includes the RECARO slider pattern. Alternate exchanges that pattern for Cobra and Scheel-Mann. Confirm the required version with the exact runner reference.
Try a reclining seat if backrest adjustment and longer-journey comfort are priorities, then compare its complete fitted position with your other choices.
We can discuss the fixed buckets shown with an appropriate mounting arrangement. Check the actual seat version, driver support and cabin clearance. Specify its supports and lower fittings as one assembly.
Choose runners if fore-and-aft movement is part of your planned installation. A fixed position needs a separately confirmed connection and trial position.
Use the mounting instructions for the exact seat version to establish whether it takes a base connection, side supports or another specified arrangement.
Measure the complete seat, bracket, runner or fixed connection and supports in the car with the driver; the bracket reference alone does not establish the finished height.
Include the actual buckle, its connection and the selected seat in the fitting enquiry so the complete arrangement and access can be checked.
Send the intended use, exact seat and proposed mounting arrangement first. We can then discuss the harness type and the fittings for that installation. Confirm its attachment points as part of the complete package.
Garreth’s top tip
Garreth would try the reclining and fixed choices with the driver before choosing the finish. For a comfort-led TL, spend time checking the cushion and backrest position. Keep the seat you prefer with its complete fitting quote.
Cameron’s fitting view
Cameron would put the exact TL version, original market and physical seating position at the top of the parts list. Match the complete SB205 code and supplied pattern to the chosen upper fittings. Trial the finished position before signing off the installation.
Plan your Acura TL 1996 to 1998 seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Sources: Honda’s 1998 TL press kit; the 1999-model TL launch announcement; Planted’s application guide, runner-pattern and market guidance and assembly instructions; linked current shop listings. Confirm the actual car and supplied component versions when completing the package.







