Honda Civic 1984-1987 Bucket Seat Guide (Excluding Si)
Choose the SB240 route for the 1984-1987 three-door Civic, excluding Si
For the third-generation Civic three-door hatchback in the 1984 to 1987 application range, we list the Planted SB240 lower bracket. The manufacturer explicitly excludes the Si from this application. Confirm the original model and market before choosing the physical side and the seating parts above the bracket.
Garreth would compare the seat support and access you want before settling the trim. Cameron can then check the lower bracket, runner and seat connection against the car. Include the original model details even where the engine, badges or interior have been changed.
At a glance
- Application: third-generation Civic three-door hatchback 1984-1987, excluding Si, following Planted’s US left-hand-drive baseline; verify the exact model and market.
- The Si exclusion remains part of the SB240 application; a matching year or three-door body does not remove it.
- One handed SB240 bracket serves one front seat. A pair of seats needs two complete fitting assemblies.
- Physical left is SB240DR, listed in the shop as RHD Passenger Side. It is the driver position in a left-hand-drive car.
- Physical right is SB240PA, listed as RHD Driver Side. It is the passenger position in a left-hand-drive car.
- The current shop choice selects seating side. Confirm the supplied Standard or Alternate upper pattern separately.
- Plan the seat width, assembled height, sliding travel, belt fittings and rear-seat access before ordering.
Identify the original model before choosing the bracket
Planted lists SB240 for the Civic three-door hatchback from 1984 to 1987, excluding Si. Start with the original vehicle identity. Include the build information, original market and any changes to the seats or floor fittings with the enquiry.
Honda’s US model history starts this hatchback generation at the 1984 model year and the following generation at 1988. Its Japanese archive records the three-door from September 1983 to August 1987. These dates help identify the generation; they do not extend the bracket’s 1984-1987 application to every car registered during 1983.
Check a Japanese car registered late in 1987 against its build information: Honda’s archive starts the following three-door generation in September that year.
The maker’s US left-hand-drive baseline also matters for an import or right-hand-drive car. Have the actual mounting arrangement checked for the original market. The three-door hatchback application does not establish a saloon, wagon or CR-X fitment.
An Si needs its own confirmed fitting recommendation. Supply the original chassis and model details if badges or an engine swap make identification unclear. For the preceding hatchback, see our separate 1980-1983 Civic seat guide.
Start with the correct handed SB240 lower bracket
The SB240 connects the original vehicle floor mountings to an aftermarket seat assembly. It is a fixed lower bracket. A separate matched runner provides sliding adjustment. Plan that connection before choosing the upper mounting parts.
One bracket covers one front seating position, so order a left and a right for a two-seat conversion. The seat and its upper fittings are separate choices. Have the quotation show the complete assembly for each position.
The current shop variations are SB240DR under RHD Passenger Side and SB240PA under RHD Driver Side. Planted calls those physical positions Driver / Left and Passenger / Right against its left-hand-drive baseline.
For a US left-hand-drive Civic in the stated non-Si application, SB240DR is the left driver position and SB240PA the right passenger position. Put the physical side beside the supplied reference on the order. For an import, have the vehicle application checked as well as translating the side label.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Match the physical side and the upper bolt pattern
Left and right describe the actual seating position. Driver and passenger depend on the steering arrangement. Use both the physical side and full supplier code to keep the order clear.
Planted offers Standard and Alternate versions of its upper slider pattern. Standard includes the RECARO slider connection; Alternate replaces that connection with the Cobra/Scheel-Mann pattern. The manufacturer’s narrow Cobra slider guidance covers both versions, while a wide Cobra slider needs the appropriate Alternate connection.
Our current SB240 form selects seating side without a separate Standard/Alternate choice. Have the actual supplied pattern confirmed with the runner specification. A Cobra seat choice does not itself select an Alternate lower bracket.
| Physical side | Planted reference | Current shop option | Position in a US LHD car |
|---|---|---|---|
| Left | SB240DR | RHD Passenger Side | Driver |
| Right | SB240PA | RHD Driver Side | Passenger |
Choose adjustment with both fixing interfaces checked
For an adjustable base-mounted seat, the usual order is vehicle bracket, runner and seat base. A side-mounted shell adds side supports between the runner and shell. Both connections to the runner must suit the proposed parts.
Sparco 0049306 is a runner-kit reference to discuss with a matching seat assembly. The shop lists a 345 mm by 271 mm mounting pattern. Check the fixing points beneath the runner against the actual SB240 version as well as the seat connection above it.
Cobra Premium runners offer 291 mm and 405 mm handle-width choices in our listing. Those labels do not describe the entire mounting drawing. Match the selected runner, seat and supplied Planted pattern together before ordering.
The Endurance universal runner is another option for a measured assembly. Its name does not establish the fixing spacing to your particular seat or lower bracket. Include the locking arrangement, operating space and usable travel in the check.
One runner kit serves one seat. Garreth would have the complete runner quantity written beside each adjustable position. Our sliding-runner guide explains the wider choices.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Specify a pair of supports for each side-mounted shell
A side-mounted bucket needs a support along each side of the shell. Sparco SS004902 supplies those two brackets as one set. That set serves one seat. A pair of side-mounted seats needs a set for each position.
Choose the supports against the seat’s mounting instructions and the connection underneath them. The available fixing holes affect the proposed height and angle. They do not establish door clearance or enough room for the belt buckle in an early Civic.
Planted’s own side-support instructions normally place sliders between its supports and the vehicle bracket. Have a fixed arrangement specified separately if adjustment is being omitted. Removing a runner from an existing assembly changes the connections that need checking.
Compare support, mounting route and cabin space
The Cobra Monaco Pro gives us a choice of base or side mounting. Its listed base pattern is 292 mm by 330 mm. Decide which route you want before choosing the runner or side supports.
The Corbeau Sprint X System 1 and OMP Champ-R use side mounting. Their side supports and lower connections need specifying with the actual shell. Include the shell’s shoulder width and the clearance at the door and transmission tunnel.
A seat that suits the occupant in the showroom still needs its position checked inside the car. Allow for a helmet where one is used and compare the resulting eye line and pedal reach. Keep enough space to operate the buckle and adjusters.
The seat’s approval and label apply to that seat, with permitted mountings and event requirements assessed separately. They do not certify an entire SB240 installation. Have the intended use included with the parts recommendation.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £690.00 Incl. VATFrom £575.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Check the base, controls and rear-seat access
Sparco R100 is a base-mounted recliner with a listed 345 mm by 271 mm pattern. The seat, lower vehicle bracket and any runner remain separate parts. Include room for its control and the original belt buckle when setting the position.
The Cobra Daytona listing has a required seat-base choice alongside its trim and side options. Have the correct base itemised for this assembly. A named special base in the options does not establish an early Civic floor connection.
The Corbeau RRS listing shown here supplies two seats. This is the standard-base specification. The handed vehicle brackets are separate. Match each seat’s actual base arrangement to the proposed runner and lower fittings.
These are three-door cars, so discuss rear-seat access before choosing a seat. A reclining function and a usable access movement are separate checks. Try the actual seat, controls and runner travel in the proposed installation to establish the access available.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £599.00 Incl. VATFrom £499.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Plan the three-point Clubman around the actual restraint fittings
TRS 21A300 is the three-point bolt-in Clubman listing. Its bolted ends need suitable anchorage and routing in the actual car. The point count does not identify ready-made fixing positions in this Civic.
Have the restraint specified with the seat, occupant and intended use. Keep the original belt and buckle arrangement in the discussion for a road car. A lower seat bracket is not evidence of a suitable belt anchorage.
This Clubman example is separate from an FIA competition-harness recommendation and does not provide a HANS system. Ask for an appropriate restraint specification when the build is intended for an event.
-
From £96.00 Incl. VATFrom £80.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
Check the four-point clip-in hardware and routing
TRS 21B400 is the four-point clip-in Clubman listing. Its snap hooks require the correct compatible anchorage hardware. Have the complete arrangement checked against the seat and the vehicle before selecting it.
A four-point name does not establish a supplied crotch strap, an approved location for one or suitable belt angles. Follow the actual harness specification and installation instructions. The required anchorage and intended use determine whether the arrangement is appropriate.
For a competition build, specify the event and the proposed seat with the enquiry. That lets the restraint and mounting requirements be considered together.
-
From £120.00 Incl. VATFrom £100.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
List the whole installation before ordering
Start with the car’s body, market and physical seating side. Add the actual SB240 version and runner where adjustment is required, followed by the seat’s base connection or side supports. List the fasteners and restraint fittings separately.
Count each front position independently. Two seats need two handed vehicle brackets and two runner kits if both seats are adjustable. A side-bracket pair supports one shell, while the RRS seat pair supplies two seats.
Photographs of the original mountings help identify repairs, spacers or parts left from a previous conversion. Include the belt buckle attachment and any equipment connected to the existing seat in the assessment. Have the installer establish which original functions and fittings need retaining.
| Part of the job | Specify | Check with the actual car |
|---|---|---|
| Vehicle bracket | One SB240DR left or SB240PA right per seat | Body, original market, supplied code and upper pattern |
| Sliding adjustment | One matched runner kit per adjustable position | Both mounting interfaces, locking and usable travel |
| Seat connection | Base fixing or a pair of side supports | Seat instructions, dimensions, height and angle |
| Two-seat order | Two complete fitting assemblies | Left/right controls, buckle space and rear access |
| Structure and restraints | Sound mountings and suitable fixing hardware | Previous repairs, belt attachments and intended use |
Inspect the floor and try the complete driving position
Have the carpet lifted around the original seat mountings so their condition can be inspected. Corrosion, damaged threads and previous repairs need resolving before a new seat assembly is fitted. A bracket relies on the structure it is attached to.
Trial the complete arrangement with the actual occupant. Check the steering wheel, pedals and head clearance, then operate the runner through its full travel. Close the door and check the controls and buckle remain usable.
Check both front positions when fitting a pair. Include the rear-seat access you need and any helmet or restraint equipment used in the car. Nominal seat dimensions alone cannot establish the finished position.
Follow the instructions for the supplied parts and have the complete assembly fitted and checked by someone competent in this work. Send the car and seat details through our contact page or chat for help putting the parts list together.
Common questions
Which Civic is this guide for?
The third-generation three-door hatchback in Planted's 1984-1987 SB240 application, explicitly excluding Si. Other markets and right-hand-drive applications need checking against the maker's US left-hand-drive baseline.
Do registration years establish the SB240 application?
Honda's Japanese archive records this three-door generation from September 1983 to August 1987, with the next generation starting that September. Planted states 1984-1987 and excludes Si. Have the actual build, original model and market identified before choosing a bracket.
Does SB240 cover the Civic Si?
Planted explicitly excludes the Si from this application. Send the original chassis and model details for a separate fitting recommendation, even if the car has been rebadged or had an engine change.
Can I use it on a saloon, wagon or CR-X?
The SB240 application names the three-door Civic hatchback; confirm another body separately before choosing its lower fittings.
Which SB240 is physical left?
SB240DR is physical left. The shop calls this RHD Passenger Side; it is the driver position in the US left-hand-drive baseline.
Which SB240 is physical right?
SB240PA is physical right. The shop calls this RHD Driver Side; it is the passenger position in a US left-hand-drive car.
How many brackets do I need for two seats?
Use one correctly handed vehicle bracket per seat, with the remaining fittings specified independently for both positions.
Does the SB240 include sliding adjustment?
The SB240 is a fixed lower bracket, with a separate matched runner needed for fore-and-aft adjustment.
What changes between Standard and Alternate?
The maker's Alternate version replaces its Standard RECARO slider connection with the Cobra/Scheel-Mann pattern. Confirm the supplied version separately from the shop's seating-side choice.
Which Cobra Premium runner width should I select?
The listing has 291 mm and 405 mm handle-width choices. Compare the full runner drawing, the seat and Planted's narrow/wide guidance against the actual bracket pattern.
Does a universal runner fit without further measurements?
Check the connection to both the lower bracket and the seat or side supports, because a universal description does not establish either interface.
Can the Monaco Pro be base mounted?
The Monaco Pro permits base and side mounting, with a listed 292 mm by 330 mm base pattern; specify the chosen route and matching fittings.
Do the Sprint X and Champ-R need side brackets?
Both use side mounting, so have the supports and connections beneath them checked for the actual shell and proposed position.
Does one SS004902 set support two seats?
One SS004902 set supplies the two side brackets for one seat; two side-mounted shells need two sets.
Will a recliner preserve access to the back seats?
Check the actual seat movement and installed runner travel. A reclining backrest does not by itself establish usable rear-seat access in a three-door car.
Are vehicle frames included with the RRS pair?
The RRS listing supplies two standard-base seats, with the handed vehicle frames and other mounting parts ordered separately.
Does choosing a Daytona trim also choose its base?
The Daytona has a required seat-base choice, so have the correct base, side and trim configuration itemised for your installation.
Why check beneath the carpet before fitting?
The original mounting areas need sound surrounding structure and usable fixings. Identify corrosion, repairs and previous conversion parts before the new assembly is installed.
Does a four-point Clubman include a HANS system or crotch strap?
Do not infer those features from a four-point name. Use the actual restraint specification and instructions to establish supplied parts, anchorage and intended use.
What should I send with a fitting enquiry?
Send the build, original model and market, steering arrangement, physical side, exact seat and intended use. Include chassis details where the Si identity is unclear, plus photographs of the floor fittings and belt buckle.
Garreth's top tip
I would choose the seat by trying the support and getting in and out, then price one complete fitting assembly alongside it. In a three-door Civic, think about whether anyone still needs the back seats. A reclining backrest alone does not tell us how much access the finished installation will leave.
For two seats, ask for the left and right brackets and the runner quantities to be written out. The RRS listing is a pair of seats, while the brackets and runner sets cover individual positions. That distinction makes the order much easier to check.
Cameron's fitting view
I would look under the carpet before deciding the floor is ready for a seat change. The fixing points need sound surrounding structure, and any repairs or previous conversion brackets need identifying. Match the actual supplied SB240 code and physical side to that car.
Then check the seat position with the occupant in place. Include the door, steering wheel, pedals, belt buckle and the full adjustment range. Have the seat, runner and support instructions together so the complete assembly can be checked before use.
Plan your Honda Civic three-door hatchback 1984-1987 excluding Si seat change
Drop us an email or open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Application references: Planted’s vehicle application guide, Planted’s fitting FAQs and installation instructions. Honda’s US model history and Japanese Civic archive distinguish model years from introduction dates. Match the actual car and the Si exclusion to the bracket application.

![Planted Technology Honda Civic 3 Door Hatch Back [Excluding Si] (1984-1987) Seat Bracket](https://www.sportseats4u.co.uk/wp-content/uploads/sites/2/2026/08/SB240DR-2-300x300.jpg)







