Dodge Viper Fourth Generation (2008-2010) Bucket Seat and Fitting Guide
Choose seats and fitting parts for your fourth-generation Viper
Planted’s SB163 listing is the lower bracket starting point for the fourth-generation Dodge Viper within its shared third/fourth-generation 2003-2010 application. This guide focuses on the 2008-2010 cars and the actual equipment being changed.
Garreth would choose the seat around the driver’s road and track use. Try a fixed bucket alongside a recliner, including getting in and out of the car. We can quote the preferred seat with the adjustment and fitting parts it needs.
Cameron starts with photographs of the current seat, floor attachments and buckle arrangement. Include the exact body and trim, especially on an ACR or previously modified car. Confirm the full SB163 side reference and supplied runner pattern before ordering.
At a glance
- Guide focus: fourth-generation Viper, 2008-2010 cars.
- Listed lower family: SB163, shared in Planted’s title with the third generation for 2003-2010.
- Physical left: SB163DR Standard or COBRA-SB163DR Alternate.
- Physical right: SB163PA Standard or COBRA-SB163PA Alternate.
- Specify the supplied runner pattern separately from the shop’s physical-position selection.
- Include the actual buckle attachment and travel, roof arrangement and any previous seat conversion.
Confirm the generation and the car you are changing
Dodge’s original 2008 feature and specification document covers roadster and coupe versions of the SRT10. Identify the actual body, model year and chassis details with its original market and steering arrangement. Send the full trim and present seat specification, including any previous conversion.
The SB163 bracket title spans the third and fourth generations for 2003-2010. This guide focuses on the fourth-generation cars. A reference to that shared range does not make the exact roof, seat or restraint arrangement interchangeable.
Specify the complete assembly above the SB163 bracket
The linked SB163 listing has RHD Driver Side and RHD Passenger Side options. Specify the actual physical side and full reference for the car, then confirm the supplied runner pattern. Have the quotation itemise the floor bracket, runners, any supports and the hardware required for the chosen seat.
Each position needs its own confirmed assembly when changing both seats.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Match the physical side to the full manufacturer code
Planted names SB163DR Driver / Left and SB163PA Passenger / Right. The shop uses RHD position labels, so an LHD driver needs physical left from the SB163DR family, corresponding to its RHD Passenger Side choice. Confirm the actual supplied part and the car’s mounting arrangement.
Cameron would put the physical side beside each full reference on the quotation. Add the actual steering arrangement and any conversion details. Specify each seat position separately.
| Physical side | Standard | Alternate | Position to confirm |
|---|---|---|---|
| Left | SB163DR | COBRA-SB163DR | RHD passenger / LHD driver |
| Right | SB163PA | COBRA-SB163PA | RHD driver / LHD passenger |
Choose the supplied pattern with the runner
Specify the supplied Standard or Alternate pattern with the exact runner. Standard includes the Recaro slider layout; Alternate substitutes Cobra / Scheel-Mann for it. Selecting a physical side in the shop does not independently select an Alternate bracket. Confirm the lower runner-to-SB163 fixings and the upper connection to the seat or supports before ordering.
Compare fixed buckets with the driver and door opening
Compare the Cobra Monaco Pro, Sparco Sprint and OMP TRS-E with the regular driver. Confirm the exact shell version and its permitted mounting method before choosing supports. Trial access through the actual door opening, then check shoulder and base clearance with the console and trim fitted. Include a helmet where the car will be used on track. Garreth would compare that support and entry space with a recliner before choosing the seat for a car that also covers road miles.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £244.40 Incl. VATFrom £203.67 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Try a recliner for a Viper used regularly on the road
The Sparco R100, Corbeau Sportline RRS and Cobra Misano Anniversary are reclining seats to try with the driver. Assess the cushion, backrest and usable adjustment, then confirm the exact base fixings. Check recline travel and access to the controls against the rear of the actual cabin.
The linked RRS product is a seat pair. Each position still needs its separately confirmed lower assembly.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,649.00 Incl. VATFrom £1,374.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Confirm the Cobra runner layout and handle access
The Cobra Premium runner kit has handle-type choices to specify with the exact seat. Check the full lower fixing layout against the supplied SB163. Planted distinguishes Narrow and Wide Cobra slider patterns, which cannot be identified from the handle description alone. Trial operation with the actual console and trim.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Plan the adjustment needed by the regular drivers
The Sparco sliding kit is another runner option to check with the selected seat. Match its lower fixings to the supplied bracket and its upper fixings to the seat or supports. Trial the travel needed by each regular driver and confirm that both runners lock correctly.
Include usable handle access when checking the finished position.
Choose supports around the exact side-mounted shell
For a side-mounted shell, assess the linked Sparco steel supports against its fixing geometry and permitted hardware. Confirm the support-to-runner or lower-bracket connection before choosing the final height and tilt. Include all those parts when measuring the seat in the car.
Leaving runners out calls for a separately specified attachment plan.
Trial roof clearance and driving reach through the required travel
Set the finished driving position with the actual roof arrangement in place and the door closed. Check pedal and steering-wheel reach, visibility and access to the gear lever. Trial head and shoulder clearance with the clothing and helmet used for the intended driving. Include the actual pedal adjustment equipment and the seat travel required by each driver.
The complete assembly needs measuring before a lowering amount can be agreed.
Assess buckle attachments and movement with the replacement seat
The original 2008 feature table describes travelling inboard seat-belt buckles. Record the actual buckle attachment on the car before removing its seat. Have the installer assess that arrangement and the belt path with the selected seat and runner throughout their required travel.
Include existing wiring, other seat-related equipment and any previous adapter in the fitting assessment.
Choose the restraint arrangement alongside the seat
Have the original belt and buckle arrangement assessed with the selected seat fitted. Agree how the existing attachments and belt path will work with the proposed assembly.
For a harness installation, identify the exact harness model and intended use first. Suitable vehicle anchors and routing need assessment under its instructions and the relevant event requirements. The shell’s belt openings are not vehicle anchors.
Trial the supplied lower bracket before building upwards
Confirm the full supplied code and trial the bare SB163 against the actual floor attachments. Assess any previous floor work or adapters before adding runners and the seat. Use the exact component instructions and their specified hardware.
Trial the completed driving position and adjustment with the buckle and belt arrangement included. Have the installer complete the agreed checks before the car is used.
Send the details needed for a complete Viper quotation
Clear mounting photographs and visible part labels help us specify the lower assembly. Include the seat you prefer and the parts proposed for reuse.
- Model year, chassis, original market and actual body and roof arrangement.
- Full trim, current seat specification and previous interior conversions.
- Steering arrangement and physical position to be changed.
- Floor, runner, buckle and wiring photographs with visible part references.
- Full SB163 code, supplied pattern and required adjustment.
- Preferred seat, driver requirements and intended road or track use.
Common questions
It focuses on fourth-generation 2008-2010 cars within Planted’s shared SB163 third/fourth-generation 2003-2010 application.
Planted’s SB163 application groups the two generations within 2003-2010. Confirm the exact car, physical side and supplied bracket against your installation.
Send the full trim and actual seat, floor and restraint details for assessment; the badge does not specify the parts or previous modifications present on the car.
State physical left and LHD beside the SB163DR family reference, then confirm the supplied part against the actual car.
SB163DR is Standard physical left; COBRA-SB163DR is the Alternate physical-left pattern.
SB163PA is Standard physical right; COBRA-SB163PA is the Alternate physical-right pattern.
Alternate substitutes Cobra / Scheel-Mann for the Standard Recaro slider pattern and must be specified separately from the physical side.
Confirm each position’s full lower assembly separately, including runners, supports and hardware for the exact seats.
The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E are linked options to compare with the driver, exact mounting method and cabin clearance.
Try the linked Sparco R100, Corbeau Sportline RRS pair and Cobra Misano Anniversary with the actual driver and usable adjustment space.
The linked product supplies two seats. Have the confirmed lower assembly for each position specified separately.
Send their exact references and photographs so the lower and upper fixing interfaces can be checked with the proposed installation.
Confirm the exact runner layout with the supplied SB163, because Planted distinguishes Narrow and Wide Cobra slider patterns separately from a handle description.
Check its lower bracket connection, upper seat or support connection, handle access and operation of both locking runners.
A shell using side fixings needs suitable supports with a confirmed connection to the selected runner or lower bracket.
Have a fixed installation specified separately; removing runners changes the attachment layout and does not establish fixing alignment.
Measure the complete assembly with the selected seat. There is no single lowering amount for every combination.
Dodge’s 2008 table describes travelling inboard buckles. Have the actual attachment and belt path assessed with the new seat throughout the required adjustment.
Have the actual belt attachments, buckle and routing assessed with the selected seat and the car’s original restraint equipment.
The exact harness needs suitable vehicle anchors and routing assessed under its instructions and intended use. Seat openings or a general provision do not specify that completed assembly.
Include full details and photographs so the installer can assess the actual equipment and attachments before the assembly is specified.
Send the chassis and model year, market, trim, body, roof and steering details, physical positions, mounting and equipment photographs, chosen seat and intended use.
Garreth’s top tip
I would start with the driver’s support and access needs, including the road miles the car covers. Try the seat with the clothing and helmet used for the planned driving. We can then match that choice to a complete fitting quotation.
Cameron’s fitting view
Record the actual buckle attachment and its movement before taking the original assembly apart. Include those details with the floor and runner photographs. Confirm each physical side on the full SB163 code and assess the finished seat and restraint arrangement together.
Plan your Dodge Viper fourth generation (2008-2010) seat change
Drop us an email or open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Application sources: Planted physical-left SB163 bracket, physical-right SB163 bracket, installation guidance and FAQs. Vehicle reference: Dodge’s original 2008 feature and specification document. Confirm the exact car and supplied fitting assembly.







