Dodge Viper Second Generation (1996-2002) Bucket Seat and Fitting Guide
Choose a seat and fitting assembly for your second-generation Viper
The Planted SB132 listing is the lower bracket starting point for a second-generation Dodge Viper within its named 1996-2002 application. Choose the physical side and supplied runner pattern with the actual car in mind.
Garreth would try the seat for getting in and out as well as support once sitting in it. Bring the driver into that choice and include the way the Viper is used. We can then quote the seat with the fitting parts it needs.
Cameron starts with the current seat, its floor attachments and any previous modifications. Record the full SB132 reference beside the physical side. The driver label on an imported car needs explaining before the parts are ordered.
At a glance
- Application: Planted’s named second-generation Viper bracket, 1996-2002.
- Listed floor bracket: SB132, with separate shop choices for both RHD positions.
- Physical left: SB132DR Standard or COBRA-SB132DR Alternate.
- Physical right: SB132PA Standard or COBRA-SB132PA Alternate.
- Confirm the runner pattern separately from the shop’s position selection.
- Trial access and the complete driving position with the actual roof and restraint arrangement.
Confirm the generation and the car you are changing
Use the car’s model-year and chassis details to confirm the application. Send its original market, body and roof arrangement, actual steering position and photographs of the existing seats. Include previous floor, runner or interior changes.
SB132 is the listed second-generation bracket. The later third/fourth-generation listing uses SB163 and needs a separate application check.
Specify the complete assembly above the SB132 bracket
The linked Planted listing has RHD Driver Side and RHD Passenger Side choices. Confirm the full physical-side reference against the car. Add the required runner and any supports for the chosen seat to the quotation.
Have the supplied pattern and hardware itemised with those parts.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Match the physical side to the full manufacturer code
Planted calls SB132DR Driver / Left and SB132PA Passenger / Right. The shop labels its choices by RHD position. For an LHD driver, specify physical left and the SB132DR family reference, which corresponds to the shop’s RHD Passenger Side choice. Confirm the supplied part against the actual car.
Cameron would write both the physical side and steering arrangement on the quotation. Include any conversion details with photographs of the floor. Treat the other seat as a separately specified position.
| Physical side | Standard | Alternate | Position to confirm |
|---|---|---|---|
| Left | SB132DR | COBRA-SB132DR | RHD passenger / LHD driver |
| Right | SB132PA | COBRA-SB132PA | RHD driver / LHD passenger |
Choose the supplied pattern with the runner
Planted’s Standard pattern includes Recaro slider fixings. Alternate substitutes Cobra / Scheel-Mann for that pattern. A shop seat-position selection does not independently choose an Alternate bracket. Specify the exact runner and check both its lower connection to SB132 and its upper connection to the seat or supports.
Compare fixed buckets with the driver and door opening
Start with the Cobra Monaco Pro, Sparco Sprint and OMP TRS-E as fixed-back seats to compare. Try the exact version and check its permitted mounting method before choosing supports. Garreth would include entry and exit in that trial, especially with a high lower bolster. Sit in the clothing used for driving and try the helmet used on track where relevant. Have the shell’s shoulder and base dimensions checked in the actual cabin.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £244.40 Incl. VATFrom £203.67 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Try a recliner for a Viper used regularly on the road
The Sparco R100, Corbeau Sportline RRS and Cobra Misano Anniversary are reclining alternatives to assess with the driver. Compare cushion support and adjustment, then check the exact base fixings. Trial backrest movement and usable access to the recline controls in the car.
The linked RRS listing is a pair of seats. Each position needs its own confirmed fitting assembly.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,649.00 Incl. VATFrom £1,374.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Confirm the Cobra runner layout and handle access
The Cobra Premium runner listing has handle-type choices. Give us the actual runner reference with the selected seat and lower bracket. Planted distinguishes Narrow and Wide Cobra slider patterns, so the handle description alone does not establish the fixing layout. Trial handle access with the console and trim fitted.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Plan the adjustment needed by the regular drivers
The Sparco sliding runner kit is another option to check as part of the assembly. Confirm its lower attachment to the supplied SB132 and its upper connection to the chosen seat or supports. Trial the travel required by the driver and check both locking runners together.
Keep the adjustment handle accessible through the required travel.
Choose supports around the exact side-mounted shell
For a seat with side fixings, the linked Sparco steel supports are an option to assess against the shell’s fixing geometry. Check the permitted hardware and the connection to the runner or lower bracket. Include the intended height and tilt in the completed trial.
An installation without runners needs its own attachment plan.
Trial the complete driving position with the roof in place
Check the complete assembly with the regular driver, including the pedals, steering wheel and gear lever. Trial visibility and head clearance with the car’s actual roof arrangement in place. Close the door and check the shell against the console and trim. Include access to the buckle and seat adjustment.
A bucket seat does not establish a fixed reduction in seating height.
Record the original seat and restraint attachments before removal
Photograph the existing lower assembly and record any component references proposed for reuse. Include the buckle attachment, belt path and any wiring or equipment associated with that seat. Have the installer assess the exact equipment before dismantling it.
A previous adapter or runner conversion belongs in the fitting assessment.
Choose the restraint arrangement alongside the seat
Have the original belt and buckle arrangement assessed with the selected seat fitted. Agree how the existing attachments and belt path will work with the proposed assembly.
For a harness installation, identify the exact harness model and intended use first. Suitable vehicle anchors and routing need assessment under its instructions and the relevant event requirements. The shell’s belt openings are not vehicle anchors.
Trial the supplied lower bracket before building upwards
Check the full supplied reference and trial the bare SB132 against the actual floor attachments. Include previous repairs or adapters in that check. Follow the instructions for the exact components and use their specified hardware.
Build the agreed assembly and trial adjustment, driving position and restraints before final tightening. Have the installer complete the agreed checks before the car is used.
Send the details needed for a complete Viper quotation
Clear mounting photographs and visible part labels help us specify the lower assembly. Include the seat you prefer and the parts proposed for reuse.
- Model year, chassis details, original market and exact body and roof arrangement.
- Actual steering configuration and physical seat position.
- Existing seat, floor attachments, repairs and previous adapters.
- Current belt, buckle and other seat-related equipment.
- Full SB132 side code, supplied pattern and required adjustment.
- Chosen seat, driver requirements and intended road or track use.
Common questions
It follows Planted’s named second-generation Dodge Viper application for 1996-2002, using the SB132 bracket family.
The linked second-generation listing uses SB132. Planted lists SB163 for the later third/fourth-generation 2003-2010 application.
Send the exact car and mounting details for assessment; the named application alone does not approve every complete installation.
Specify physical left and LHD beside the SB132DR family reference, then confirm the supplied part against the car.
SB132DR is Standard physical left, while COBRA-SB132DR is the Alternate physical-left pattern.
SB132PA is Standard physical right, while COBRA-SB132PA is the Alternate physical-right pattern.
Alternate substitutes Cobra / Scheel-Mann for the Standard Recaro slider pattern and needs specifying separately from the physical side.
Have the floor-to-seat assembly confirmed separately for each position, with its runners, supports and hardware included in the quotation.
The linked Cobra Monaco Pro, Sparco Sprint and OMP TRS-E are options to try with the driver, exact mounting method and available cabin space.
The guide links the Sparco R100, Corbeau Sportline RRS pair and Cobra Misano Anniversary for comparison with the driver and actual car.
The linked product is a pair of seats. Specify the confirmed lower assembly for each position separately.
Send its exact reference and photographs so both fixing interfaces can be checked against the proposed assembly.
Check the exact runner and supplied pattern together, because Planted distinguishes Narrow and Wide Cobra slider layouts.
Confirm its lower bracket connection, upper seat or support connection, handle access and operation of both locking runners.
A shell with side fixings needs suitable supports and a confirmed connection to the selected runner or lower bracket.
Have a fixed installation specified separately, since removing the runners changes the attachment layout and does not establish fixing alignment.
Measure the complete assembly with the chosen seat. The bracket listing does not establish one lowering amount for every combination.
Include the actual roof arrangement when checking head clearance and the driving position, with the helmet used on track where relevant.
Have the actual attachments, buckle and belt path assessed with the selected seat and the car’s original restraint equipment.
The exact harness needs suitable vehicle anchors and routing assessed for its intended use. Seat openings do not provide those anchors.
Include their details and photographs so the installer can assess the actual floor attachments before specifying the new assembly.
Send the year, chassis, market, body, roof and steering details, physical seat position, mounting photographs, existing seat and restraints, preferred seat and intended use.
Garreth’s top tip
I would choose a seat after trying entry and exit as well as its support. Include how often the Viper goes on the road and the driver’s clothing or track equipment. We can work through that preferred seat and its complete fitting kit together.
Cameron’s fitting view
Photograph the original lower assembly before it comes apart. Put the physical side beside the full SB132 reference and confirm the runner pattern. Trial the completed position with the roof, console and adjustment equipment in place.
Plan your Dodge Viper second generation (1996-2002) seat change
Drop us an email or open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Application sources: Planted physical-left second-generation Viper bracket, physical-right bracket, installation guidance and FAQs. Confirm the exact car and supplied assembly.







