Dodge Ram First Generation (1981-1993) Bucket Seat and Fitting Guide
Choose seats and a fitting kit for your first-generation Ram
Planted SB262 is the listed lower bracket route for the first-generation Dodge Ram within its named 1981-1993 application. Confirm the actual truck and physical side before choosing the seat and upper fittings.
Garreth would try a supportive recliner alongside a fixed bucket with the driver. Include the way the Ram is used and how you get into the cab. We can then quote the preferred seat and fitting parts together.
Cameron starts with photographs of the existing bench or individual seats and their floor attachments. Specify the physical side with the full bracket code. A two-seat conversion needs both lower assemblies considered together.
At a glance
- Scope: Planted’s named first-generation Ram application, 1981-1993.
- Listed lower route: SB262, with separate shop choices for both RHD seat positions.
- Physical left: SB262DR Standard or COBRA-SB262DR Alternate.
- Physical right: SB262PA Standard or COBRA-SB262PA Alternate.
- Specify the supplied runner pattern separately from the seat-position label.
- Include the actual cab, original bench or seats, any retained centre position and restraint assessment.
Identify the truck and its present seating arrangement
This guide follows Planted’s named first-generation Dodge Ram application for 1981-1993. Send the chassis and model-year details with the original market, cab configuration and actual steering arrangement. Include the drive configuration and any previous interior conversion.
Photograph the existing bench or individual seats, their floor attachments and the buckle arrangement before deciding what can be retained.
Use SB262 as the listed lower fitting route
The linked Planted SB262 listing provides separate RHD Driver Side and RHD Passenger Side choices. Confirm the physical side and full supplied reference against your truck. Specify the runner pattern before choosing the seat and any supports above the bracket.
Have the quotation list the complete floor-to-seat assembly, including its hardware.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Put the physical side beside the full bracket code
Planted names SB262DR as physical left and SB262PA as physical right. Its Driver / Left and Passenger / Right labels follow that physical arrangement. The shop uses RHD seat-position labels. An LHD driver therefore needs physical left, corresponding to the shop’s RHD Passenger Side choice, with the actual supplied part confirmed.
Cameron would write the physical side beside the full reference on the quotation. Include the actual steering arrangement, especially on an imported or converted truck. Specify each position separately when changing two seats.
| Physical side | Standard | Alternate | Position to confirm |
|---|---|---|---|
| Left | SB262DR | COBRA-SB262DR | RHD passenger / LHD driver |
| Right | SB262PA | COBRA-SB262PA | RHD driver / LHD passenger |
Choose the supplied pattern with the exact runner
Planted offers Standard and Alternate bolt-pattern versions. Standard includes the Recaro slider pattern; Alternate replaces that pattern with Cobra / Scheel-Mann. Choosing a physical position in the shop does not independently select an Alternate bracket. Have the runner’s lower fixings checked against the supplied SB262 and its upper fixings checked against the seat or supports. Put those exact references on the quote.
Compare fixed buckets with cab access and driver fit in mind
The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E are fixed-back seats to try with the driver. Choose the exact version and its permitted mounting method before settling the upper fitting parts. Trial entry and exit through the truck’s actual door opening. Check the lower bolsters with the clothing used for driving, then assess shoulder support and access to the buckle. Include the helmet used on track where relevant. Garreth would compare that support and entry space with a recliner before choosing a seat for regular road use.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £244.40 Incl. VATFrom £203.67 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Try recliners for a Ram used on the road
The Sparco R100, Corbeau Sportline RRS and Cobra Misano Anniversary offer reclining alternatives to assess. Compare cushion support and adjustment with the regular driver. Check the exact seat’s base fittings and leave usable space for the recline controls. Trial backrest movement against the cab wall or any rear seating and storage actually present.
The linked RRS product is a pair of seats. Each position still needs its own confirmed lower fitting assembly.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,649.00 Incl. VATFrom £1,374.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Confirm the Cobra runner version and handle clearance
The Cobra Premium runners have different handle-type choices. Specify the actual runner reference with the seat and lower bracket. Planted distinguishes Narrow and Wide Cobra slider patterns, so a handle-width description alone does not identify the full fixing layout. Trial handle access with the cab trim and any centre seating or console in place.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Include the required adjustment in the fitting plan
The Sparco sliding runner kit is another option to check with the chosen seat. Confirm its lower attachment to SB262 and its upper connection to the seat or supports. Trial the travel needed by the driver with both runners locking correctly and the handle accessible.
Measure the finished position with all agreed components fitted.
Add appropriate supports for a side-mounted shell
The linked Sparco steel side mounts are an option to assess for a shell using side fixings. Match the exact shell’s fixing geometry and permitted hardware, then confirm the connection to the runner or lower bracket. Include the intended height and tilt in the trial.
A fixed installation without runners needs a separately specified attachment plan.
Trial reach, clearance and movement in the actual cab
Set the position with the regular driver in the complete assembly. Check the steering wheel, pedal reach and visibility with the seat at the travel positions you need. Include the gear lever and any transfer-case controls actually fitted. Trial the closed door and check access to the adjustment and restraint equipment.
No fixed lowering amount follows from choosing SB262.
Plan a bench-to-seat conversion as a complete installation
If the truck currently has a bench, have the actual floor attachments compared with the proposed individual-seat installation. Include both lower assemblies when changing two positions. Give the installer details of any centre position you intend to retain and its restraint equipment.
Photograph buckle attachments and any wiring before removal. A pair of seat brackets does not by itself specify a retained centre seat or its belt arrangement.
Assess the restraint arrangement alongside the seat
Have the original belt attachments, buckle position and belt path assessed with the selected seat fitted. Agree the completed checks for the exact equipment on the truck before dismantling it.
For a harness, specify the exact model and intended use before choosing attachments. Routing and suitable vehicle anchors need assessment with the seat under the relevant instructions and event requirements. Openings in the shell do not provide those anchors.
Start with a trial of the bare lower bracket
Check the supplied full reference and trial the bare SB262 against the actual floor attachments. Include any repairs, previous adapters or differences from the reference application before adding runners and the seat. Use the exact component instructions and specified hardware.
Trial the completed driving position, adjustment and restraint arrangement before final tightening. Have the installer complete the agreed checks before the truck is used.
Send the information needed for a complete Ram quotation
Mounting photographs and visible part labels help us specify the lower assembly. Add the preferred seat and details of any components proposed for reuse.
- Model year, chassis, original market and exact cab configuration.
- Drive configuration, actual steering arrangement and physical seat position.
- Existing bench or individual seats, floor repairs and previous conversions.
- Any centre seating to be retained and the actual restraint arrangement.
- Full SB262 side reference, supplied pattern and required adjustment.
- Chosen seat, driver requirements and intended road, work or track use.
Common questions
It follows Planted’s named first-generation Dodge Ram application for 1981-1993 and does not extend that bracket recommendation to a later-generation truck.
Send the exact cab, drive, market and current mounting details for assessment; the named application does not independently approve every complete installation.
Have the actual floor and both proposed lower assemblies checked as one conversion, including any centre seating and restraint equipment you want to retain.
State physical left and LHD beside the full SB262DR family reference, then confirm the supplied part against the actual truck.
SB262DR is Standard physical left, while COBRA-SB262DR is the Alternate physical-left pattern.
SB262PA is Standard physical right, while COBRA-SB262PA is the Alternate physical-right pattern.
Alternate substitutes Cobra / Scheel-Mann for the Standard Recaro slider pattern and needs specifying separately from the physical side.
Have a separately confirmed lower assembly specified for each seat, with the runners, supports and hardware itemised on the quotation.
Have the exact centre position and restraint arrangement assessed with the new installation; two individual-seat brackets do not specify that additional position.
Try the linked Monaco Pro, Sprint and TRS-E with the exact version, driver fit, mounting method and cab clearance in mind.
The guide links the Sparco R100, Corbeau Sportline RRS pair and Cobra Misano Anniversary for comparison with the actual driver and cab.
The linked product supplies a pair of seats. Specify a confirmed lower assembly for each position separately.
Send their exact references and mounting photographs so both fixing interfaces can be checked against the proposed assembly.
Confirm the exact runner and supplied bracket pattern together, because Planted distinguishes Narrow and Wide Cobra slider layouts.
Check its lower connection to the supplied bracket, its upper seat or support connection, handle access and operation of both locking runners.
Use suitable supports for a shell with side fixings and confirm their connection to the selected runner or lower bracket.
Have a fixed installation specified separately, because removing runners changes the attachment layout and does not establish fixing alignment.
Measure the complete assembly with the chosen seat. There is no universal reduction for every combination.
Have its actual attachments, buckle and routing assessed with the selected seat and the truck’s original restraint equipment.
The exact harness needs suitable vehicle anchors and routing assessed for its intended use. Seat openings are not those anchors.
Include photographs and details of the work so the installer can assess the actual attachments before the assembly is specified.
Include the year, chassis, cab, market, steering and drive configuration, physical positions, mounting photographs, original seating and restraints, preferred seat and intended use.
Garreth’s top tip
I would try the seat for entry as well as comfort once sitting in it. Include the clothes used for driving and how the Ram spends its time. Bring that choice to us and we can work through the complete fitting kit.
Cameron’s fitting view
For a bench conversion, start with the actual floor and the positions being changed. Write the physical side beside each full SB262 reference. Confirm the runner pattern and any retained centre seating before ordering.
Plan your Dodge Ram first generation (1981-1993) seat change
Drop us an email or open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Application sources: Planted physical-left Ram bracket, physical-right Ram bracket, installation guidance and FAQs. Confirm the exact truck and supplied fitting assembly.

![Planted Technology Dodge Ram [1st Generation] (1981-1993) Seat Bracket](https://www.sportseats4u.co.uk/wp-content/uploads/sites/2/2026/08/SB262DR-1-300x300.jpg)





