Dodge Challenger (1970-1974) Bucket Seat and Fitting Guide
Plan a supportive seat change for your classic Challenger
The original Challenger arrived for the 1970 model year, with two-door hardtop and convertible bodies recorded in Chrysler’s history. This guide follows Planted’s named 1970-1974 Challenger bracket application. Include the actual body style and year when choosing the kit.
SB207 is the listed lower bracket. Choose its physical side and supplied runner pattern, then work up to the selected seat. A restored or previously modified car needs the present floor and mounting arrangement checked against that plan.
For a road-going classic, compare a supportive recliner with a fixed bucket before committing. Try the complete driving position and the access you need behind the front seat. Include your helmet and other normal equipment if the car is used on track.
At a glance
- Named vehicle application: classic Dodge Challenger, 1970-1974.
- Listed lower bracket: Planted SB207; one confirmed side for each seat.
- Standard physical-left reference SB207DR; physical right SB207PA.
- Give the actual steering arrangement alongside the shop’s RHD position label.
- Standard and Alternate are separate runner-pattern choices.
- Include the body style, present floor condition and year-specific belt equipment in the fitting check.
Identify the model, body and present mounting arrangement
Send the model year and chassis details with the actual body style, original market and steering arrangement. A registration date alone is not the bracket application: Chrysler records that the 1970 model arrived in autumn 1969, while SB207 is named for the 1970-1974 model range.
If you have the later car, use our Challenger guide from 2008 onwards. For a classic, include photographs of the seat mounts and any restoration or previous seat conversion.
Start with the listed Planted SB207 bracket
SB207 is Planted’s named vehicle bracket for the classic Challenger. Confirm the physical side and the supplied runner pattern before choosing the upper components. Keep the full part reference beside the vehicle details on the quotation.
Itemise the bracket, any runners, seat supports and attachment hardware together. If the current seats already use adapters, send their references and photographs so we can check which parts, if any, belong in the new assembly.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Use physical left and right beside the part number
Planted’s Standard references are SB207DR for physical left and SB207PA for physical right. The shop uses RHD Passenger Side for the left reference and RHD Driver Side for the right reference. Include the actual steering arrangement when ordering.
On an LHD car, the driver’s seat is physical left. A driver label from one market can therefore describe the opposite position in another. Have the actual floor arrangement checked as well as the side if the vehicle differs from the manufacturer’s reference application.
| Physical side | Maker Standard | Maker Alternate | Shop position label |
|---|---|---|---|
| Left | SB207DR | COBRA-SB207DR | RHD Passenger Side |
| Right | SB207PA | COBRA-SB207PA | RHD Driver Side |
Confirm the pattern as well as the side
Both manufacturer side listings offer Standard and Alternate versions. Standard includes the Recaro slider pattern; Alternate exchanges that pattern for Cobra / Scheel-Mann. The shop side selector does not independently confirm an Alternate version.
Put the exact runner reference on the quote and check its lower attachment against the supplied bracket. Check its upper attachment against the seat or side supports too. A brand appearing in a compatibility list does not identify the dimensions of the complete assembly.
Try fixed buckets for support and everyday access
The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E are fixed-back options to try for support. Specify the exact seat version and its permitted mounting method before choosing the components above SB207.
In a two-door Challenger, include the route behind the front seat in the trial if you use the rear seating area. Check the outer shoulders and lower bolsters with the door closed, along with pedal reach, the gear selector and buckle access.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £244.40 Incl. VATFrom £203.67 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Compare reclining seats for a Challenger used on the road
The Sparco R100, Corbeau Sportline RRS and Cobra Misano Anniversary are reclining options to compare with the fixed buckets. Try the cushion and backrest with the driver and confirm the base fittings for the selected seat.
Reclining adjustment does not establish the entry space behind a fitted front seat. Trial the movement and controls in the actual car. The linked RRS listing supplies a pair of seats; each physical side needs its own confirmed lower assembly.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,649.00 Incl. VATFrom £1,374.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Specify the exact Cobra runner version
The linked Cobra Premium runners offer different handle-type choices. Give us the exact reference and check both mounting interfaces. A handle width alone does not describe every fixing dimension.
Planted distinguishes Narrow and Wide Cobra slider patterns. Confirm which runner and bracket version are being supplied together, rather than assuming that every Cobra runner fits either SB207 pattern unchanged.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Include adjustment in the complete fitting plan
The Sparco sliding runner kit is another option to assess with the chosen seat. Confirm the seat-side fixing and the attachment to the supplied SB207 before ordering.
During the trial, check that the handle is accessible and that both runners move and lock correctly through the travel required. Measure the driving position with the full assembly in place, including supports and spacers that form part of the agreed kit.
Add suitable supports for a side-mounted shell
A shell using side fixings needs suitable supports. The linked Sparco steel side mounts are an option to check against the exact seat and the lower assembly. Their presence in this guide does not establish that every shell uses the same fixing locations.
If you want a fixed installation without runners, have that arrangement specified separately. Removing a runner changes the attachment layout. Ask the installer to identify any bracket work required before buying the components.
Measure the finished position in the actual body
Trial pedal reach, steering-wheel clearance and visibility with the regular driver seated. Check the actual roof and trim clearance, including a closed convertible roof where applicable and the helmet used on track.
Include the console or gear selector, closed door, buckle access and rearward travel in the assessment. Have any roll structure considered with the seat position. Compare the complete assembly with the original height instead of assuming SB207 gives a fixed amount of lowering.
Check the restored floor and year-specific belt equipment
Show the installer the present floor attachments, including any replacement panels, repaired mounts or earlier adapters. Have those attachments assessed before choosing how the new seat assembly connects to them. Keeping the original parts labelled also makes the conversion easier to document.
Chrysler’s history records inertia-reel lap and shoulder belts and a belt-ignition interlock for the 1974 model year. Identify the equipment actually present on your car and include any relevant wiring in the fitting assessment. A model badge or replacement seat bracket does not specify that work.
Plan the belt or harness alongside the seat
For the existing belt, check the actual attachments, buckle position and belt path with the chosen seat in place. Include the car’s year and any previous belt changes when planning the work. Agree how the completed arrangement will be inspected.
For a harness, give us the exact model and intended use before choosing anchors. Have the routing assessed with the seat and vehicle structure under the relevant instructions. Shell openings are not vehicle anchors. Include event requirements if the Challenger is being prepared for competition.
Trial the bare bracket before assembling the seat
Start with the supplied parts and a trial of the bare SB207 against the present vehicle attachments. Assemble the chosen upper components and trial the complete driving position before final tightening, following the exact parts’ instructions and fastener requirements.
Agree any work needed for a fixed installation, repaired floor or existing adapter before assembly. The fittings above a vehicle bracket can require their own attachment plan. Complete the access, adjustment and restraint checks with the car as it will be used.
Keep the seat and complete kit on one quote
Send the car details and mounting photographs with the preferred seat and any parts proposed for reuse. Include the restoration or conversion history that affects the mounting area.
- Model year, chassis details, hardtop or convertible body and original market.
- Actual steering arrangement and physical seat position.
- Present floor attachments, repairs and any earlier seat adapters.
- Chosen seat version, SB207 side and supplied runner pattern.
- Adjustment, rear-area access and actual belt equipment, including relevant 1974 interlock wiring.
- Intended road or track use, with event details where applicable.
Common questions
Planted SB207 is the listed vehicle bracket. Confirm the car and physical side, then specify the seat and upper fittings as one assembly.
This guide follows the named 1970-1974 SB207 application. The later Challenger has separate bracket references and its own fitting guide.
The manufacturer identifies SB207DR as Standard physical left. The shop labels that position RHD Passenger Side. Include the actual steering arrangement with the order.
SB207PA is the manufacturer’s Standard physical-right reference, labelled RHD Driver Side in the shop.
Physical left is the driver’s position on an LHD car. Identify that physical side beside the full part number rather than relying on a driver label alone.
Have the actual vehicle configuration checked as well as the side. Planted’s general FAQ explains that not every international or RHD version has been verified.
It exchanges the Standard Recaro slider pattern for Cobra/Scheel-Mann. Confirm that pattern separately from the physical side and give the exact runner reference.
The side selection identifies a seat position. Ask us to confirm the supplied bracket pattern independently.
Specify runners separately when adjustment is required. Have the bracket, runner, supports and hardware itemised together.
Choose the permitted mounting method for the exact seat and check the complete assembly in the Challenger with the driver. A listed lower bracket does not establish shell clearance.
Compare the linked recliners and trial the actual movement and entry space inside the car. Reclining adjustment alone does not establish rear-seat access after installation.
The linked listing supplies two seats. Each physical position needs its own confirmed bracket and upper assembly.
Yes, specify suitable supports for the shell’s side fixings and check their connection to the runner or lower bracket.
Have a fixed installation specified separately. Removing the runners changes the attachment arrangement and does not establish that the remaining holes align.
Measure the finished position with the exact seat and all lower components assembled. No universal height reduction is established for every combination.
Trial the complete seat assembly with the door closed and the roof in its normal driving configuration. Include shoulders, bolsters, console, controls, buckle access and any driving equipment.
Chrysler records inertia-reel lap and shoulder belts and a belt-ignition interlock for the 1974 model year. Identify the actual equipment and any relevant wiring with the installer before the seat change.
Have its attachments and route assessed with the selected seat. Include buckle access and operation in the fitting trial.
The openings do not provide vehicle anchors. Specify the harness and intended use, then have the routing and attachments assessed as part of the complete installation.
Check the complete seat and restraint installation against the requirements of the event you intend to enter.
Send the exact part references and photographs of the present floor attachments. Have repairs and earlier adapters assessed before deciding which components can form part of the new assembly.
Include the model year, body style, chassis details, steering arrangement, physical seat position, floor photographs, preferred seat and actual belt equipment. List any parts proposed for reuse.
Garreth’s top tip
Bring a photo of the current interior and try the seat before choosing its trim. In a classic Challenger, include getting into the car and reaching the rear area in that trial, as well as the driving position.
Cameron’s fitting view
Start with the present floor attachments on a restored car. Put physical left or right beside the full SB207 reference, confirm the runner pattern, then check every connection up to the chosen seat.
Plan your Dodge Challenger (1970-1974) seat change
Drop us an email or open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Application references: Planted classic Challenger left bracket, right bracket, installation guidance and FAQs. Vehicle history: Chrysler Group’s 2010 Challenger history. History does not establish aftermarket floor or restraint compatibility; confirm the exact supplied kit and car.







