Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Datsun 510 (1968-1974) Bucket Seat and Fitting Guide

Choose seats and the complete fitting kit for your 510

Nissan’s heritage collection identifies the 510 as the third-generation Bluebird, introduced in August 1967. It records different bodies within that family. For the fitting kit, this guide follows Planted’s named Datsun 510 application of 1968-1974.

The listed vehicle bracket is Planted SB124. Identify the exact car and physical seat position, then choose the seat and the fittings above the bracket. Include the body style and original market with the enquiry, particularly on an imported car.

Compare a fixed bucket with a recliner using the person who will drive the car. Try support and getting in and out before settling on the trim. If the car is intended for competition, include the event or class requirements when planning the complete installation.

At a glance

  • Named vehicle bracket: Planted SB124, Datsun 510 (1968-1974).
  • The 510-series Bluebird identity does not establish every body or market fit.
  • Standard physical-left reference SB124DR; physical right SB124PA.
  • Shop driver/passenger labels refer to right-hand-drive cars.
  • Confirm the supplied Standard or Alternate runner pattern separately.
  • Trial the complete seat assembly with the driver and actual restraints.

Identify the 510-series car and its body

Send the chassis details with the actual year and original market. Identify two-door or four-door saloon, coupe, estate or van as applicable. Nissan’s heritage account describes those body variations, with the coupe added in November 1968 in Japan.

That history helps identify a 510-series Bluebird; it does not establish the mounting arrangement of every version. Have the actual floor attachments compared with SB124 before ordering. A Bluebird or 1600 badge alone is not enough to choose this bracket.

Show the floor attachments and any previous seat work

Photograph the current lower seat assembly and the floor attachment points before dismantling it. Record any adapter references and show repaired or altered mounts to the installer. Have their present condition assessed before committing to the replacement assembly.

Keep the original seat and lower components identified during removal. If parts from an earlier conversion are proposed for reuse, include their references and photographs with the enquiry. The fitting plan needs to address what is on the car now.

Start the fitting kit with the named SB124 bracket

SB124 is the vehicle-specific part below the selected seat assembly. Confirm the physical side and the supplied pattern for your actual 510. Include the seat’s mounting method beside those references on the quote.

A base-mounted seat needs compatible seat-side fittings and any runners required for adjustment. A side-mounted shell also needs suitable supports. Specify the attachment hardware with the components so the whole assembly can be checked.

Put the physical side beside the full part number

Planted identifies SB124DR as Standard physical left and SB124PA as Standard physical right. The shop labels those variants RHD Passenger Side and RHD Driver Side respectively. Put the physical position beside the full reference when ordering.

For an LHD car, physical left is the driver’s position. Include the actual steering arrangement with the enquiry and have the floor checked as well. A side label identifies a position, not every international vehicle configuration.

SB124 physical-side references and the separate runner-pattern choice
Physical sideMaker StandardMaker AlternateShop label
LeftSB124DRCOBRA-SB124DRRHD Passenger Side
RightSB124PACOBRA-SB124PARHD Driver Side

Confirm Standard or Alternate before choosing the runners

Both manufacturer side pages offer Standard and Alternate patterns. Standard includes the Recaro slider pattern; Alternate replaces that pattern with Cobra / Scheel-Mann. Confirm the supplied version independently of the shop’s side selection.

Put the exact runner reference on the quote with the bracket. Its lower attachment must suit the supplied SB124 pattern and its upper attachment must suit the seat or supports. The side selector alone does not settle those connections.

Compare fixed buckets for support and access

The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E give you fixed-back options to try. Their linked listings describe base and side mounting options. Choose the permitted method for the exact seat version and specify the components below it.

Try the exact seat with the driver in normal driving clothing and any equipment used on track. Check the shell’s outer shoulders and lower bolsters against the door trim and centre tunnel. Include getting in and out, with any cage and rear access requirements considered in the same trial.

Compare reclining seats for road use

The Sparco R100, Corbeau Sportline RRS and Cobra Misano Anniversary are base-mounted reclining options to compare with the fixed buckets. Try their cushion and backrest support with the driver.

Check the backrest through the range you will use and try the adjustment controls in position. On a two-door body, assess any rear access you intend to retain. The linked RRS listing supplies two seats, with a separate confirmed lower assembly needed for each position.

Match the exact Cobra runner to the bracket pattern

The linked Cobra Premium runner listing offers 291mm and 405mm handle-type options. Supply the exact runner reference and have both attachment interfaces checked. The handle choice alone does not identify every fixing dimension.

Planted distinguishes Narrow and Wide Cobra patterns. Narrow is included on both bracket versions; Wide calls for Alternate or a separately specified modification. Confirm the supplied version before buying rather than planning a modification from a generic compatibility label.

Specify adjustment with the complete seat assembly

The linked Sparco runner is another adjustment option to assess. Its upper fixing must match the seat or side supports, and its lower fixing must suit the supplied SB124. Agree both connections with the fitting kit.

Trial the handle where you can reach it and check that both runners lock correctly through the travel you will use. Include every regular driver in the position check. Judge height with the seat and all lower parts assembled.

Add supports when the chosen shell uses side mounting

The linked Sparco steel side supports are an option to check against a shell that permits side mounting. Match the shell’s fixing locations and specify the lower connection to the runner or bracket.

A direct fixed installation needs its own attachment plan. Planted’s instructions distinguish that arrangement from a sliding installation. Have any required bracket work specified by the installer; omitting runners does not prove that the existing holes line up.

Trial the complete position inside the actual body

Check pedal reach and visibility with the driver in the finished assembly. Use the normal helmet where relevant and assess headroom beneath the actual roof and trim. Include any cage or other structure near the seat in the trial.

Move the seat through the adjustment range needed by its regular drivers. Check the shell and handles against the door and tunnel, along with buckle access and the space behind the backrest. Resolve contact before final tightening.

Plan the restraints alongside the seat

Identify where the current belt and buckle attach and show those fittings to the installer. Check their position and operation with the replacement seat. A bracket tab or a matching seat pattern does not establish the finished restraint arrangement.

If you intend to use a harness, specify its exact model and purpose. Have the routing and anchors assessed with the seat and surrounding structure, following the relevant instructions. Harness openings in the shell are not anchors in the car. For competition use, check the complete installation against the event requirements.

Check the bare bracket before building the seat assembly

Planted’s instructions begin with trialling the bracket against the vehicle mounts. The upper components are assembled outside the car and the complete assembly is then trialled with the driver. Use the instructions and fastener requirements for the actual parts supplied.

Check adjustment and access in the intended position before completing the installation. Keep that position consistent during final tightening and recheck the moving parts afterwards. For competition use, have the finished assembly assessed against the event’s requirements.

Keep the whole fitting plan on one quote

Send the vehicle and mounting details with the seat you want to try. Include any existing components proposed for reuse. We can then check the bracket choice and work through the upper fittings with you.

  • Actual year, chassis details and original market.
  • Exact body style, present steering arrangement and physical seat position.
  • Photographs of the floor attachments and references on existing adapters.
  • Chosen seat version and confirmed SB124 side and runner pattern.
  • Adjustment and restraint requirements, plus event or class details where applicable.

Common questions

Planted SB124 is listed for Datsun 510 (1968-1974). Match that application to the actual car and floor attachments, then specify the seat and upper fittings.

Nissan identifies the third-generation Bluebird as the 510 and records its introduction in August 1967. Give the chassis details with the fitting enquiry. The family name helps identify the car but does not establish every mounting configuration.

Those are the years in the named Planted SB124 application. Nissan’s historical introduction date and individual market dates serve a different purpose. Have a car near a date boundary checked against the exact bracket application.

Identify the actual 510-series chassis and body before selecting parts. A Bluebird or 1600 badge alone does not establish the floor arrangement or make SB124 applicable to another generation.

The manufacturer gives a general Datsun 510 application. Include the exact body and original market and have the present floor attachments compared. Nissan’s account of different bodies is vehicle history, not approval of every bracket installation.

Planted’s named application starts at 1968. Have an earlier car’s identity and actual mounting arrangement checked before choosing a bracket. The model’s introduction date does not extend the fitting application automatically.

SB124DR is the manufacturer’s Standard physical-left reference, labelled RHD Passenger Side in the shop. Include the actual steering position with the enquiry.

SB124PA is the manufacturer’s Standard physical-right reference, labelled RHD Driver Side in the shop. On an LHD car, that physical position is the passenger’s side.

Have the exact floor checked before ordering. Planted explains that its reference vehicles are generally LHD and that not every RHD or international version has been verified. Physical side and mounting fit are separate checks.

Standard includes the Recaro slider pattern. Alternate replaces it with the Cobra/Scheel-Mann pattern. Confirm that supplied version separately from the driver/passenger selection.

The shop lists runners as a separate part for adjustment. Ask for the bracket, selected runner and any side supports to be itemised with their hardware.

Identify the exact runner and have its upper and lower fixing dimensions checked. The linked handle-type options alone do not specify every attachment dimension. Planted also distinguishes Narrow and Wide Cobra slider patterns.

Try the exact seat for support and access, then trial the complete assembly in the car. Have its permitted mounting method and proposed restraints checked. The vehicle bracket alone does not establish shell clearance.

Compare the linked recliners with the driver and specify their base fittings. Check backrest travel and the controls you need to reach. Include rear access requirements on a two-door body.

Specify suitable side supports for a shell using its side fixings. Check the lower connection as well. A direct fixed assembly and an assembly with runners need their own fitting arrangements.

Measure the finished position with the exact seat and all lower components fitted. Include the roof and normal driving equipment in the trial. No universal height-drop figure is established for every SB124 combination.

Show the work to the installer before ordering. Have the current attachment positions and condition assessed against the bracket. Identify any adapters proposed for reuse rather than assuming they suit the new assembly.

Have the actual belt and buckle attachments checked with the replacement seat. Confirm routing, access and operation during the trial, following the relevant component instructions. A bracket tab does not establish every buckle arrangement.

Specify the exact harness and intended use. Have its routing and anchors planned with the seat and vehicle structure under the relevant instructions. Shell openings do not provide vehicle anchors.

Give the event or class details before ordering. Have the proposed seat, mountings and restraints checked against its current requirements. A named road-car bracket application does not establish competition eligibility.

Have the full reference and actual attachment arrangement checked for this installation. A shared make or a similar year does not establish interchangeable floor fittings.

Send the vehicle and body details with mounting photographs and the physical side. Add the preferred seat, adjustment needs and intended restraints, including any components you hope to reuse.

Garreth’s top tip

Garreth would try support and getting in and out before choosing the seat trim. Include the access needed by the people who use the car. For competition, take the normal driving equipment into the seat trial.

Cameron’s fitting view

Cameron would keep the exact body and original-market details beside the SB124 side reference. Confirm the supplied runner pattern separately. Show any repaired mounts and existing adapter references when the full assembly is quoted.

Plan your Datsun 510 seat change

Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.

Back to the Car Seat Selector guide.

Sources: Planted’s physical-left and physical-right SB124 applications, installation instructions and fitting FAQ; Nissan’s 510-series identity and body history for vehicle context; and the linked shop listings. Check the current instructions for the exact components supplied.

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text