Nissan / Datsun 300ZX Z31 (1984-1989) Bucket Seat and Fitting Guide
Choose the seat and complete fitting assembly for your Z31
Nissan identifies the Z31 as the third-generation Z, introduced in 1983. For fitting parts, this guide follows Planted’s named Nissan / Datsun 300ZX application of 1984-1989. Send the chassis details with the year, particularly for cars registered near a changeover.
Our two linked Z31 frame listings identify the same Planted SB152 family. Choose the physical side and confirm the supplied runner pattern, then work upwards to the seat. A second listing does not mean that one seat needs two vehicle brackets.
Try a fixed bucket and a recliner with the person who will use the car. Support is only part of the choice: check getting in and out, adjustment and the space the finished assembly occupies. The roof and any rear access requirements belong in that trial.
At a glance
- Named fitting application: Planted SB152, Nissan / Datsun 300ZX (1984-1989).
- The shop’s SB152 and SB152-2 listings identify the same Z31 bracket family.
- Manufacturer Standard physical-left reference: SB152DR; physical right: SB152PA.
- RHD Driver Side is physical right; confirm the actual car’s floor as well.
- Specify the supplied Standard or Alternate runner pattern separately.
- Trial the complete seat assembly with the actual body, roof and restraints.
Start with the chassis, body and original market
Include the chassis identification with the actual year and original market. Tell us whether it is a two-seat or 2by2 car, the roof arrangement and the trim. Add the present steering position and any seat changes already made.
Nissan dates the Z31’s introduction to 1983 and the Z32’s launch to July 1989. Those historical dates explain why a registration year alone can leave a fitting enquiry unclear. Have an early or changeover car checked against the exact named bracket application before ordering.
Show the existing mounting arrangement
Photograph the lower seat assembly and each floor attachment before removing anything. Include the references on any existing adapters. Show repaired floors or altered mounts to the installer so the new bracket can be assessed against what is there now.
Record which seat functions and controls you want to retain. Keep the removed components identified during the work. A complete fitting plan should cover those requirements before the replacement seat is assembled.
Use one Z31 vehicle bracket for each seat position
Planted’s manufacturer references are SB152DR for Standard physical left and SB152PA for Standard physical right. Start with the linked SB152 listing and confirm the supplied version for the side being changed.
The vehicle bracket is the lower part of the assembly. Add compatible runners if adjustment is required and the appropriate fittings at the seat. A side-mounted shell also needs suitable side supports.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
The second shop listing identifies the same Z31 family
The shop also lists this Z31 bracket family under SB152-2. Both descriptions identify the listings as the same family. Use one vehicle bracket for each physical seat position and include the chosen shop reference on your quote.
The second listing’s side variations use SB152-2DR and SB152-2PA. Have the supplied manufacturer reference and runner pattern confirmed with that order as well. The shop suffix does not identify a new manufacturer bracket design.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Translate the side labels before ordering
Planted’s Driver / Left and Passenger / Right names follow its LHD reference vehicle. Our shop labels the corresponding positions RHD Passenger Side and RHD Driver Side. Keep physical left or right beside the code so that the steering arrangement is clear.
The SB152-2 shop variations add their suffix to those side references. That shop suffix does not establish a different manufacturer bracket design. Have the supplied part and the actual floor checked, including on an imported or converted car.
| Physical side | Maker Standard | Maker Alternate | Shop side label | Second listing's shop code |
|---|---|---|---|---|
| Left | SB152DR | COBRA-SB152DR | RHD Passenger Side | SB152-2DR |
| Right | SB152PA | COBRA-SB152PA | RHD Driver Side | SB152-2PA |
Confirm the bracket's runner pattern as a separate choice
The manufacturer offers Standard and Alternate versions on both Z31 side pages. Standard includes the Recaro slider pattern. Alternate replaces it with the Cobra / Scheel-Mann pattern.
The shop’s driver/passenger selection identifies a side; it does not select that manufacturer pattern option. Put the exact runner and supplied bracket version on the same quote. Check the runner’s upper attachment against the seat or side supports too.
Compare fixed buckets with the driver in them
The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E are fixed-back options to try for this enquiry. Their listings describe base and side mounting options. Choose the method permitted for the exact seat version and specify the fittings below it.
Try the cushion and backrest support in your normal driving clothing. For track use, include the equipment you will wear. Then check the shell’s outer shoulders and bolsters against the Z31 door trim and centre tunnel, with the complete lower assembly in place.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £244.40 Incl. VATFrom £203.67 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Try recliners for the access and adjustment you need
The Sparco R100, Corbeau Sportline RRS and Cobra Misano Anniversary are base-mounted reclining options to compare. Try the support and adjustment controls from the intended position. Check backrest travel against the space behind the seat.
For a 2by2, include the rear access you want to retain in the trial. A replacement recliner’s movement needs to be assessed in the car. The linked RRS listing supplies a pair of seats; each position still requires its own confirmed bracket and upper fittings.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,649.00 Incl. VATFrom £1,374.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Check the exact Cobra runner and the supplied bracket version
The Cobra Premium runner listing offers 291mm and 405mm handle-type options. Identify the exact runner and compare the attachment dimensions at both interfaces. The handle label is not a complete bolt-pattern specification.
Planted includes the Narrow Cobra slider pattern on both bracket versions. Its Wide pattern calls for Alternate or a separately specified modification. Settle the supplied version with the fitting enquiry before ordering.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Include adjustment in the assembled height check
The linked Sparco runner is an adjustment option to assess with the seat and bracket. Its upper attachment must suit the seat or side supports, and its lower attachment must suit the supplied SB152. Have both interfaces confirmed with the kit.
Try the release handle where it can be reached and check locking throughout the required travel. Include the usual drivers in the position check. Measure the finished height with every lower component fitted.
Choose side supports for the actual shell
Use the linked Sparco steel supports as an option to check for a shell that permits side mounting. Match the shell’s mounting locations and specify the connection below the supports. Follow the instructions for the precise components.
If you want a fixed installation without runners, have its attachment arrangement specified separately. Planted’s instructions explain that side supports and a vehicle bracket do not necessarily share a direct fixing pattern. Any required bracket work belongs in the fitting plan.
Trial the driving position with the roof fitted
Check visibility and pedal reach with the driver in the complete assembly. Include the helmet normally used on track. If the car has removable roof panels, assess headroom with those panels fitted and check the surrounding trim.
Move the seat through the travel you need, checking the shell and handles against the tunnel and door. Include buckle access and space behind the backrest. Resolve contact at the trial stage, before final tightening.
Specify restraints with the new seat position
Show the installer the existing belt and buckle attachments. Check their position and operation with the replacement seat. Have any affected seat equipment included in the fitting plan.
For a harness, specify the exact model and intended use. Its routing and anchors need to be assessed with the seat and vehicle structure under the relevant instructions. Harness openings in the shell do not provide anchors in the car; competition use also needs the finished installation checked against the event’s requirements.
Check the bracket on the floor before building upwards
Planted’s sequence begins by trialling the bare bracket against the vehicle mounts. The upper components are assembled outside the car and the whole assembly is then trialled with the driver. Use the instructions and fastener requirements for the parts supplied.
Keep the confirmed position consistent while completing the installation. Check adjustment and access again after tightening. If another bracket or a direct fixed arrangement is proposed, agree its exact reference and fitting instructions before substituting components.
Send enough detail to quote the complete assembly
Include photographs of the present mounting arrangement with the vehicle details and preferred seat. Identify anything you hope to reuse. We can then check the physical side and supplied pattern with the upper fittings.
- Chassis identification and actual year, including original market.
- Two-seat or 2by2 body, roof arrangement and trim.
- Present steering position and physical seat position being changed.
- Existing mounting photographs and adapter references.
- Exact seat, adjustment requirements and intended restraints.
Common questions
Planted SB152 is listed for Nissan / Datsun 300ZX (1984-1989). Match that named application to the chassis and current floor, then specify the complete seat assembly.
Both shop descriptions identify them as listings for the same Z31 bracket family. Choose one bracket for each physical position and confirm the supplied manufacturer reference and runner pattern. A second listing does not add another bracket to one seat.
The linked listing identifies the car as the Z31 300ZX in its description. Send the chassis details with the enquiry so the bracket is checked against the actual vehicle.
Nissan dates the Z31’s introduction to 1983, while Planted’s named SB152 application is 1984-1989. Have an early car’s identity and floor checked before choosing parts. The general model history does not extend that bracket application automatically.
Identify Z31 or Z32 from the chassis details. Nissan dates the Z32’s launch to July 1989, so the registration year alone does not settle the generation. Use the exact named application for the car.
The manufacturer gives a general 300ZX application. Include your exact body, trim and original market and have the current floor attachments checked. Model identity alone does not confirm every installation.
Trial the complete position with the roof panels fitted. Include normal track equipment where relevant and check the surrounding roof trim. The seat still needs its normal door, tunnel and backrest-clearance checks.
SB152DR is physical left, labelled RHD Passenger Side in the shop. The second listing uses shop code SB152-2DR. Confirm the supplied maker part with that listing.
SB152PA is physical right, labelled RHD Driver Side in the shop. The second listing uses shop code SB152-2PA. Include the actual steering arrangement with the enquiry.
Have the exact floor compared before ordering. Planted explains that its reference vehicles are generally LHD and that it has not verified every RHD or international model. Physical side and actual mounting fit are separate checks.
Standard includes the Recaro slider pattern. Alternate replaces it with the Cobra / Scheel-Mann pattern. Confirm the supplied pattern independently of the shop’s side selection.
Get the exact runner reference and attachment dimensions checked at both interfaces. The shop’s 291mm or 405mm handle-type choice is not a complete fixing specification. Planted also distinguishes Narrow and Wide Cobra slider patterns.
The shop lists runners separately for adjustment. Have the bracket, runners and any side supports itemised with the required hardware. Each seat position needs its own confirmed assembly.
Compare the linked fixed buckets with the driver and confirm the mounting method for the exact seat version. Trial the shell against the cabin with the lower fittings included. A matching bracket application does not establish clearance for every shell.
Try the linked recliners for support, backrest travel and control access. Include rear access requirements on a 2by2. Check that movement in the actual car before committing to the seat.
Specify suitable side supports for a shell installed through its side fixings. Confirm their connection to the runner or bracket. A direct fixed installation needs its own attachment plan.
Measure the finished position using the chosen seat and complete lower assembly. Include the actual roof and normal driving equipment in the trial. No universal height-drop figure is established for these combinations.
Show the work to the installer before ordering. Have the present mounting positions and condition assessed against the bracket. Identify existing adapters rather than assuming they can be reused.
Have the actual belt and buckle attachments checked with the replacement seat. Confirm routing, access and operation in the trial installation under the relevant instructions. A generic bracket tab does not establish every buckle arrangement.
Specify its exact model and intended use. Have routing and anchors assessed with the seat and structure. Harness openings are not vehicle anchors, and competition installations also need to meet the event’s requirements.
Have each proposed component checked for the exact Z31 installation. The 280ZX and Z32 are different generations. A similar model name or a generic installation heading does not establish an interchangeable floor bracket.
Send the chassis, year, market, body and roof details with the physical side. Add mounting photographs, the preferred seat and any parts to reuse. Include adjustment and restraint requirements so the whole assembly can be considered.
Garreth’s top tip
Garreth would try the seat with the driver and include getting in and out in the comparison. On a road-going 2by2, test the access you want to keep. Choose the finish once the support and movement suit the people using the car.
Cameron’s fitting view
Cameron would keep the chassis details and physical side beside the full bracket reference. Confirm Standard or Alternate separately, including when ordering from the SB152-2 listing. Check the proposed reuse of any existing fittings before the new assembly is quoted.
Plan your Nissan / Datsun 300ZX Z31 seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Sources: Planted’s left and right SB152 applications, installation instructions and fitting FAQ; Nissan’s Z31 heritage entry and Z32 introduction date for vehicle identity; and the linked shop listings. Check the current instructions for the exact components supplied.







