Chevrolet Sonic (2012+) Bucket Seat and Fitting Guide
Check the exact Sonic against the SB181 application
Planted lists SB181 for the Chevrolet Sonic with the application label 2012+. Give the actual year, original market and body details with the enquiry. Have the current mounts and complete upper assembly checked against the proposed seat.
Garreth would start with the support and adjustment the driver wants, then try the exact seat. Cameron would record the physical side and current lower fittings beside SB181. Include earlier changes to the seats or mounts.
At a glance
- Planted application label: Chevrolet Sonic, 2012+, SB181.
- Confirm the actual year, body and original market; the label alone does not approve every later version.
- Standard physical-left reference SB181DR; physical-right SB181PA.
- A related model or another market badge needs its own application check.
- Agree the supplied runner pattern separately from the shop side choice.
- Trial the completed seat for position, cabin clearance and restraint operation.
Keep the application label with the actual car details
Both manufacturer pages name Chevrolet Sonic (2012+). Treat that as the listed bracket application and supply the actual year and original market. Include the exact body configuration with the present steering arrangement.
Have the current floor mounts compared with SB181 before ordering. A similar model name or platform relationship does not establish compatible attachments. Cameron would keep the vehicle identification with photographs of the existing lower assembly.
Record the present seats and lower attachments
Photograph the existing seat, runners and any adapters before removal. Include their references where they can be identified. Show previous changes or repairs to the installer.
Have the condition and attachment interfaces of any retained components checked with the replacement assembly. Agree the mounting connections and hardware before removing the current seat.
Choose the support around your actual use
Describe what needs to improve about the current seat and who will use the car. Try the exact bucket or recliner with the driver. Garreth would compare the cushion and backrest support in the clothing and equipment normally used.
Try entry and exit as well as any access required behind the front seat. Check the movement provided by the chosen model. A reclining adjustment alone does not establish suitable access behind it.
Put SB181 and the upper fittings on the same quote
SB181 is the vehicle bracket for the proposed seat assembly. Confirm the physical side and supplied pattern with the exact Sonic application. Keep the selected seat’s mounting method beside those references.
A base-mounted seat needs compatible seat-side fittings; a side-mounted shell needs suitable supports. Include any runners required for adjustment. Ask for each attachment and the hardware to be specified as one assembly.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Match the physical side and runner pattern separately
Planted identifies SB181DR as physical left and SB181PA as physical right. The shop’s matching variations are RHD Passenger Side and RHD Driver Side respectively. Put the full reference beside the actual side being changed.
On an LHD car, physical left is the driver’s position even though the shop calls SB181DR RHD Passenger Side. Include the present steering arrangement with the enquiry. That label alone does not confirm the exact vehicle floor.
Standard includes the Recaro slider pattern; Alternate replaces it with Cobra/Scheel-Mann. Confirm the supplied version independently of the side choice. Check the exact runner at its upper and lower attachments.
| Physical position | Standard reference | Alternate reference | Current shop label |
|---|---|---|---|
| Left | SB181DR | COBRA-SB181DR | RHD Passenger Side, SB181DR |
| Right | SB181PA | COBRA-SB181PA | RHD Driver Side, SB181PA |
Try the fixed buckets with the driver
The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E are fixed-back options to compare for this enquiry. Their listings describe base and side mounting options. Confirm the permitted method for the precise seat version and itemise the fittings below it.
Try the shell with the driver seated and during entry and exit. Check its widest points against the surrounding cabin and any cage. Include the access behind the seat if you use that space. A matching bracket pattern does not establish clearance for every shell.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £244.40 Incl. VATFrom £203.67 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Compare backrest adjustment and the controls you can reach
The Sparco R100, Corbeau Sportline RRS and Cobra Misano Anniversary are base-mounted reclining options to compare with the proposed lower assembly. Try the exact model’s support with the driver. Garreth would include access to the adjustment controls when judging the position.
Check the backrest and runner movement through the range you intend to use. The linked RRS listing supplies two seats. Each position needs its own confirmed bracket and lower components, itemised separately.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,649.00 Incl. VATFrom £1,374.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Confirm the Cobra runner dimensions with the bracket
The Cobra Premium runner listing has 291mm and 405mm handle-type options. Get the exact runner reference and attachment dimensions checked at both interfaces. A handle label alone does not confirm the complete bolt pattern.
Planted distinguishes Narrow and Wide Cobra slider patterns. Narrow is included on both bracket versions; Wide needs Alternate or a separately specified modification. Agree the supplied SB181 version before ordering the upper assembly.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Check the Sparco runner above and below
Use the linked Sparco runner as an adjustment option to assess with the seat. Its upper attachment must suit the seat or side supports. Match the lower attachment to the supplied SB181 pattern as well.
Try the handle and lock operation with the complete assembly in position. Include each regular driver’s required travel. Check the final height with the runner and supports fitted, using the actual driving equipment.
Choose supports for the exact side-mounted shell
The linked Sparco steel supports are an option for a seat that permits side mounting. Check their attachment positions against the shell and specify the lower connection to the runner or vehicle bracket. Use the instructions for the actual components.
For a base-mounted installation, specify its seat-side fittings separately.
Trial the finished position before final tightening
Trial the complete assembly with the actual driver and compare visibility with the current seat. Include pedal reach and access to the other controls. Use the usual helmet or other driving equipment where relevant.
Run the adjustment through the range you will use and check the shell, handles and backrest against surrounding trim and any cage. Try getting in and out. Demonstrate any access required behind the front seat. Resolve contact and restricted controls during that trial.
Identify the existing restraints and seat equipment
Show the installer the actual belt and buckle attachments, along with any affected seat equipment or connections. Include changes made during an earlier conversion. Agree how those components will be dealt with before removing the existing assembly.
Follow the relevant seat, restraint and fitting instructions for the combination being installed.
Specify a harness installation with its anchors
If a harness is proposed, identify the exact model and intended use. Have its routing and attachment points assessed with the selected seat and surrounding structure. Include any cage or other components involved.
Harness openings in a shell do not provide anchor points in the Sonic. Follow the seat and harness instructions for the complete combination. For competition use, have the finished installation checked against the event’s requirements.
Trial the full assembly and itemise the quote
Planted’s sequence begins with checking the bracket in the vehicle, assembling the upper parts outside it and trialling the complete seat assembly. Resolve alignment and access during the trial. Complete the fitting using the instructions and fastener requirements for the actual components.
Send the full vehicle details and mounting photographs with the preferred seat version. Cameron would keep the physical side and supplied pattern beside SB181 on the quote. Include the driver and restraint requirements with the full parts list.
- Actual year, body configuration, original market and present steering position.
- Physical side and full SB181 reference, with the supplied pattern confirmed.
- Current mounting photographs and references of any adapters proposed for reuse.
- Exact seat version, runner and any side supports required.
- Driver requirements, access behind the seat and the restraint arrangement.
Common questions
Both Planted pages use Chevrolet Sonic (2012+). Keep that full label with the actual year, body configuration and original market. The current mounts and complete seat assembly still need checking.
Give the actual year and original market with the full model and body details. Include the present steering arrangement and photographs of the current lower mounts. Show any earlier seat or fitting changes.
Have the exact model and actual mounting points checked against the listed application. A related platform or similar body description does not establish floor interchange. Keep the vehicle identification with the fitting enquiry.
The label is the manufacturer’s stated bracket application. Have the actual model year, body and market checked against the vehicle mounts. Do not treat the open-ended label as confirmation of every later design.
Give the complete model identification and original market with mounting photographs. Have that exact application confirmed before selecting SB181. A different badge alone does not establish that the floor and seat attachments match the listed Sonic.
SB181DR is Planted’s Standard physical-left reference, labelled RHD Passenger Side in the shop. For an LHD car that is the driver’s position. Keep the physical side and full reference with the steering details.
SB181PA is the Standard physical-right reference. Its matching shop variation is RHD Driver Side. Reconcile the full reference with the actual position being changed.
Confirm the supplied Standard or Alternate pattern separately from the shop’s side choice. Check the exact runner dimensions and its upper connection to the seat or supports.
Standard includes the Recaro slider pattern; Alternate replaces it with Cobra/Scheel-Mann. Have the supplied version agreed with the exact upper assembly before ordering.
Specify the seat’s permitted mounting method with its seat-side fittings and any runners or supports required. Have the hardware and each connection checked together.
The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E are options to compare. Try the exact seat with the driver. Confirm the permitted mounting method and clearance with the lower assembly.
The Sparco R100, Corbeau Sportline RRS and Cobra Misano Anniversary are base-mounted reclining options to discuss. Trial the exact model’s support, adjustment and controls with the proposed fittings.
Demonstrate the movement required with the exact seat and fittings in the car. A reclining backrest alone does not establish access behind the front seat. Check the controls and surrounding clearance as part of that trial.
The linked RRS listing supplies two seats. Confirm the bracket and complete lower assembly for each physical position. Ask for both sides to be itemised on the quote.
Include supports when the exact shell uses side mounting and permits those supports. Confirm their attachment positions and lower connection. A base-mounted seat has its own seat-side fitting method.
The 291mm and 405mm choices are handle-type labels in the runner listing. Get the exact runner reference and its attachment dimensions checked at both interfaces.
Planted distinguishes Narrow and Wide patterns. Narrow is included on both bracket versions; Wide needs Alternate or a separately specified modification. Agree the exact runner with the supplied bracket version.
Send photographs and the references of the existing lower components. Have any altered mounts or previous repairs assessed against the proposed assembly. Include every part you would like to retain.
Have their condition, dimensions and both attachment interfaces checked with the replacement seat and bracket. Their previous use in the car does not confirm the new combination.
Trial the full assembly with the driver and compare it with the current seat. The seat, supports, runner and vehicle bracket affect the position. Check visibility and control reach during the trial.
Specify a direct mounting method and its hardware separately, then trial the resulting position against the component instructions. Confirm that each driver can reach the controls and that the seat clears the cabin.
Record the actual belt and buckle attachments plus any affected seat equipment or connections. Agree the plan for those components with the installer. Include changes made during earlier conversions.
The harness needs its own routing and anchor assessment with the chosen seat and surrounding structure. Follow the seat and harness instructions for the full combination. Competition use also needs the completed installation checked against the event’s requirements.
Send the vehicle details, mounting photographs and the physical side with your preferred seat version. Include the proposed runner or supports. Add the driver, access and restraint requirements so the complete assembly can be checked.
Garreth’s top tip
Garreth would compare the exact seat with the driver’s support and access requirements before choosing the finish. Try it in the clothing and equipment normally used. Judge the final position with the proposed lower fittings included.
Cameron’s fitting view
Cameron would keep the full Sonic application, physical side and supplied pattern beside SB181 on the quote. Include the present mount and adapter references. Trial the complete assembly with the driver and actual restraints.
Plan your Chevrolet Sonic (Planted application: 2012+) seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Sources: Planted’s physical-left and physical-right SB181 applications, installation instructions, runner-pattern guidance and the linked shop listings. Confirm the actual vehicle against the full application label with the fitting enquiry.







