Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Chevrolet Camaro (2010-2015) Bucket Seat and Fitting Guide

Choose the Camaro bracket by version and physical side

Planted lists SB137 for the 2010-2015 Camaro and a separate SB137.1 left-side application for the ZL1. Start with the exact version and the physical position being changed. The supplied bracket pattern then needs matching to the seat, runners and any supports.

Garreth would compare the proposed seat with the driver’s present position before choosing a finish. Cameron would put the full lower-fitting references beside that seat on the quote. Include the current seat equipment and any changes already made around its mounts.

At a glance

  • Reviewed bracket period: Camaro 2010-2015; confirm the actual year and version.
  • SB137DR is the non-ZL1 physical-left route; SB137PA is physical right.
  • The separate ZL1 physical-left reference is SB137.1DR.
  • The current ZL1 shop option needs a supplied-reference check before ordering.
  • Standard and Alternate runner patterns are separate from physical side.
  • Trial the complete seat assembly for position, visibility, access and restraints.

Identify the version before choosing a bracket

Give the model year and exact Camaro version, along with original market and present steering position. The bracket listings distinguish the ZL1 from the wider range on the physical-left side.

The manufacturer’s 2010-2015 ZL1 bracket application is a fitting reference. Use the car’s actual year and identification when enquiring. Have the current vehicle mounts checked if there has been a previous conversion or repair.

Record the seat and equipment already fitted

Send the present seat reference and photographs beneath it. Identify any original or aftermarket adapters and the connections the installer needs to assess. If the car has a Recaro seat, include its precise model and lower assembly.

Compare what the replacement needs to improve with the current seat, including support, access or adjustment. Any parts proposed for reuse need their own condition and interface checks before selecting the new shell.

Show the floor mounts and driving position

Photograph the mounting points and any floor changes. Include adapters already fitted. Have the installer assess repairs and the proposed bracket connection. Show any cage or interior changes that affect the space around the seat.

Record the driver’s present reach and view from the car. Trial the proposed seat with all its lower components before agreeing the finished position. A different shell or bracket does not by itself establish whether the driver will sit higher or lower.

Specify SB137 for the confirmed side and version

The linked shop SB137 product is listed for Camaro 2010-2015 excluding ZL1, matching the exclusion on Planted’s physical-left SB137DR page. Keep the version and complete side reference with the seat enquiry.

The maker’s SB137PA physical-right title uses the broader Camaro name. For a ZL1 right-side enquiry, have the application confirmed explicitly before ordering. The title alone does not settle that particular installation.

Confirm the supplied ZL1 bracket before ordering

Planted lists the Camaro ZL1 physical-left bracket as SB137.1DR, with COBRA-SB137.1DR for the Alternate pattern. Keep that full reference distinct from the non-ZL1 SB137DR when specifying the lower assembly.

The current ZL1 shop option is labelled RHD Driver Side and carries SB137.1PA. That differs from the physical-left SB137.1DR reference on the reviewed manufacturer page. Ask us to confirm the supplied part and physical side before ordering this option.

Keep physical side separate from runner pattern

For standard SB137, the actual shop SB137DR variation is RHD Passenger Side and SB137PA is RHD Driver Side. Reconcile those references with the car’s present steering position. Keep the unresolved ZL1 shop reference separate from that standard-bracket cross-check.

Planted offers Standard and Alternate (Cobra/Scheel-Mann) patterns on the three reviewed manufacturer pages. Standard includes the Recaro slider pattern; Alternate exchanges it for Cobra/Scheel-Mann. Confirm the intended supplied pattern separately from the shop’s side option.

Manufacturer physical-side references, pattern options and current shop checks
Application and physical sideStandard referenceAlternate referenceCurrent shop check
Non-ZL1, leftSB137DRCOBRA-SB137DRSB137DR, RHD Passenger Side
Camaro, right; confirm ZL1 separatelySB137PACOBRA-SB137PASB137PA, RHD Driver Side; shop product excludes ZL1
ZL1, manufacturer left applicationSB137.1DRCOBRA-SB137.1DRAvailable shop option SB137.1PA, RHD Driver Side; supplied reference and side unresolved

Compare fixed buckets with the driver

The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E are fixed-back options for the enquiry. Garreth would compare their support with the actual driver. Try the exact seat version in the clothing and equipment used in the car.

Their listings describe base and side mounting options. Confirm the permitted method for the precise seat version, then specify the connections below it. A side-mounted arrangement also needs compatible supports.

Check the shell against the door trim and console or cage. Include entry and access behind the seat if that space is used. A compatible runner pattern alone does not establish that every seat clears this Camaro.

Try recliner controls and the movement required

The Sparco R100, Corbeau Sportline RRS and Cobra Misano Anniversary are base-mounted reclining options to compare. Trial the exact model’s support and controls. Include the proposed lower assembly when assessing the finished position.

If access behind the front seat matters, demonstrate the movement needed. Confirm which functions the chosen model provides and how much room they need in the Camaro. A reclining adjustment alone does not establish suitable access.

The linked RRS listing supplies a pair of seats. Each position still needs its own confirmed bracket and any other lower components. Ask for the fittings on both physical sides to be itemised.

Confirm the exact Cobra runner pattern

The Cobra Premium runner has 291mm and 405mm handle-type options in the shop. Identify the precise runner and check the attachment dimensions at both interfaces. The handle label alone does not establish the complete mounting pattern.

Planted distinguishes Narrow and Wide Cobra runner patterns. Narrow is included on both bracket versions; Wide calls for Alternate or a separately specified modification. Agree the supplied bracket version with the runner before ordering.

Check the Sparco runner with the selected fittings

The linked Sparco runner is an adjustment component to discuss with the chosen seat. Its upper connection must suit the seat or side supports. Check the lower connection against the exact supplied SB137 or SB137.1 pattern as well.

Try the usable travel and handle access in the completed assembly. Each regular driver needs a suitable position and working lock operation. Include the runner with the seat and supports when checking the finished height.

Match the supports to a side-mounted shell

The linked Sparco steel supports are an option where the seat uses side mounting. Confirm their permitted use and attachment positions against the exact shell. Then specify how they connect to the runners or vehicle bracket.

A base-mounted arrangement uses its own seat-side fittings. Keep that method explicit on the quote so the installer can check each joint. Use the hardware and instructions for the actual components selected.

Trial reach, visibility and cabin clearance together

Check the driver’s view and access to the controls with the full assembly in the car. Include the usual helmet or other equipment where relevant. Compare the position with the present seat and the requirements of every regular driver.

Check the shell and any recliner controls against the door, console and cage. Try entry, exit and access behind the front seat where needed. Run the adjustment through the range that will actually be used.

Agree a direct mounting arrangement separately if runners are unnecessary. Trial its resulting position with the exact shell and supports. Omitting a runner does not establish a suitable final height or control reach.

Identify the current restraints and affected connections

Show the installer the actual belts, buckles and attachment points. Include any wiring or other seat equipment that needs identifying. Changes made during an earlier conversion belong on that assessment too.

Agree the attachment and connection plan before removing the existing seat. Use the relevant instructions for the components in the car and the proposed replacement assembly. The year and bracket listing alone do not approve every current restraint or electrical arrangement.

Plan a harness with the seat and intended use

Identify the exact harness if one is proposed. Have its routing and anchors assessed with the seat and surrounding structure. Include any cage or other components involved in that installation.

Harness openings in a shell do not establish anchor points in the Camaro. Follow the seat and restraint instructions for the complete combination. Competition use also needs the finished installation checked against the event’s requirements.

Trial the full assembly before final fitting

Planted’s sequence begins with checking the bracket in the vehicle, assembling the upper components outside it and trialling the complete seat assembly. Resolve alignment and access during that trial. Use the actual component and fastener instructions when completing the job.

Send the vehicle details and current mounting photographs with the preferred seat version. Describe the intended use and restraint arrangement. Cameron would keep the physical side, supplied pattern and upper mounting method beside the complete parts list.

  • Exact year, Camaro version, original market and present steering position.
  • Physical side, bracket reference and photographs of floor mounts and adapters.
  • Current seat reference, equipment, interior changes and any cage.
  • Preferred replacement seat, supplied runner pattern and any side supports.
  • Driver position, visibility, access and actual or proposed restraints.

Common questions

The reviewed brackets list a 2010-2015 Camaro application, so give the actual year and version with the enquiry. A bracket’s period label does not establish the production dates of every named version.

Planted’s SB137DR physical-left application excludes ZL1. The separate listed ZL1 left reference is SB137.1DR. Keep the version and full bracket reference together on the quote.

The manufacturer names Camaro 2010-2015 on that physical-right listing. Have a ZL1 right-side enquiry confirmed explicitly before ordering. The broader title alone does not approve that particular installation.

Planted lists SB137.1DR as Standard and COBRA-SB137.1DR as Alternate for that application. Confirm the exact supplied pattern with the runner choice. Reconcile the shop option with the car’s steering position.

The only current shop variation carries SB137.1PA and is labelled RHD Driver Side. The reviewed manufacturer ZL1 page lists physical-left SB137.1DR. Ask us to confirm the supplied part and position before ordering that shop option.

For standard SB137, the current shop SB137DR option is RHD Passenger Side and SB137PA is RHD Driver Side. Reconcile those references with the actual steering position. The separate ZL1 shop reference remains unresolved.

Planted lists the runner pattern separately from physical side. Confirm the intended supplied version with the runner and seat assembly. The shop’s side option alone does not establish that pattern.

Standard includes the Recaro slider pattern. Alternate replaces it with Cobra/Scheel-Mann. Check the precise runner’s attachment dimensions and its upper connection to the seat or supports.

Those are the linked runner’s handle-type options. Confirm the attachment dimensions at both interfaces because the label alone does not check the complete pattern.

Planted distinguishes Narrow and Wide Cobra patterns. Narrow is included on both versions; Wide calls for Alternate or a separately specified modification. Agree the exact runner and supplied bracket version before ordering.

The Cobra Monaco Pro, Sparco Sprint and OMP TRS-E are options for the enquiry. Try the exact version with the driver. Check its permitted mounting method and clearance with the full lower assembly.

The Sparco R100, Corbeau Sportline RRS and Cobra Misano Anniversary are base-mounted options to discuss. Trial the exact model’s support, controls and movement. Include the proposed lower fittings when assessing the finished position.

Demonstrate the access required when trying the seat. Confirm the chosen model’s functions and movement in the Camaro. A reclining adjustment alone does not establish suitable access.

The linked listing supplies two seats. Each physical position still needs its own confirmed bracket and lower components. Ask for the complete fittings on both sides to be itemised.

A side-mounted arrangement needs supports permitted for the exact shell. Check their attachment positions and connection to the runners or bracket. A base-mounted arrangement uses its own seat-side fittings.

Send the references, attachment dimensions and photographs so the installer can check their condition and both interfaces against the proposed assembly. Previous use in the car does not establish compatibility with replacement components.

Include the exact seat reference and photographs of the complete lower assembly. Have any proposed reuse or change assessed against those actual components. The brand name alone does not identify every mounting arrangement.

Trial the complete assembly in the actual car. The seat, supports, runners and vehicle bracket affect the resulting position. Compare visibility, headroom and control reach with the driver seated.

Assess the driver’s view from the finished trial position in the car. Include the usual helmet or equipment where relevant. Compare it with the present seat before agreeing the installation.

Have the direct mounting method and hardware specified separately. Trial its resulting position against the component instructions. Omitting adjustment does not establish suitable height or reach by itself.

Identify the actual belts, buckles and affected seat equipment or connections. Agree the plan with the installer using the relevant instructions. The vehicle year and bracket listing alone do not approve every current arrangement.

The harness needs its own routing and anchor assessment with the chosen seat. Follow the restraint and seat instructions for the full combination. Competition use also needs the finished installation checked against the event’s requirements.

A car outside the reviewed 2010-2015 period needs its own current bracket check. Keep the actual year and version with the fitting enquiry.

Send the year, exact version, steering position and physical side with mounting photographs. Include the current seat equipment and preferred replacement seat, runners and supports. Add driver position, visibility, access and restraint requirements so the complete assembly can be checked.

Garreth’s top tip

Garreth would compare the proposed support with the driver’s existing seat. Try visibility, reach and access before choosing the finish. Keep the exact seat version with the full lower assembly when judging the change.

Cameron’s fitting view

Cameron would write physical left or right beside the exact bracket reference, with the Camaro version clearly marked. Confirm the supplied runner pattern and upper mounting method on the same quote. Trial the assembly with the actual driver, equipment and restraints.

Plan your Chevrolet Camaro (2010-2015) seat change

Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.

Back to the Car Seat Selector guide.

Sources: Planted’s non-ZL1 physical-left, physical-right and ZL1 physical-left applications, installation instructions, pattern guidance and linked shop listings. Confirm the exact vehicle and current component instructions with the fitting enquiry.

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text