Chevrolet Cobalt 2005 to 2010 Bucket Seat and Fitting Guide
Choose the Cobalt bracket and complete seat assembly together
For a Cobalt seat change in Planted’s 2005 to 2010 application, start with the driving position and adjustment you want. Our listed SB225 is the floor-bracket route to discuss. Choose the seat and every fitting above that bracket as one complete assembly.
Garreth would try the seat’s support and getting over the bolster before choosing a finish. Cameron would identify the actual floor and physical seating side. Send the build details and photographs of the current mounts with the enquiry.
At a glance
- Planted names the Chevrolet Cobalt 2005 to 2010 application for SB225.
- SB225DR is the maker’s physical-left reference and SB225PA is physical right; match the actual steering side and supplied shop code.
- Cobra-prefixed alternate references and the exact runner pattern are separate checks from the physical side.
- Record the actual body, trim and original seat arrangement, including any previous mounting changes.
- Specify the floor bracket, runner or fixed connection and any shell supports as a complete package.
- The scaled Sparco diagram describes named seat-side centres, separate from the Cobalt floor.
Record the actual Cobalt and its existing mounts
The manufacturer’s application records name Chevrolet Cobalt 2005 to 2010. Give the actual build, body and trim details when checking that application. A registration date or SS badge is only part of the information needed.
Photograph the existing seat connections and show any earlier floor, bracket or runner changes.
Tell us which original functions, seating positions and belt arrangement you want to retain. Cameron would compare the actual mounts before choosing the supplied parts. Another Chevrolet or Pontiac model needs its own exact application check.
Match the SB225 reference to the physical side
The listed SB225 is the vehicle connection for Planted’s named Cobalt application. The maker identifies SB225DR for physical left and SB225PA for physical right. Specify the full reference for the position being changed.
Our shop options use RHD seating-side wording, so confirm the actual supplied variation code and steering side together.
The floor bracket is one part of the assembly. Check the seat’s lower connection, any runner or supports and the retained buckle hardware as separate items. Include each required quantity when a pair of seats is being planned.
| Physical position | Manufacturer reference | Cobra alternate reference |
|---|---|---|
| Left | SB225DR | COBRA-SB225DR |
| Right | SB225PA | COBRA-SB225PA |
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Confirm the slider pattern separately from the seating side
Planted publishes Standard and Alternate bracket-pattern choices. Its fitting FAQ directs wide Cobra and Scheel-Mann runners to the Alternate pattern. The narrow Cobra runner pattern is included on both versions.
The SB225 application records include the Cobra-prefixed alternate codes in the table above.
Give us the complete seat and runner references before choosing that option. The upper seat connection and lower bracket connection need their own dimensions. Cameron would confirm the supplied version with both interfaces in view.
Compare fixed-back seats by support and mounting route
The Cobra Monaco Pro is a fixed-back steel-frame seat to try for support and bolster access. Its listed base and side mounting choices need the matching lower arrangement. Confirm the full supplied version and label before selecting the fittings.
The standard Sparco Sprint card carries the BRR0003 family reference, with base and side fixing routes shown in the maker catalogue.
The OMP TRS-E Velour is another steel-frame option, with base or side mounting listed. Try the cushion and entry as well as the seated position. Garreth would choose the seat that suits the driver before settling the trim and complete Cobalt fitting enquiry.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £244.40 Incl. VATFrom £203.67 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Try reclining choices with their controls and lower fittings
The Sparco R100 is a base-mounted reclining option. Our listing uses the legacy 00961NR reference, while the newer catalogue uses the 009014 family. Confirm the actual supplied version before using the catalogue drawing to choose fittings.
The Corbeau Sportline RRS card shown here is a pair of seats on the listed standard base; each physical position still needs its own vehicle bracket and selected upper assembly.
The Cobra Misano Anniversary has its own shell, reclining mechanism and trim choices. Compare the cushion and bolster access with the other seats. Trial the controls and backrest movement beside the actual door and tunnel before confirming the installation.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £1,649.00 Incl. VATFrom £1,374.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Match the Cobra runner to both connections
The Cobra Premium runner listing offers 291mm and 405mm handle-width options. Select the runner for the exact seat and the supplied SB225 slider-pattern version. The handle label does not establish the lower hole layout on its own.
For a Monaco or Misano enquiry, send the complete seat and runner references together.
We would check the upper seat connection and the lower floor-bracket connection independently. Confirm the useful travel and room for the release handle in the Cobalt. The runner’s thickness is also part of the final seating position.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Specify the Sparco slider with the actual seat version
The Sparco 0049306 runner is a sliding option to discuss with the named Sparco seats. The catalogue shows a 271mm longitudinal fixing distance. Confirm its complete upper and lower layout against the seat, supports where used and supplied SB225 version.
The named Sprint and R100-family seat-side base fastening discussed below is 345mm by 271mm.
Check that both rails release and lock throughout the travel required by the driver. Include handle access and the surrounding trim in that trial. A shared dimension at one connection does not verify the remaining assembly.
Use supports specified for the chosen side-mounted shell
A side-mounted bucket needs supports connecting its side fixings to the lower assembly. The Sparco steel supports shown here are a candidate to specify with the selected Sparco shell and its instructions. Other seat families need their own confirmed support combination.
Seat-side fixings and the support’s lower fixing pattern are separate interfaces.
Cameron would match the support orientation and fastener specification to the exact shell, then check the connection below it. Include any runner in that drawing comparison. The shell label and the vehicle-bracket application answer different parts of the enquiry.
Plan fixed positioning as its own complete arrangement
Planted publishes separate installation arrangements for base-mounted and side-mounted seats, with and without sliders. Its FAQ describes its own side mounts around an arrangement using sliders beneath them. Removing a runner changes that connection and the finished position.
If you want a fixed seat, ask us to specify that arrangement before ordering the lower fittings.
Trial the vehicle bracket and the proposed assembly using the relevant component instructions. Check reach and clearance with the actual driver. Garreth would keep getting in and out of the seat in that decision, alongside the final driving position.
See the named Sparco seat-side centres at one scale
The Sparco catalogue gives 345mm across and 271mm front to rear for the named Sprint and R100-family lower fastenings. The drawing shows those two dimensions at one scale. Confirm the exact supplied seat version before using them to select components.
These are seat-side fastening centres; the Chevrolet floor pattern, full SB225 slot layout and outside seat dimensions are separate measurements.
Measure the preferred seat and complete lower assembly in the actual cabin. Include shoulder room and access to the controls. For a Cobra, Corbeau or OMP choice, use that exact version’s drawing instead of inheriting the Sparco pattern.
Source: Sparco 2025 manufacturer catalogue, printed pages 178 and 326 to 327. The shop’s R100 reference needs supplied-version matching.
Choose the restraint with the shell and actual anchors
Include the intended belt arrangement before the fittings are finalised. Match the selected seat and restraint instructions to the actual anchors and driver. A bracket tab or a set of harness openings is one part of that complete plan.
Send photographs of the existing buckle connection and any proposed harness bar or cage. We would check routing and buckle access with the seat in its intended position. Choose a harness product after its configuration and attachments are established.
- Original belt: check the exact shell, buckle position and retained mounting hardware.
- Harness: confirm the required straps, shell openings and available anchor arrangement together.
- Two seats: specify each physical side, quantities and the adjustment needed by each occupant.
Send the vehicle and complete fitting references together
Send the actual build, body and steering side with photographs of the current floor and original mounting locations. Include the full seat, runner and support references. Tell us which original functions, access and restraint arrangement need to remain.
We can then check the SB225 physical side, supplied pattern and upper fittings together.
Measure the existing driving position if a height change is the aim. The cushion, shell angle and every fitting below the seat affect the result. Cameron would check the complete trial position with the driver before confirming reach and clearance.
Common questions
Which bracket is listed for a 2005 to 2010 Cobalt?
The listed Planted route is SB225. The maker’s application names Chevrolet Cobalt 2005 to 2010. Match the actual build, original floor and current supplied bracket before ordering.
Which manufacturer code is physical left or right?
SB225DR identifies physical left and SB225PA physical right. The Cobra-prefixed alternate references retain those physical positions. Confirm the actual steering side and full supplied shop variation code.
Are the RHD shop labels enough to choose the side?
Include the physical position and actual steering side as well. The maker’s Driver/Left and Passenger/Right labels need matching to the car. Confirm the supplied variation code before the order is completed.
Does an SS badge establish the fitting application?
Send the actual body, build and original seat details with photographs of the mounts. The badge alone does not describe the floor or previous changes. Confirm the proposed complete assembly against that information.
Can I use this bracket for another Chevrolet or Pontiac?
Give the exact model and build for a separate application check. A shared brand or similar seat does not establish the same floor connection. Use that vehicle’s named manufacturer reference.
What should I check about Standard and Alternate patterns?
Planted’s general FAQ directs wide Cobra and Scheel-Mann runners to the Alternate pattern and says narrow Cobra runner fixings are included on both. Confirm the exact runner, supplied bracket version and both fixing interfaces.
Does the Corbeau RRS pair include two Cobalt brackets?
The linked card is a pair of seats on the named standard base. Specify each vehicle bracket and selected upper assembly separately. Check the actual contents and quantities for both physical positions.
Can the seat be fitted without sliding adjustment?
Planted provides separate fixed installation arrangements. Removing a runner changes the lower connection and finished position. Ask us to specify the complete fixed assembly for the selected seat and actual car.
What does the 345mm by 271mm drawing show?
It shows the named Sparco seat-family lower fastening centres from the manufacturer catalogue. The Cobalt floor and full SB225 layout need separate references. Match the exact supplied seat version and each remaining interface.
How much lower will a bucket seat sit?
The cushion, shell angle, supports and runner or fixed connection determine the final position. Measure the existing arrangement and trial the proposed assembly with the driver. A floor-bracket code cannot predict a reduction.
What if I want to retain the original seat functions?
Include the actual specification and functions you want to retain before selecting the seat. The floor bracket establishes only one connection in the replacement assembly. Confirm the selected components and vehicle requirements with the fitter as part of that plan.
What information should I send for a recommendation?
Send the actual build, body, steering side, physical position and mounting photographs. Include the full seat and fitting references, adjustment wanted and intended belt arrangement. Tell us about any previous adaptation.
Garreth’s top tip
Garreth would try the seat’s support, entry and adjustment before choosing its finish. Keep everyday access and the way the Cobalt is used in that decision. The lower fittings can then be specified around that exact seat.
Cameron’s fitting view
Cameron would match the actual Cobalt floor and physical side to the supplied SB225 reference. Keep the seat, supports and runner or fixed connection in one parts list. Trial the complete position with the driver before confirming reach and clearance.
Plan your Chevrolet Cobalt 2005 to 2010 seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Sources: Planted application records, slider-pattern and market guidance and assembly-specific instructions; Sparco 2025 catalogue, printed pages 178 and 326 to 327; linked shop listings. Confirm the current supplied versions and actual car before completing the package.







