Which Seats Suit A 6ft 6 Driver In A Seat Leon Mk3 (5F), Including Frames And Sliders?
A customer who is 6ft 6 with a 34 inch waist asked us which seats, frames and sliders suit a Seat Leon Mk3 for a pair, with a budget of £800 to £1000. We'd put a pair of Sparco R100 or R500 reclining seats on the Sparco Leon Mk3 frames with a Sparco twin runner kit, and both builds come in inside the budget. At his height, whether they suit him comes down to headroom, so that's the part we'd want measured first.
- Prices read from the live site, inc VAT
- Every part listed here bolts to the same 345mm x 271mm base pattern
- Frames and runners are matched to the seat before you order

A Sparco R100 or R500 pair, two Sparco Leon Mk3 frames and one twin runner kit
£645.98inc VAT
Both seats are base mount, so no side mounts are needed. The totals use the live prices.
- Seats: the Sparco R500 pair at £645.98 or the Sparco R100 pair at £540.00
- Frames: two Sparco Seat Leon Mk3 sub-frames at £93.60 each, one for each side
- Sliders: one Sparco twin runner kit at £78.00 for fore and aft adjustment
- Parts total £911.18 with the R500 or £805.20 with the R100
Two pairs of seats with frames and runners, added up
The budget was £800 to £1000 for two seats with mounting and sliders. Sparco’s base mount recliners suit that, because a base mount seat bolts to the frame without side mounts. Underneath each seat there’s just the frame and a runner from the kit. Here’s what each build adds up to at the live prices.
| Part | How many | Price inc VAT |
|---|---|---|
| 2 Sparco R500 Fabric Reclining Sport Seats | 1 pair | £645.98 |
| Sparco Seat Leon Mk3 Direct Fit Sub-frame | 2, one driver side and one passenger side | £93.60 each, £187.20 for two |
| 2 Sparco Seat Sliding Runner Kit | 1 twin kit | £78.00 |
| Parts total | £911.18 |
| Part | How many | Price inc VAT |
|---|---|---|
| 2 Sparco R100 Black Reclining Sport Seats | 1 pair | £540.00 |
| Sparco Seat Leon Mk3 Direct Fit Sub-frame | 2, one driver side and one passenger side | £93.60 each, £187.20 for two |
| 2 Sparco Seat Sliding Runner Kit | 1 twin kit | £78.00 |
| Parts total | £805.20 |
Prices include VAT. Both seats are listed Road and Track, with no FIA approval.
Our existing guides cover the car in general: the top five reclining seats for the Leon Mk3 and the Seat Leon Mk3 (5F) bucket seat guide with all six frames. For a driver at 6ft 6, what we’re watching is where his head ends up.
Sparco R500 and R100: the two seats for a tall driver on this budget
The R500 sits on a narrower tubular steel frame with lower side bolsters, built for cars where a wider shell fouls the sill or the transmission tunnel. The cover is a 3D woven breathable cloth, and Sparco list it for all heights with a 32 to 36 or 36 to 38 inch waist. A 34 inch waist sits in the first band.
Garreth likes it at your height for the recline, a lever with fine adjustment of the backrest angle. A few degrees either way sets where your head sits against the headlining, and if it’s not right you can change it again in a minute.
- Pair from £645.98 inc VAT
- Base mount, 345mm x 271mm, Road and Track
- All heights, 32 to 36 or 36 to 38 inch waist
- Harness slots in the backrest, 4 point compatible, no head support
Product cards show prices excluding VAT. Prices in the text include VAT.
The R100 is the entry point in Sparco’s reclining range: a slim-bolstered, narrow-framed seat on the same 345mm x 271mm base pattern, with a single recline lever. The pair listing says all heights are suitable, and the single seat listing includes drivers over 6ft. Waist sizing covers 32 to 38 inches across its two options, so 34 inches is inside the 32 to 36 band.
Garreth would put it on the list for those slim bolsters, which leave room in a tight cockpit. It takes a standard seat belt and a 4 point harness, but the listing says it isn’t rated for 6 point.
- Pair from £540.00 inc VAT
- Base mount, 345mm x 271mm, Road and Track
- All heights, 32 to 36 or 36 to 38 inch waist
- Cloth trim, 4 point compatible, no head support
The frame and runner that go under the seats
The Sparco Seat Leon Mk3 frame is steel and presents the 345mm x 271mm pattern on the car’s own floor mounting points. It takes Sparco, OMP and Corbeau base mount seats. It’s sold singly and handed, so pick RHD driver or RHD passenger and order twice for a pair.
Cameron’s advice is to expect one bolt point that needs a little persuading. Sparco and others build to a tolerance of plus or minus 10mm (our bolt point tolerance guide explains it), and extending a hole is normal and adds about five minutes.
- From £93.60 inc VAT, sold one per seat
- Steel, base mount, 345mm x 271mm
- RHD driver side or RHD passenger side
- Takes Sparco, OMP and Corbeau base mount seats
-
From £93.60 Incl. VATFrom £78.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
The twin kit covers driver and passenger in one order. The runners bolt to the underside of a base mount seat and let it slide fore and aft on the frame. They aren’t car specific, so they suit any base mount seat on the 345mm x 271mm pattern, the R100 and R500 included.
At 6ft 6 this is where your leg room comes from. Garreth’s view is that a tall driver wants one, so you can slide back for your legs and forward again for the next person who drives it. The runner does add a layer between seat and frame, though, and that layer counts against your headroom.
- Twin kit from £78.00 inc VAT
- Steel, 345mm x 271mm, not car specific
- For road and track days, not FIA approved for competition
How to keep headroom at 6ft 6
Headroom in this car comes from three things stacked together: the frame, the runner and the angle of the backrest. The Sparco runner listing doesn’t give a stack height, so we won’t guess one. What counts is the Mk3 headlining and your sitting height, and you can only get those from your own car.
Sit in the driving position you want, with your helmet on if you wear one on track, and measure from the seat base up to the top of your head. Then measure the gap between the factory cushion and the headlining. Send us those two numbers and Cameron will tell you how much room the frame, runner and seat leave you.
The frame
The frame replaces the factory runners and sets where the seat base sits on the floor, so it is the first layer of your headroom.
The runner
The runner bolts under the seat and sits on the frame. If headroom's tight, the seat can go straight on the frame with no runner. You lose the fore and aft adjustment that way, so check your leg room first.
The backrest angle
Both seats recline, and the R500 has fine adjustment, so tilting the back a little further moves your head away from the headlining without moving the base.
If you plan to add a roll cage later, tell us first, because a cage changes the space overhead too. Stuck on the numbers? Drop us an email or click to open a chat. We will work through them with you.
If you want a fixed back bucket seat
A side mount bucket seat needs side mounts or adaption bars before it meets a base mount frame. The M2 Seat Leon Mk3 5F frame at £166.20 comes with its own side mounts and 290mm side mount holes, so a side mount seat bolts straight to it. Ask us about runners on that route before you order, because the listing does not describe one.
The Sparco Sprint L pair is the big and tall FIA seat in our range at £556.80. The listing cuts it for a 40 to 42 inch waist, so a 34 inch waist would have space to spare in it. It mounts on the base or on the sides, and we would confirm its pattern against the frame before you order.
Common questions
Will a 34 inch waist fit the R100 or R500?
Both listings give the waist as 32 to 36 or 36 to 38 inches, so 34 inches falls in the first band, and telling us your waist when you order means we pair it with the right option.
Do I need side mounts with these seats?
No. The R100 and R500 are base mount seats on the 345mm x 271mm pattern. They bolt to the Sparco frame directly or to the runner that sits on it.
Do I order one frame or two?
Two, because the Sparco Leon Mk3 frame is sold singly and handed, one for the driver side and one for the passenger side.
Do the Sparco runners fit the R100 and R500 and the frame?
The runner kit is 345mm x 271mm and not car specific. The listing says it bolts straight to the underside of base mount Sparco seats such as the R100. The R500 uses the same pattern.
Can I keep a standard seat belt?
Yes, the R100 listing says it works with a standard seat belt and with a 4 point harness, and the R500 listing says its backrest slots take a race harness as well as the standard belt.
Is there a taller backed seat than these?
The Cobra Roadster XL is listed at 580mm tall, 525mm wide and 600mm deep, from £309.00. It is a fixed back base mount seat on a 291mm x 330mm pattern, which differs from the Sparco frame, so we would match a frame to it. The listing says to tell us if you are long in the leg.
What we would buy
Garreth
Garreth's top tip
For a 6ft 6 driver in a Leon Mk3 I'd take the R500 pair on the two Sparco frames with the twin runner kit, which comes to £911.18 in parts. That fine backrest adjustment is how you'll find your headroom.
If you'd rather have the R100, the same frames and runners go under it for £805.20 in parts, and it's a good seat with a simpler recline.
Cameron
Cameron's fitting view
On your Leon I'd want the stack first: frame, runner and seat base added up against the gap to your headlining. Send me your sitting height, plus your helmet measurement if you track the car, and I'll tell you what the Leon leaves you.
Both seats and the runner share the 345mm x 271mm pattern, so the Sparco frame is a straightforward fit, and one bolt point that needs extending is normal.
Want the stack checked for your Leon?
Tell us your height, your sitting height and whether you wear a helmet. Cally, our digital receptionist, takes your details, and Cameron comes back with the frame and runner that fit before you order.


