Will Corbeau PSR Seats Fit Sparco Sliders And Frames? Bolt Patterns Explained
A customer asked which bolt pattern on a Corbeau PSR matches Sparco sliders, and whether anything extra is needed to fit them. The PSR is drilled for two patterns, and the one Sparco use is 345mm across by 271mm front to back. If your Sparco sliders or frame are built to that pattern, the seat bolts on with no adapter. The parts that can still come into it are runners, fixings and, for wide sliders, adapter bars.
- Prices read from the live site, inc VAT
- Bolt patterns taken from the product listings for the PSR, the Sparco frames and the Sparco runners
- Where a listing does not say, we say so and ask you to check with us

Use the 345mm x 271mm holes on the PSR
£598.80inc VAT
The PSR listing gives two fixing bolt patterns, 291mm x 330mm and 345mm x 271mm. The Sparco runner and frame listings we checked are all 345mm x 271mm.
- The PSR is drilled for both 291mm x 330mm and 345mm x 271mm
- Sparco base mount sliders and frames use 345mm x 271mm
- On that pattern the seat bolts to the Sparco part with no adapter
- Add runners if your frame has none, and adapter bars only if your sliders are 405mm wide
The two bolt patterns on a Corbeau PSR
The base of a PSR has eight holes. Corbeau drill it for two base patterns, and either set will take a runner or frame built to match. Our PSR listing gives them as 291mm x 330mm and 345mm x 271mm.
The first number is across the seat and the second is front to back. People quote the same set in either order, which is how a customer ends up writing 330 x 290 for the narrow set. If you are comparing numbers with a slider listing, check which way round they are before you decide they differ.
| Pattern | Across the seat | Front to back | Where it is used |
|---|---|---|---|
| Narrow set | 291mm | 330mm | Corbeau Sportline and Cobra base mount runners |
| Wide set | 345mm | 271mm | Sparco base mount runners and frames |
Corbeau list their 291mm runner handle for the Sportline and Classic seat range, and the 345mm handle for standard width base mount seats, including Corbeau, Sparco and OMP.
The PSR is a base mount recliner sold as a pair, with the seat only and no brackets. The listing gives both fixing bolt patterns, so you don’t have to order a Sparco version or a Corbeau version. It’s reclining, in black cloth, with no head support.
Go by the part under the seat: whichever slider or frame you’re bolting to decides which of the two sets you use, and the other set stays empty.
- £598.80 inc VAT for the pair
- Base mount, seat only
- Fixing bolt pattern: 291mm x 330mm or 345mm x 271mm
- Black cloth, reclining
Product cards show prices excluding VAT. Prices in the text include VAT.
What Sparco sliders and frames are built to
Both Sparco runner listings give a base bolt pattern of 345mm x 271mm. They say the runners suit base mount seats on that platform, and name Corbeau base mount reclining and bucket seats alongside Sparco and OMP. The Sparco frames we looked at carry the same pattern, with Corbeau base mount seats in their compatible seats list. That is true of the Sparco Fiesta Mk6/Mk7 frames and of the Golf Mk5 frame.
So the match is the wide set on the PSR, and for most Sparco parts it really is that simple. Where it can catch you out is a slider that isn’t a standard Sparco base mount runner. Older runners, second hand ones and some car specific sliders can be built differently, and only the holes will settle it.
Put a tape across the top of the slider. 345mm across and 271mm front to back means the PSR sits straight on.
If you are not sure what is under your seats, drop us an email or click to open a chat with a photo of the sliders and the part number if you can see one, and we will confirm the pattern before you buy anything.
Do you need any extra parts?
Not for the match itself. If the sliders are 345mm x 271mm, nothing sits between them and the PSR. What you might still need depends on what you’ve already got.
Most people who ask this only end up needing the runners, so check that before you put adapters in the basket.
Runners, if your frame has none
The Sparco frame listings say you need Sparco runners between the frame and the seat if you want fore and aft adjustment, otherwise the seat is fixed where the frame puts it.
Adapter bars, only for wide sliders
If your sliders are built to a 405mm pattern, a pair of adapter bars across them brings the seat down to 345mm or 291mm. Sparco 345mm runners do not need them.
Fixings, ask us
The listings we read don't say whether bolts come in the box, so tell us the frame, the sliders and the seat and we'll confirm what the stack needs.
Which runner to put under a PSR
There are three runner families we list that suit the 345mm x 271mm pattern. The Sparco Seat Sliding Runner Kit is £41.94 and fits one seat, and the 2 Sparco Seat Sliding Runner Kit is £78.00 for a pair. The Sparco listing describes them as non-FIA steel runners that suit road use and track days.
The Endurance Sparco Compatible Premium Track Day Runner is £90.00 and is built around the same 345mm spacing. Its listing calls the rail construction heavier duty than the standard Endurance runner. It says the runner is meant for track day use and for the repeated loading of circuit driving.
Corbeau’s own sliding runners start at £58.80 and come in four handle widths, so choose the 345mm Motorsport STD one for this pattern. Corbeau say they cannot guarantee fitment when their runners are used with seats from other manufacturers, which matters if the frame under them is Sparco. Ask us if you are mixing the two.
| Runner | Price inc VAT | What the listing says |
|---|---|---|
| Sparco Seat Sliding Runner Kit | £41.94 | One seat, bolts to the 345mm x 271mm pattern, non-FIA steel |
| 2 Sparco Seat Sliding Runner Kit | £78.00 | Same specification, covers both seats |
| Endurance Sparco Compatible Premium Track Day Runner | £90.00 | Built around Sparco 345mm spacing, heavier duty rails |
| Corbeau Seat Sliding Runners, 345mm handle | From £58.80 | Standard width base mount seats |
Prices were read from the live site and include VAT.
If your sliders are 405mm wide
Some frames and sliders are built wider than a PSR. The Endurance adapter bars bolt across the top of a pair of 405mm sliders and carry the seat at 345mm or 291mm, so a wide frame can take a narrower seat.
We have used the same stack on other cars. Our VW Up guide shows the full order of parts from the floor up. The bars add a little height under the seat, so tell us your height if the roof is low.
- £47.40 inc VAT, a pair
- One pair does one seat
- Bolt down at 405mm, seat at 345mm or 291mm
- Adds a little height under the seat
For a PSR on those bars, Cameron’s fitting view is the 345mm holes if the rest of the build is Sparco, and the 291mm holes if it’s Cobra or Corbeau Sportline. Either way, we’d check the bars against your exact sliders first. Our Evo VI PSR guide and our MX-5 Mk1 PSR guide cover two cars where the same seat meets a different mount.
Common questions
Which PSR bolt pattern matches Sparco sliders?
The 345mm x 271mm set. The PSR listing gives both patterns, and every Sparco runner and frame listing we checked uses 345mm x 271mm, so that is the set that lines up.
Do I need adapter plates to fit a PSR to Sparco runners?
Not on the standard 345mm x 271mm pattern, because adapter bars are only for sliders built to 405mm.
Can I use the 291mm x 330mm holes with Sparco parts?
Those holes suit Corbeau Sportline and Cobra base mount runners. A Sparco 345mm runner will not line up with them, so use the other set on the seat.
Do Sparco frames come with runners?
The frame listings we read say you add Sparco runners if you want fore and aft adjustment. Without them the seat stays fixed where the frame sets it. The Fiesta Mk6/Mk7 pair is one example.
How do I measure the holes?
Measure centre to centre across the slider and then front to back, and check which number is which before you compare it with a listing, as people quote the pair in either order.
Does the PSR need side mounts?
No, because the PSR is a base mount seat sold as seat only, so it needs something flat to sit on, such as a runner or a frame.
Do the runner and frame listings say whether bolts are supplied?
The listings we read don’t say, so tell us the frame, the runners and the seat and we’ll confirm what’s in the kit before you order.
What we would buy
Garreth
Garreth's top tip
If you're starting from nothing, I'd put the 345mm x 271mm Sparco runners under the PSR. At £78.00 for the pair they're the plain answer, and the seat bolts straight to them without an adapter. If the car sees a lot of track days, I'd look at the Endurance runner at £90.00 for the heavier rails.
I wouldn't buy adapter bars unless the sliders are wide.
Cameron
Cameron's fitting view
Measure the sliders you've already got first. If they read 345mm by 271mm, the PSR goes straight on and you may not need to buy a thing.
On the Endurance runner: the extra is worth paying if the seat's going to work hard. For a car that's out every weekend, Garreth's tip is to just buy it.
Not sure which pattern your sliders are?
Tell us the sliders or frame you've got and the PSR you're after. Cally, our digital receptionist, takes your details, and Cameron comes back to you with the right combination before you order.


