Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Top 5 reclining seat choices for your Skoda Octavia Mk1, including our fitting guide

When an Octavia Mk1 owner rings us, the first question is usually whether a sport seat can add support without turning a useful road car into a chore. That is exactly where a reclining seat makes sense. The original seats are often tired now, especially at the driver’s outer bolster, but most owners still need easy access, fore-and-aft adjustment and a backrest that works on a long journey.

Cameron and I would normally build the shortlist around how the car is used. The Corbeau PSR is the value choice for a daily-driven car, the Cobra Daytona is the straightforward made-to-order upgrade, and the RRS earns its place when the Octavia sees more track use. All five choices below use the same 291mm route onto the Cobra Mk1 subframe, which includes its sliding runner. The subframe price is per seating position, so allow for two if you are fitting a pair.

  • One Cobra direct-fit subframe for the Octavia Mk1 (part 14497, £231.66 inc VAT a side)
  • Runner included in the frame price, no separate purchase needed
  • All five seats in this guide are 4 point harness compatible
  • No drilling on a standard floor
Helmeted driver in a Skoda Octavia Mk1 fitted with black Corbeau PSR reclining sport seats
A pair of Corbeau PSR reclining sport seats fitted in a Skoda Octavia Mk1. This is the practical starting point for a road car that still needs proper support.

The frame route into an Octavia Mk1

For the five seats in this guide, we use the Cobra direct-fit subframe for the Octavia Mk1. It picks up the factory floor mounting points and includes the sliding runner, so there is no separate runner to add to the order. The price is per side: order one frame for the driver or two for a matching pair.

Cobra recliners use the 291mm x 330mm pattern. The Corbeau PSR and Sportline RRS listings include both 291mm x 330mm and 345mm x 271mm patterns, so we use their 291mm mounting points with this frame. Tell us the exact seat and side when ordering; that gives Cameron the chance to check the combination before it leaves us.

291

Cobra direct-fit subframe

Part 14497, £231.66 inc VAT a side. Runner included. Suits all five seats in this guide. Tell Cobra your seat at checkout and they will confirm the complete kit.

The number that decides it

Every reclining seat in this guide is a base mount, and on the Octavia Mk1 there is one bolt spacing in play. The Cobra subframe is built around 291mm x 330mm. Cobra recliners use that pattern exactly. Corbeau recliners are drilled for both 291mm and 345mm, which means they bolt straight to the Cobra subframe at the 291mm side. Sparco and Auto Style seats use different patterns and there is no Sparco subframe or Planted bracket for this car, so they are not in this guide.

SeatBolt patternCobra subframe
Corbeau PSR291 or 345Fits
Cobra Daytona291 x 330Fits
Cobra Le Mans Heritage291 x 330Fits
Corbeau Sportline RRS291 or 345Fits
Cobra Misano Anniversary291 x 330Fits
Runner includedThe Cobra subframe for the Octavia Mk1 comes with the sliding runner. It handles the 291mm pattern that every seat in this guide uses. No second purchase needed.

Corbeau PSR: the practical starting point

The PSR is where we would start for a Mk1 that still does commuting, motorway mileage and occasional track days. Its black cloth trim is comfortable for longer journeys, while the shoulder and thigh bolsters give much more support than a tired factory seat without making the car awkward to get in and out of.

It is sold as a pair and is drilled for both 291mm x 330mm and 345mm x 271mm patterns. Heated pads, inflatable lumbar support and double-locking runners are available options on the seat listing. For this Octavia installation, however, the Cobra vehicle subframe already includes its own sliding runner, so speak to us before adding any extra runner option. The current fit data covers a 32in-38in waist and all driver heights.

  • £558 inc VAT a pair
  • Cloth trim; heated seats and inflatable lumbar available at order
  • 32 to 38in waist, all heights
  • 4 point harness compatible
  • Drilled for 291mm and 345mm patterns

Cobra Daytona: the Cobra starting point

The Daytona is Cobra’s standard reclining seat and the one most 1.8T Octavia owners end up choosing when they want the Cobra build quality without a long wait. The backrest is 865mm tall and 580mm at the shoulder, giving it enough presence to fill the cabin properly, and the side bolsters are a meaningful step up from the PSR. It is a steel-framed seat at 13.5kg, built to order in the standard Cobra Signature programme: spacer fabric, vinyl or leather in any colour, with heated seat and lumbar as factory options.

Priced per seat rather than as a pair, so factor in two if you are doing both positions. Goes straight to the Cobra 291mm pattern, same subframe as the PSR above.

  • £599 inc VAT per seat (order two for driver and passenger)
  • Built to order: spacer fabric, vinyl or leather trim
  • 32 to 38in waist, all heights, 13.5kg
  • 4 point harness compatible
  • 291mm x 330mm pattern, Cobra subframe only

Cobra Le Mans Heritage: the step-up with character

The Le Mans Heritage is where the Cobra range develops a proper look as well as a function. The trim options extend to houndstooth, corduroy and basketweave inserts alongside the standard vinyl and leather choices, so the seat can match a considered interior build rather than just sitting in a plain cabin. It is slightly narrower than the Daytona at 540mm wide versus 580mm, which can make a practical difference on a car where the door cards are closer than they look. No head support as standard, same as the Daytona.

Made to order with a four to six week lead time from Cobra. If you have a clear idea of what you want the interior to look like and you are not pressed for time, this is the Cobra seat to specify. Priced per seat. 291mm x 330mm pattern, same subframe route as the Daytona.

  • £649 inc VAT per seat, 4 to 6 week lead time
  • Trim options: houndstooth, corduroy, basketweave, vinyl, leather
  • 32 to 38in waist, all heights, 13.4kg
  • Without head support as standard
  • 291mm x 330mm pattern, Cobra subframe only

Corbeau Sportline RRS: for the Octavia that gets used hard

The RRS is the Corbeau seat when more bolstering is the priority. The shoulder and thigh hold is noticeably firmer than the PSR, which suits a track day car or an Octavia that gets pressed into a corner rather than just tidily driven through one. Sold as a pair in the standard RRS finish. Corbeau will quote alternative trim on request if the standard upholstery is not right for your build. 32 to 38 inch waist, all heights.

Dual-drilled at 291mm and 345mm, same Cobra subframe route as the PSR and Daytona. If the car is doing regular circuits and you want both seats working properly under cornering loads rather than one seat doing the job and the passenger’s seat remaining unchanged, the RRS is the pair that makes sense.

  • £984 inc VAT a pair (£492 each)
  • Firmer bolsters at shoulder and thigh than the PSR
  • Sold as a pair; custom trim available on request
  • 32 to 38in waist, all heights
  • 4 point harness compatible, drilled for 291mm and 345mm patterns

Cobra Misano Anniversary: the top pick

The Misano Anniversary is the seat at the top of the Cobra reclining range, and the difference between it and the Daytona is apparent once it is in the car. The shell has a fibreglass backing rather than an all-steel frame, which brings the weight down to 11.5kg and changes how the upper backrest behaves on a longer run. The full Cobra Signature trim programme applies, with heating and lumbar as factory options, and the finish is a step above the rest of the range.

Four to six weeks from order, priced per seat. If this is the build where the 1.8T gets the interior it deserves and you are not cutting corners, this is where to spend the seat budget. 32 to 38 inch waist, all heights. Same 291mm pattern, same Cobra subframe as the Daytona and Le Mans.

  • £1,649 inc VAT per seat, 4 to 6 week lead time
  • Fibreglass-backed shell, full Cobra Signature trim programme
  • 32 to 38in waist, all heights, 11.5kg
  • Heated seats and lumbar support available
  • 291mm x 330mm pattern, Cobra subframe only

Getting it bolted down

All five seats follow the same basic route in this guide: Cobra frame 14497, with its 291mm sliding runner included, bolted to the Mk1’s factory floor points. Use the correct vehicle fasteners and the torque settings in the workshop information for your car. Before final tightening, check that the runner locks on both sides, the backrest adjusts freely and the seat-belt buckle sits where it can be reached without rubbing the seat.

Many Mk1 cars have wiring under the original front seat for equipment such as a side airbag or belt warning. Check what your car actually has before unplugging anything, isolate the battery where the workshop procedure requires it, and do not switch the ignition on with a safety-restraint circuit disconnected. If you are not comfortable dealing with the wiring or seat-belt mounting, have the installation completed by a competent fitter.

The Octavia Mk1 ran alongside the arrival of the Mk2 in 2004. If yours is a late car, confirm the generation from the VIN or production information before ordering. The Mk2 uses a different frame, part 14498.

Your seatRunners to orderWorks on
Corbeau PSRRunner included with frame 14497Cobra Octavia Mk1 subframe
Cobra DaytonaRunner included with frame 14497Cobra Octavia Mk1 subframe
Cobra Le Mans HeritageRunner included with frame 14497Cobra Octavia Mk1 subframe
Corbeau Sportline RRSRunner included with frame 14497Cobra Octavia Mk1 subframe
Cobra Misano AnniversaryRunner included with frame 14497Cobra Octavia Mk1 subframe

The five compared

SeatBolt patternWaistHeightWeightPrice inc VAT
Corbeau PSR291 or 34532 to 38inAll heightsNot published£558 a pair
Cobra Daytona291 x 33032 to 38inAll heights13.5kg£599 per seat
Cobra Le Mans Heritage291 x 33032 to 38inAll heights13.4kg£649 per seat
Corbeau Sportline RRS291 or 34532 to 38inAll heightsNot published£984 a pair
Cobra Misano Anniversary291 x 33032 to 38inAll heights11.5kg£1,649 per seat

Prices include VAT and were checked against the live product listings on 25 September 2026. A pair price and a single-seat price are not directly comparable, so the table states which you are looking at. Waist and height bands are the manufacturers’ current guidance; if you are at either edge, come to the showroom or talk the fit through with us before ordering.

Common questions

Do I need to drill the floor of my Octavia Mk1?

No. The Cobra subframe bolts to the factory seat mounting points in the Mk1 floor. No drilling, no cutting. Torque the floor bolts properly and check seat belt buckle clearance before you drive.

Does the Cobra subframe come with a sliding runner?

Yes. Frame 14497 includes the sliding runner in the price. It handles the 291mm bolt pattern that every seat in this guide uses, so there is nothing extra to source or price up.

What is the difference between the three Cobra seats in this guide?

The Daytona is the standard Cobra recliner, available to a quicker lead time in the core trim options. The Le Mans Heritage adds more trim choices including houndstooth and corduroy inserts and is slightly narrower in the shell. The Misano Anniversary is the flagship: a fibreglass-backed shell that is lighter and better finished than the other two, with the same four to six week lead time as the Le Mans. All three use the 291mm pattern and the same Cobra subframe.

My Octavia is the estate. Does the same frame fit?

The Mk1 Octavia came as both a hatchback and a Combi estate, and the front seat floor mounting points are the same across both body styles. Frame 14497 is listed for the Mk1 without a body-style restriction, which is consistent with what we have seen in practice. If you have any doubt about your specific car, ring us and we will confirm before you order.

Will these seats take a 4 point harness?

Every seat in this guide is listed by its manufacturer as 4 point compatible, with belt slots in the backrest. We also stock Schroth QuickFit ASM harness belts listed specifically for the Mk1 Octavia. If you are planning harnesses alongside new seats, let us know when you enquire and we will confirm the full setup works together on your car.

What I would actually buy

For a road Octavia on a sensible budget, Cameron and I would begin with the Corbeau PSR pair on the Cobra frames. At £558 including VAT for both seats, it improves the cabin without spending more on trim than the car needs. If you want one made-to-order seat first, the Cobra Daytona at £599 including VAT is the straightforward next step.

The Le Mans Heritage suits an interior-led build. Houndstooth, corduroy and basketweave can look right in an older car when the rest of the trim has been planned around them, and its 540mm published width is useful when cabin clearance matters. Allow the quoted four to six weeks because Cobra makes it to order.

For an Octavia used regularly on circuit, we would move to the Corbeau Sportline RRS pair. The stronger shoulder and thigh support is the reason to spend the extra money. At the other end of the range, the Misano Anniversary is the choice when finish and specification matter more than budget.

Bring us the driver’s measurements, the car’s year and a few photographs of the current seat and floor area. We can then check the seat, frame, runner and belt-buckle route as one installation. Call 0115 647 8650 if you want Cameron or Garreth to work through it with you.

Got a question about the equipment we sell?

Ask us anything. If it helps other drivers, we’ll turn your question into a full blog guide and share the answer on our site.

Why Choose Garreth And Cameron At GSM Performance?

Garreth and Cameron answer these fitment questions from the showroom every week. We compare the driver, the car, the way it will be used and the mounting parts before recommending a seat, because a good-looking seat is no use if it leaves the driver uncomfortable or the installation incomplete.

Our showroom virtual walk through!
Have a walk around our showroom before you even buy your new seats. 
Our hands on experience, is what allows us to bring you our recommendations.

Need a personal recommendation?

We're here to ensure you pick the right seat. Contact us today.
Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text