The Steel Rally 3×2 is a 6-point saloon and rally harness with 3 inch shoulder straps, 2 inch lap straps and Sabelt’s Steel series hardware.
Specification
- 3 inch shoulder straps, 2 inch lap straps
- Sabelt B2 patented aluminium buckle with the crotch straps attached to it (219 g)
- A5 super strong steel adjusters for 3 inch webbing (147 g each)
- A3 superfast pull-down adjuster built into the lap tongue (123 g)
- Snap hook end fittings throughout
- Eye bolts included
- FIA 8853-2016, homologation SH.031.17-T-6
Standard lengths
Sabelt standard measures in mm, lettered as on Sabelt’s drawing in the gallery: A 380, B 1700, C 680, D 850.
Sabelt part numbers
- Red: CFCI4335S632SD2F
- Black: CFCI2335S632SD2F
- Blue: CFCI1335S632SD2F
HANS and FHR
The 3 inch shoulder straps can be worn with or without a HANS device.
Choose red, black or blue above.
How long does an FIA harness last?
Every FIA harness carries a not-valid-after date on its label, and that date is what counts, not the purchase date. Our guide on how long FIA harnesses last explains the labelling, and buying new gets you the freshest date Sabelt currently produces.
Does it work with a HANS device?
Yes. This is a 6-point FIA harness with 3 inch shoulder straps, which can be worn with or without a HANS device. Some drivers with a HANS prefer 2 inch shoulders for the fit on the yoke, and our guide on 3 inch versus 2 inch harnesses explains the choice.
How long are the straps?
Sabelt’s standard measures are A 380 mm, B 1700 mm, C 680 mm, D 850 mm, lettered as on the drawing in the product gallery. Measure your seat and anchor points against them, and tell us if anything looks tight before you order.
Which shoulder pads fit?
This harness has 3 inch shoulder straps, so it takes 3 inch pads such as our TRS 3 inch harness shoulder pads. A pad that is narrower or wider than the strap slides or folds.
What are the Sabelt part numbers?
Red is CFCI4335S632SD2F, black is CFCI2335S632SD2F and blue is CFCI1335S632SD2F. Quote the full number if you are matching a harness you already have.
Does it come with eye bolts?
Yes. Eye bolts come with the harness. If your mounting points need backing plates, our TRS back plates are listed separately.
What does it mount to?
A harness needs proper anchor points: a harness bar, cage, or the car’s designed mounting points, plus a seat with the right slots, and as a 6-point it needs each point anchored correctly. Tell us the car and seat and we will confirm the mounting plan before you order.
