Safety Devices MG Roll Cages Updated For 2024
Roll cage news, January 2024
We start 2024 with our Safety Devices MG roll cages brought up to date. The range on our site now takes in both bolt-in and weld-in cages, with new configuration and door bar options on each one and some cages new to the range.
If a full cage is more than the car needs, every bolt-in Safety Devices MG cage we list now has a rear half cage version too, which fits into the back of the car on its own.
- Our Safety Devices MG roll cage range updated for 2024
- Cages for the MG ZR, MGF and MG TF, including hard top versions
- Bolt-in and weld-in cages, with a rear cage version of each bolt-in cage
- Door bar, diagonal and harness bar options on each cage
- Black powder coat as standard, or grey, blue, silver, white or red
- Every listing shows the car, the cage number and its homologation

What is on this page
What has changed on the MG cages
Every Safety Devices MG cage on our site has been checked and rewritten. Each listing now sets out the car it is built for, the Safety Devices cage number, the approval it carries and the options you can choose. The options themselves have grown, with colour, cage configuration and door bars all selectable on the listing.
The configurations cover the usual choices: a single fixed diagonal with a harness bar, or cross diagonals with a harness bar, and on the full cages a choice of door bars on both sides or none. That lets you build the cage around how the car is used.
The cages in the range
For the MG ZR 3-door (2001 to 2005, no sunroof) there is a 6 point bolt-in cage that clears the normal trim and dashboard, with a harness bar in the main hoop and optional single door bars. There is also a rear cage on its own, and a full CDS weld-in cage with cross door bars, tunnel brace and roof diagonal for a serious competition build.
The MGF and MG TF are covered by a 6 point cage for the open top car and a version for the hard top, each with a rear cage option that can be used alone.

-
From £868.80 Incl. VATFrom £724.00 Excl. VATPayPal CreditMade to orderKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £524.40 Incl. VATFrom £437.00 Excl. VATPayPal CreditMade to orderKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £920.40 Incl. VATFrom £767.00 Excl. VATPayPal CreditMade to orderKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
The bolt-in cages come in black powder coat as standard, with grey, blue, silver, white and red also offered, and unpainted by special request. The weld-in ZR cage is supplied unpainted and oiled so it can be finished once it is in the car. You can see every cage together in our Safety Devices MG roll cages section.
Rear cages without the front section
The rear cages are the part of this update most road and track day owners will look at. They bolt into the back of the car behind the seats and do not come with a front cage or door bars, so getting in and out stays as it was. Each one still offers a choice of specification, such as a single fixed diagonal or cross diagonals, each with a harness bar.
Garreth’s advice is to decide how the car will be used before choosing between bolt-in and weld-in, and to check what your championship asks for. Our guides to bolt-in and weld-in cages and roll cage rules go through both.
Harnesses to go with a harness bar
A cage with a harness bar gives you a proper mounting point for the shoulder straps, which is where a multi point harness comes in. These are harnesses we sell in the showroom and online that suit a cage with a harness bar fitted.
-
From £444.01 Incl. VATFrom £370.01 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £294.00 Incl. VATFrom £245.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £246.00 Incl. VATFrom £205.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £324.00 Incl. VATFrom £270.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Which MG models do the Safety Devices cages cover?
Our range covers the MG ZR 3-door, and the MGF and MG TF in open top and hard top form.
Is there a half cage for the MG ZR?
Yes. The ZR bolt-in cage has a rear cage version that can be used on its own, without a front cage or door bars.
What colours are the Safety Devices MG cages?
Black powder coat as standard, with grey, blue, silver, white and red offered, and unpainted by special request.
Are the MG cages bolt-in or weld-in?
Both. Most are bolt-in, and there is a full CDS weld-in cage for the MG ZR.
💬
Ready for 2024Safety Devices cages for the MG ZR, MGF and TF
Bolt-in and weld-in cages, rear cage versions and door bar options, in six colours.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.






