A PCI Racing adjustable seat mount for the Honda Integra, 1989 to 1991. Part number SM-DA-A1.
DA is the chassis code for that generation of Integra, and it is a narrow year window. The DC2 that followed takes a different mount, so check the year before you order and send us the registration if you are not certain.
The low option
PCI’s adjustable mount gives the largest range of adjustment and the lowest possible seat fitment in their range. On a light car of this age, where the standard seating position is high and everything you add to the car matters, that is the right choice.
No slider. The seat is set at installation, though the hardware interlocks into the slots in the seat base and the position can be changed later with one tool without taking the mount out of the car.
Check the floor first
On a car this old that is the honest first job. A mount works by feeding seat load into the factory mounting points, and it can only do that if the metal round them is sound. Lift the carpet before you spend anything.
Construction
Laser cut and CNC formed from one piece of 1/8 inch carbon steel, gloss black powder coat, grade 10.9 8mm hardware, five and six point sub belt mounting locations built in.
Side mount, handed, order twice for a pair.
Have you written anything about this exact product?
Yes, we have covered this exact product: Which Top 5 Bucket Seats Do We Recommend For Your Honda Integra DC5?, and Honda Integra Type R DC5 Recaro Seat Fitment. That is first-hand coverage from our own builds and showroom, not brochure copy.
Will this fit my car?
This frame is car-specific, so match the vehicle in the product name to your exact car and generation. If you are unsure, send us the registration and we will confirm before you order.
Which seats does it take?
Check the bolt pattern in the specification against your seat. The Compatible seats tab above lists what bolts straight on. If your seat is not listed, tell us what you run and we will confirm the fit.
Do I keep fore-and-aft adjustment?
Only with a sliding runner between the frame and the seat, which is a separate part on PCI frames. If more than one person drives the car, budget for the runner. Our guide to sliding runners explains the options and widths.
Base mount or side mount, and does it matter?
This is a side-mount frame: the seat hangs between side brackets bolted through its flanks, the motorsport-style stack that gives fine height and angle control. Our guide on base mount versus side mount explains the whole fitting stack.
Is this for the driver or passenger side?
Both sides are available on this listing, pick driver or passenger side at the point of order (sides listed are for right-hand-drive cars). Left-hand-drive car? Ask us, as the sides swap over and availability varies by model.
