Two Recaro direct fit sub-frames for the Audi A6 from 1997, 480 for the pair, one for each side.
What the frame does
Nothing gets drilled. The factory seat bolts hold it, and it sets how low a Recaro seat sits in this car.
The car
Two frames for the C5 A6, the 1997 to 2004 car, one per side, listed as a pair at 480. Anyone putting Recaros in an A6 of this age is usually doing both seats, and this is the listing for that.
The mounts in between
Recaro shells mount on Recaro side mounts, and this frame carries those mounts. Recaro homologate seat and side mounts together as one system, and the mounts are a separate part.
Send the registration and the seat model and we will confirm the whole fitting before you order.
Have you written anything about this exact product?
Yes, we have covered this exact product: Top 5 reclining seat choices for your Audi A6 (97 Onwards), including our fitting guide. That is first-hand coverage from our own builds and showroom, not brochure copy.
Will this fit my car?
This frame is car-specific, so match the vehicle in the product name to your exact car and generation. If you are unsure, send us the registration and we will confirm before you order.
Which seats does it take?
Check the bolt pattern in the specification against your seat. The Compatible seats tab above lists what bolts straight on. If your seat is not listed, tell us what you run and we will confirm the fit.
Do I keep fore-and-aft adjustment?
Only with a sliding runner between the frame and the seat, which is a separate part on Recaro frames. If more than one person drives the car, budget for the runner. Our guide to sliding runners explains the options and widths.
Is this for the driver or passenger side?
Both sides are available on this listing, pick driver or passenger side at the point of order (sides listed are for right-hand-drive cars). Left-hand-drive car? Ask us, as the sides swap over and availability varies by model.
