Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Fiat Bravo Mk1 Bucket Seat Guide

Choose the seat and fitting route for your three-door Bravo

For a first-generation Bravo, start with the seat shape and the complete mounting arrangement. The original type 182 is a three-door hatchback, so include rear-seat access in the decision. We list a Sparco base and a separate Recaro kit with manufacturer applications for this earlier car.

Garreth would try the support and normal entry before choosing the covering. Cameron would match the exact seat, runner and vehicle fittings, then trial the driving position. The later Bravo is a separate application check, even when a product title uses the same model name.

Front three-quarter view of an illustrative modified red first-generation Fiat Bravo three-door with white motorsport wheels, black racing bucket seats and blue harnesses visible through the windscreen
Illustrative modified first-generation Fiat Bravo, not a customer installation.

At a glance

  • Vehicle scope: first-generation Fiat Bravo type 182 three-door; check the actual year and physical seating side.
  • Sparco base 00499010: manufacturer application August 1995 to August 2001, with runner 00493 and 345mm x 271mm seat-side centres.
  • Our Recaro kit 862116 corresponds to the Bravo’s 86.21.16/-26 application, with seat-family-specific conditions.
  • The cited Recaro Sportster application permits replacement of one front seat only, either driver or passenger.
  • Cobra listing COBEQYRP327 needs its exact Bravo generation confirmed before it forms a recommended assembly.

Sparco 00499010 for the original Bravo

Our Bravo base carries reference 00499010. Sparco’s own vehicle table lists Bravo type 182 with that base, dates August 1995 to August 2001, and runner 00493. Those are the application details used for this route.

Check the supplied physical side and manufacturer reference against the car. Photograph the existing mounts and any earlier adaptors before ordering. A shared base code with Brava or Marea does not remove the need to identify the Bravo’s own application.

Cameron would put the seat, runner and base on one parts list. Confirm the current instructions and fasteners for each connection. Trial the complete assembly before judging control reach or cushion height.

Confirm the generation for the Cobra listing

We also list a Cobra frame under Fiat Bravo, reference COBEQYRP327. The current description asks for the vehicle year because the generation needs confirming. The model name alone does not identify it as a first-generation assembly.

Send the car’s year and the intended Cobra seat with that enquiry. Cameron would confirm the exact vehicle application, lower connection and supplied runner before recommending the combination. Keep this check separate from the identified Sparco and Recaro applications.

Specify the 00493 runner named by Sparco

Sparco’s vehicle table names runner 00493 for this application. The current runner card shown here carries 0049306, listed separately as Slide Runners KR in the 2025 catalogue. Both catalogue entries give 271mm longitudinal spacing, but they remain separate references.

Cameron would confirm the required current runner and its connection to the vehicle base before completing the order. A shared measurement alone does not establish the full assembly or handle position. Keep the seat, base and runner references together on the enquiry.

Trial the release and locking action with the driver seated. Check that both rails operate together and move through the range you need. Include the runner and all lower fittings when judging the finished cushion position.

Compare Sprint, Sprint Sky and Sprint L

The Sprint is a tubular-frame fixed-back seat to try for its cushion and backrest support. Sprint Sky offers a different upholstery surface, while Sprint L is the larger version. Garreth would sit in the intended size before choosing the finish.

Sparco’s 2025 catalogue identifies lower mounting at 271mm x 345mm and 290mm lateral fixing spacing for the illustrated Sprint and Sprint Sky models. Confirm the exact supplied version and its instructions. Choose the base-mounted or side-mounted arrangement before ordering the parts beneath the cushion.

R100, R100 vinyl and R333 reclining choices

The R100 fabric and vinyl versions give two finishes of the reclining seat to compare. The R333 has a different bolster and cushion shape to try. Garreth would judge support and getting over the side bolster before settling on upholstery.

Sparco’s catalogue gives the R100 family and R333 271mm x 345mm lower fixings. Match the exact supplied seat and its instructions to the complete lower assembly. Those centres establish one mounting connection without promising cabin clearance or an installed height.

Move the backrest through the range you need and check that its controls stay reachable. Trial the driver’s wheel and pedal reach with the seat in position. Keep any rear-seat access you want in the same check.

Plan the connection for a side-mounted shell

The Sparco steel side mounts shown here are an option to discuss for a seat using lateral fixings. They connect the shell to the lower assembly. Confirm the support reference, hole positions and connection beneath it against the exact seat instructions.

A seat using its lower fixing points does not automatically need side mounts as well. Cameron would identify each connection before completing the parts list. A different competition shell can require its own specific supports.

The 345mm x 271mm seat-side centres

Sparco’s application table gives 345mm x 271mm for the seat-side mounting reference. Its seat catalogue gives the same lower-fixing dimensions for the illustrated Sprint, R100 and R333 families. The diagram draws those centres at one scale.

The outer frame outline is schematic. It gives neither the Bravo floor-hole pattern nor the outside width of a seat. Check the exact seat, controls and lower fittings separately when measuring cabin clearance and the finished driving position.

Seat-side bolt centres 345 by 271 millimetres, drawn to scale345mm across271mm front to rearSeat-side bolt centres; outer frame outline is schematic

The Bravo’s Recaro 86.21.16 application

Our combined Bravo/Brava listing carries reference 862116. Recaro’s manufacturer documents identify Bravo type 182 under 86.21.16/-26. Match the actual car, original equipment and exact seat family to the complete application conditions.

The manufacturer’s note 60 permits an optional 20mm raising arrangement. Confirm whether that configuration is appropriate and what the current kit supplies. The application table does not establish an integrated runner or spacer packing list.

Cameron would check each seat-to-car connection before selecting extra rails. Keep the physical seating side and the exact supplied parts on the enquiry. The adjustment and buckle position need checking with the driver in place.

Sportster CS, Speed and Expert S on the Recaro route

The Modular document identifies the Speed and Expert families for the Bravo application. The separate Sportster document identifies Sportster CS with its own conditions. For this Bravo entry, note 1 permits replacement of only one front seat, either driver or passenger.

That Sportster condition needs to be resolved before planning a pair. Garreth would compare its bolster shape with Speed and Expert S during a seat trial. Cameron would check the exact seat version and all application notes against the car.

The reclining-family applications do not establish a Pole Position or another fixed competition shell on this kit. A fixed-back Recaro enquiry needs its own confirmed supports and lower connection. The Sparco choices above use the separately planned Sparco arrangement.

Confirm the runner contents of the Recaro assembly

The Endurance Motorsport Recaro-compatible runner is shown as an adjustment option to discuss if the confirmed assembly needs it. First identify what comes with the actual 86.21.16 kit and exact seat. Another rail set is not automatically added to a complete supplied arrangement.

Cameron would check the seat-to-runner and runner-to-car connections, release handle and any required spacers or adaptors. The application table does not provide a packing list for our kit. Trial the complete assembly before judging cushion position and headroom.

Measure the Expert cushion envelope in the Bravo

Recaro’s Expert S/M drawing gives a maximum cushion envelope of 520mm across by 545mm front to rear, with a maximum backrest height of 820mm. The rectangle below draws that cushion envelope at one scale. Compare it with the available space, then check the moving controls and backrest separately.

The drawing excludes all mounting hardware. It cannot establish the Bravo’s floor pattern or an installed height. Include the runner, vehicle fittings and driver when trialling the finished position.

RECARO Expert S and M maximum cushion envelope, 520mm wide and 545mm deep, drawn to scale520mm maximum cushion width545mm maximum cushion depthExpert S/M cushionPlan envelope, not a seat templateRECARO dimensions exclude all mounting hardware

Choose the belt layout with the seat

The four-point examples and six-point competition option shown here have different strap and attachment layouts. Start with the intended use and the exact seat’s belt openings. A reclining seat and a competition bucket should not be assumed to take the same arrangement.

Cameron would compare the belt maker’s routing instructions with the available attachments and buckle access. Include any rear passengers the car needs to carry. The seat frame does not establish harness attachment points or the complete belt installation.

Trial backrest movement and rear access

A fixed-back shell stays fixed when somebody needs to reach the rear seats. A reclining backrest needs its own movement and release checked in the three-door cabin. Confirm the operation of the exact seat version you intend to buy.

Garreth would try normal entry and any rear-passenger access before deciding on the support shape. Cameron would move the seat and controls through the range needed with the door closed. Include the buckle, trim and existing interior changes in that trial.

Trial the complete driving position in the Bravo

Record the year, body, physical seat position and any previous changes to the mounts. Photograph the existing arrangement before selecting the parts. Use the current instructions supplied with the exact seat and vehicle kit, including the required fasteners at each connection.

With the driver in position, check the wheel, pedals, headroom and buckle access. Operate the adjustment through the range you need and check clearance with the door closed. Garreth would try normal entry and exit; Cameron would repeat the movement and locking checks after tightening.

Common questions

This guide covers the original three-door Bravo type 182. Sparco’s cited application lists August 1995 to August 2001. Confirm the actual year, vehicle details and physical seating side; the later Bravo needs its own verified application.

Sparco’s catalogue lists Bravo type 182 with base 00499010 and runner 00493. Recaro separately identifies 86.21.16/-26 for the relevant seat families. The Cobra listing remains an exact-generation check before recommendation.

The cited Bravo Sportster entry includes note 1, permitting replacement of one front seat only, either driver or passenger. It does not establish a pair under that application. Check the exact vehicle and seat version against the complete manufacturer conditions before planning the arrangement.

The Bravo application names 00493. The current shop card carries 0049306, listed separately as KR in the later Sparco catalogue. Confirm the current required reference and complete connection before ordering.

Confirm the actual supplied package for the exact seat and side. The maker’s application table is not a packing list, and note 60 permits 20mm raising as an option. It does not say a spacer is always required or supplied.

Check the backrest release and movement on the exact seat version in the three-door car. Reclining adjustment alone does not establish the access you need. Trial the complete arrangement with the passengers and interior you intend to keep.

The 345mm x 271mm dimensions describe seat-side mounting centres. They do not give the shell’s outside width or the car’s floor-hole pattern. Measure the exact seat and trial the complete position with the driver.

The cushion, runner and every lower fitting affect the final height. Trial the whole assembly and check headroom and control reach. This guide does not promise a height reduction.

A seat using lateral fixings needs its matching supports and a checked connection to the lower assembly. A seat fitted through lower fixing points is a different arrangement. Confirm the exact seat version and all connections before choosing the extra fittings.

Garreth’s top tip

Garreth would start with the support that feels right and the access the three-door Bravo needs to keep. Try the Sprint and R100 shapes, then compare the Recaro choices if that fitting route suits the car. Choose the covering after the shape and complete arrangement are settled.

Cameron’s fitting view

Cameron would keep 00499010 and the required Sparco runner together on one parts list. For Recaro, he would check the precise seat-family conditions, including the Bravo’s one-front-seat Sportster note. He would resolve the Cobra generation separately and trial the complete position before final tightening.

Plan your Fiat Bravo Mk1 seat change

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text