Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

The New Sparco GT Houndstooth Seat, a Classic Reinvented

In the showroom, May 2025

It is always good to see a new seat come into the showroom, especially one with as much character as the Sparco GT Houndstooth Edition. For the first time we have a pair on display, and they have been getting a lot of attention.

Both seats are out in the seat fitting area to look at, sit in and try. If you have wondered whether a retro-styled seat would suit your car or the way you drive, the best way to find out is to come in and sit in one. You will notice the firm bolsters and the comfortable reclining position straight away.

  • The Sparco GT Houndstooth Edition: black and white houndstooth centres, black vinyl outers
  • Our first pair on display in the showroom, May 2025
  • A steel framed reclining seat, part number 009012NRBI
  • Base mount on a 345mm by 271mm pattern, shared with the R100 and R333
  • Road and track rated, not FIA homologated
  • Sparco's drawing: 500mm at the shoulders, 550mm at the base, 860mm tall
A pair of Sparco GT Houndstooth Edition reclining seats with black and white houndstooth centres and black vinyl outers on the showroom floor
Our pair of Sparco GT Houndstooth Edition seats in the showroom, May 2025.

A new trim for 2025

This edition takes the look of classic car interiors, a bold houndstooth centre against plain black outers, and puts it on a modern Sparco reclining seat. The black and white check has been in fast cars since the sixties, and it looks right in a classic, a restomod, or a road car where the interior is part of the point.

The mix of materials works in use as well as on the eye. The vinyl on the bolsters takes the scuffing from getting in and out, and the cloth stays comfortable where you sit.

A first look: classic meets current

  • Houndstooth cloth centre panels with hard-wearing black vinyl bolsters
  • A separate, adjustable headrest in black vinyl
  • Sparco logo tags on the backrest and the side of the seat
  • Large side bolsters for support in corners
  • A thick, high base cushion for comfort

It suits enthusiasts restoring a classic Porsche or BMW, or anyone who wants an interior that stands out in a modern classic.

Construction and what it is for

Under the retro look, the GT is a current Sparco reclining seat on a steel frame, with firm padding and no armrests or head wings. Sparco list it as suiting all heights and a 32 to 38 inch waist, which is a broader fit than the R333. It takes a four point harness and works with the standard diagonal seatbelt.

Please note: the GT Houndstooth is not FIA homologated, so it is not a seat for competition that requires one. It is rated for road and track, and for fast road and track day cars it gives a good balance of comfort, style and support.

Close up of the black vinyl side of a Sparco GT Houndstooth seat backrest with its adjuster knob and a Sparco tag
The side of the backrest, with its adjuster knob and Sparco tag.

Installation and dimensions

The GT is base mounted on a 345mm by 271mm pattern, the same as the Sparco R100 and R333, so subframes and runners carry across the Sparco reclining range. It comes as the seat only, so each side needs a subframe for your car, plus runners if you want to slide it. Tell us the car and we will match them.

Sparco's drawing gives:

  • Shoulder width: 500mm
  • Base width: 550mm
  • Height: 860mm
  • Depth: 570mm

The base is the widest point, so measure the space between the tunnel and the door at seat height before you order.

Sparco GT dimension drawing showing 500mm shoulder width, 550mm base width, 860mm height and 570mm depth
Sparco's dimension drawing for the GT.

Our Sparco reclining seat range

The GT Houndstooth joins our Sparco recliners on display, including the R100, an affordable and practical seat for everyday cars, and the R333, with sportier bolsters. A reclining seat gives you the adjustment and everyday comfort a fixed back bucket cannot, with enough support for spirited driving, which suits weekend cars, daily drivers and restomods. Our Sparco reclining seat comparison goes through the range side by side.

Garreth’s advice is simple: come and sit in it. The pair is on display now, so you can try the recline, feel the bolsters and see the houndstooth up close before you decide.

No. It is road and track rated, so it is not for competition that requires an FIA seat.

It is base mounted on a 345mm by 271mm pattern, the same as the R100 and R333.

Sparco’s drawing gives 500mm at the shoulders and 550mm at the base.

It takes a four point harness, and it also works with the standard seatbelt.

No. It is the seat only, so each side needs a subframe for your car.

💬
New in the showroomThe GT Houndstooth

A comfortable Sparco recliner with a classic check that suits older cars.

Need a personal recommendation?

We're here to ensure you pick the right seat. Contact us today.
Our showroom virtual walk through!
Have a walk around our showroom before you even buy your new seats. 
Our hands on experience, is what allows us to bring you our recommendations.
Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text