The Sparco sub-frame for the Volkswagen Polo Mk4 in the 9N body, sold as a single frame at part number 00499079-1765. Available in driver (RHD) or passenger side. If you need both sides, order one of each.
The 9N Polo covers the production run from November 2001 to 2009, which includes both the original 9N and the facelifted 9N3. If your Polo was built before November 2001, it’s the 6N2 generation and this frame won’t fit. Check the chassis code on the door pillar if you’re unsure.
The frames use the 345mm x 271mm base-mount bolt pattern, common across Sparco, OMP, and Corbeau base-mount seats. They bolt to the factory seat floor mounting points without drilling.
One thing to know about this specific frame: it requires Sparco sliding runners to mount correctly. Unlike some other Sparco sub-frames where runners are an optional extra for fore-and-aft adjustment, the 9N Polo frame is designed to work through the runner. You’ll need to order the single runner at part number 0049306 or the pair at SS0049302-X2 alongside this frame. Add that to your order at the same time to avoid a gap in the build.
The bolt pattern on these frames is also shared with OMP and Corbeau base-mount seats, so if you’re fitting seats from those brands the frame will accept them.
Will this fit my car?
This frame is made for the Volkswagen Polo Mk4 (9N). Chassis code and years matter more than the badge, as floor pans change between generations, so if your car sits near a changeover year, send us the registration and we will confirm before you order.
Which seats does it take?
It takes seats drilled 345mm x 271mm (the Sparco and OMP seat pattern). The Compatible seats tab above lists what bolts straight on. If your seat is not listed, tell us what you run and we will confirm the fit.
Do I keep fore-and-aft adjustment?
Only with a sliding runner between the frame and the seat, which is a separate part on Sparco frames. If more than one person drives the car, budget for the runner. Our guide to sliding runners explains the options and widths.
Base mount or side mount, and does it matter?
This is a base-mount frame: the seat bolts down through its base, the simpler stack that suits seats with a flat bottom and keeps the install low-fuss. Our guide on base mount versus side mount explains the whole fitting stack.
Is this for the driver or passenger side?
Both sides are available on this listing, pick driver or passenger side at the point of order (sides listed are for right-hand-drive cars). Left-hand-drive car? Ask us, as the sides swap over and availability varies by model.
