A Sparco direct fit sub-frame for the Peugeot 207. Part number 00499056.
The frame bolts to the floor mounting points Peugeot already provided and gives an aftermarket seat a flat 345mm by 271mm base to sit on. That is what makes a seat swap a bolt in job rather than a fabrication project, and it is what keeps the seat load going into structure designed to carry it.
What fits it
Base mount seats on the 345mm by 271mm pattern: Sparco, OMP and Corbeau base mount shells all use it. Older copy across this range said same brand only, which was not correct.
Side mount buckets need side mounts or adaption bars between the shell and the frame.
Ordering
Sold per frame, one frame per seat, handed between RHD driver and RHD passenger. Order twice for both sides.
Send us the seat model with the order so we can confirm the pairing before it ships, and mention if the car still has its side airbags in the seats, because removing a factory seat that carries one has consequences worth understanding before the old seat comes out rather than after.
Frames in this range are either complete replacements or adaption bars, decided by the car. The photograph is illustrative.
Will this fit my car?
This frame is made for the Peugeot 207. Chassis code and years matter more than the badge, as floor pans change between generations, so if your car sits near a changeover year, send us the registration and we will confirm before you order.
Which seats does it take?
It takes seats drilled 345mm x 271mm (the Sparco and OMP seat pattern). The Compatible seats tab above lists what bolts straight on. If your seat is not listed, tell us what you run and we will confirm the fit.
Do I keep fore-and-aft adjustment?
Only with a sliding runner between the frame and the seat, which is a separate part on Sparco frames. If more than one person drives the car, budget for the runner. Our guide to sliding runners explains the options and widths.
Base mount or side mount, and does it matter?
This is a base-mount frame: the seat bolts down through its base, the simpler stack that suits seats with a flat bottom and keeps the install low-fuss. Our guide on base mount versus side mount explains the whole fitting stack.
Is this for the driver or passenger side?
Both sides are available on this listing, pick driver or passenger side at the point of order (sides listed are for right-hand-drive cars). Left-hand-drive car? Ask us, as the sides swap over and availability varies by model.
