This Schroth six-point harness is made to the specific geometry of the Porsche 996, 997, 981 GT4 and 991 GT3. The routing of the shoulder belts, the mounting angles and the length of the sub-strap are set for each model’s factory seat and harness bar position rather than being an adjustable universal harness adapted to fit. Three-inch shoulder belts, 2-inch lap belts, aircraft buckle, clip-in. FIA 8853-2016 homologated. HANS specific in this configuration.
Porsche-specific harnesses exist because the harness bar positions in these cars are lower and further forward than in a typical saloon-based competition car. A universal harness routed to a standard clip-in position sits at a different angle through the shoulder opening of the seat, which affects both comfort and the load path in the event of an impact. The purpose-made geometry for each Porsche model avoids those compromises.
Available in five colours: black, blue, red, silver and yellow. The colour range makes this suitable for cars that are trimmed to a team or owner livery where the harness colour needs to match. HANS specific: requires a frontal head restraint device to be worn for competition use under FIA 8853-2016. If your Porsche is used for circuit sessions and you do not wear HANS, the 3-inch width technically allows the harness to be used without one, but the “HANS specific” designation in our attributes reflects that this model is configured and tested for FHR use.
The companion Porsche 6-point 2×2 at part 94700 covers the same three model families with 2-inch shoulder belts throughout. The Enduro Porsche models cover 996/997 and 991/981 in separate listings. If you are unsure which Porsche variant your car corresponds to, the fit is confirmed against the car’s specific model code, not the year of production, since the 996, 997, 981 and 991 designations refer to internal model generations that overlap by production year.









