Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Porsche 993 With OMP WRC-R Bucket Seats

Customer car, June 2022

One of our customers has just fitted a pair of OMP WRC-R fibreglass bucket seats to their Porsche 993, and the result looks right. The seats sit comfortably in the car, with a good gap between each seat and the door, and they suit the cage and the dark blue paint.

To finish the job they fitted Schroth harnesses in red, which stand out against the black seats. The 993 is now ready for the track. Here is what went in and how it was mounted.

  • Car: our customer's Porsche 993
  • Seats: a pair of OMP WRC-R fibreglass bucket seats
  • Harnesses: Schroth, in red
  • WRC-R approval: FIA 8855-1999, side mounted
  • Mounted on Sparco steel side mounts and Sparco sliding runners
  • Runners re-drilled to the factory floor points to keep the seats low
Two black OMP WRC-R bucket seats with red harnesses inside a dark blue Porsche 993, seen through the open driver's door
Our customer's Porsche 993 with its pair of OMP WRC-R seats and red harnesses.

What is on this page

  1. The car
  2. Fitting
  3. Harnesses

The car and the seats

The OMP WRC-R is a gel coated fibreglass competition seat, trimmed in OMP’s breathable Airtex fabric, and approved to FIA 8855-1999. It has no built in head restraint, so the top of the shell stays low, which helps in a car like the 993 where headroom matters once a cage is in.

The seat has high side bolsters, a removable split leg cushion and five harness slots, so it takes a four, five or six point harness. The standard WRC-R suits drivers under 6ft with a 32 to 36 inch waist.

From the door you can see how much room is left between the seat and the sill. That gap makes getting in and out easier, and it means the harness hardware is not rubbing on the trim.

The red harnesses were our customer's choice. With black seats and a black interior, they give the cockpit a bit of colour and make the buckles easy to find.

The driver's side OMP WRC-R seat in the Porsche 993 with a red harness, seen through the open door
The driver's seat through the open door, with the harness and cage padding.

How the seats were fitted

For the WRC-R in a 993 we recommend Sparco steel side mounts on Sparco sliding runners. Our customer took it a step further and re-drilled the runners to line up with the car’s original floor bolt points, which let the seats sit nice and low.

If you would rather not modify anything, a Planted Technology seat bracket for the 993 is the alternative. It bolts to the factory mounting points, and the runners sit on top. You give up a little of that low seat height, but Planted brackets are very low, so the WRC-R still fits without problems. Our guide to fitting a bucket seat in a Porsche 993 goes through brackets and rails in more detail.

One thing to check if you plan to compete: the Sparco side mounts carry their own FIA approval, but the sliding runners are a non-FIA fitment, fine for road and track days. Garreth’s advice is to check your championship’s rules on seat mounting before you order.

Harnesses to go with it

With a WRC-R you can run a four or six point harness. For a road car that also does track days, a road legal harness is the usual choice; for competition, an FIA approved six point belt is the one to look at. Our guide to road and track harness belts explains the difference.

A pair of OMP WRC-R fibreglass bucket seats, with red Schroth harnesses.

Yes. It is approved to FIA 8855-1999 and is side mounted.

We recommend Sparco steel side mounts on Sparco sliding runners; this customer re-drilled the runners to the factory floor points to keep the seats low.

Yes. A Planted Technology 993 seat bracket bolts to the factory points with the runners on top, at a slightly higher seat height.

💬
Why it worksLow seats, red belts

A pair of WRC-Rs mounted low in a 993, with the belts to match.

Need a personal recommendation?

We're here to ensure you pick the right seat. Contact us today.
Our showroom virtual walk through!
Have a walk around our showroom before you even buy your new seats. 
Our hands on experience, is what allows us to bring you our recommendations.
Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text