Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Honda Civic EM coupe bucket seat guide (2001-2005)

Start with the coupe-specific PCI mount

For the 2001-2005 Civic coupe, start with the PCI SM-EM-A1 adjustable seat mount. It supplies a vehicle-specific lower mounting assembly with side supports for a compatible bucket seat.

PCI lists separate EM coupe and EP hatchback mounts for these years. Choose the physical seating side and confirm the original model and market with the order. An EP3 Type R recommendation does not establish the coupe fitting.

At a glance

  • Application: the 2001-2005 Honda Civic coupe named in PCI’s EM application list; confirm the original model and market.
  • SM-EM-A1 adjusts the installed seat position; it is supplied without a sliding runner.
  • PCI’s physical-left reference is SM-EM-L-A1; physical right is SM-EM-R-A1.
  • One handed fitting assembly serves one front seat. A pair needs a complete left and right installation.
  • Standard A1 kits include PCI side supports. Check the supplied specification before buying additional brackets.
  • A reclining seat needs its own confirmed base-mount route; the side-mount A1 kit does not establish one.
  • Plan the shell width, finished height, belt buckle, rear access and intended use together.

Identify the coupe before choosing the frame

Use the original model, body style and build information to identify the car. This guide follows PCI’s 2001-2005 coupe application for its SM-EM mounts. Include the original market and steering arrangement with the enquiry, particularly for an imported or previously converted car.

Civic names and chassis-code references cross several generations in shop descriptions. The year range and coupe application matter as much as the EM letters. A mount listed for a 1996-2000 Civic belongs to a different application.

PCI’s application list names the coupe. Although some shop prose also mentions a saloon, that wider fitment needs separate evidence before we recommend it. For an EP hatchback, use the separate Civic EP3 guide as the starting point.

The PCI SM-EM-A1 fitting route

The SM-EM-A1 connects the original seat mounting locations to PCI side supports and a compatible side-mounted shell. PCI supplies SM-SIDE-A1 supports as its standard A1 configuration. Have the quotation identify the actual supplied kit and seat together. Compare the shell’s fixing dimensions with those supports before ordering.

Set the position using the kit’s installation adjustment, then secure it according to the supplied instructions. A1 does not include an occupant-operated sliding runner.

Side supports are included, so check the supplied specification before buying another set. A pair of seats needs two handed assemblies with the necessary fasteners and restraint fittings. Each assembly must suit its particular position in the car.

Order by the physical side and full PCI reference

PCI lists SM-EM-L-A1 for physical left and SM-EM-R-A1 for physical right. Our current variants call those RHD Passenger Side and RHD Driver Side respectively.

Driver and passenger swap with the steering arrangement. Put the physical side and full supplier reference on the order for an imported car. The original model and market still need matching to the application.

Physical positionPCI A1 referenceRight-hand-drive carLeft-hand-drive car
LeftSM-EM-L-A1PassengerDriver
RightSM-EM-R-A1DriverPassenger

Decide whether the seat needs to slide

A fixed installed position can suit a car set up around one occupant. For a shared car, decide whether sliding adjustment is needed before ordering A1.

PCI also lists SM-EM-L-S1 and SM-EM-R-S1 sliding mounts for the 2001-2005 coupe. These are complete alternative mounting assemblies. Adding an unrelated universal runner to A1 needs its own confirmed mounting assessment. It does not establish the intended S1 arrangement.

Our sliding listing carries EM S1 codes but an EP3 title. Ask us to confirm the full supplied coupe reference before ordering that route. The separate EP hatchback S1 kit has a different application.

For rear-seat access, check the actual seat movement and the remaining door opening. Sliding travel alone cannot tell you how much room is left to get into the back.

Compare the shell and the complete driving position

Cobra Monaco Pro, Corbeau Sprint X System 1 and OMP Champ-R are options to measure with the proposed assembly. These cards do not claim an already tested EM coupe installation. Choose the exact seat version before settling its supports and position.

The Monaco Pro permits base and side mounting; use its side fixing for the PCI route described here. The Sprint X and Champ-R use side mounting. Check the actual shell and supplied support drawings before choosing the position.

Compare the shell at the hips and shoulders, then check its fixing points against the supplied PCI supports. Leave room for the door trim, centre console and belt buckle.

Try the position with the actual occupant and any helmet or equipment used in the car. Garreth would choose the support and access first. Settle the trim once the fitting assembly is clear.

A recliner needs a confirmed base-mount installation

A reclining sports seat may suit the access and adjustment wanted in a road-going coupe. Its base fixing pattern needs a compatible connection through the vehicle bracket and runner. The SM-EM-A1 side-mount kit does not establish that route.

Send us the exact recliner and original car details for a fitting recommendation. Include whether both seats must slide and whether the rear seats remain in use.

EP3 M2 fitting kits and adaptation bars need their own coupe application evidence before they can be recommended here. With a reclining seat, check the usable backrest movement as well as runner travel. The finished installation determines rear access.

Resolve the original belt and seat equipment

Identify the original buckle attachment and any equipment connected to the seat before removal. The installer needs to establish how the required restraint functions and other original systems will be retained.

Check the proposed shell, belt path and fixing hardware with the occupant in position. A vehicle-specific seat mount does not automatically approve a new buckle attachment. Establish a suitable belt route for the finished installation.

Choose the restraint from the intended use and anchorage

TRS 21A300 is the bolt-in three-point listing; 21B400 is the clip-in four-point Clubman. Match the actual harness specification and attachment hardware to the car. Both shop listings are marked as unsuitable for HANS, so an FHR installation needs a different specifically suitable restraint.

The four-point Clubman has shoulder and lap straps. Do not assume a crotch strap is supplied from the four-point description. A restraint requiring a crotch strap needs the correct complete harness and anchorage specification.

PCI describes sub-belt mounting locations in its A1 design. Those locations alone do not approve a whole five- or six-point installation.

Follow the selected harness and seat instructions for the anchorage and routing. For a competition build, include the event requirements with the enquiry. Any cage or harness bar needs its own coupe-specific application and installation assessment.

Our motorsport harness fitting guide explains the wider planning questions. Have a competent installer assess the whole restraint system before use.

Write down one complete assembly per seat

Write down one parts list for each position, starting with the original coupe identity and physical side. Include the full PCI reference, supplied supports, exact shell, fasteners and restraint fittings. For two seats, account for the different control and buckle clearances on each side.

Part of the jobStarting pointEstablish before ordering
Vehicle application2001-2005 Civic coupeOriginal model, market and mounting arrangement
A1 side-mount kitSM-EM-L-A1 left or SM-EM-R-A1 rightSelected supplied variant and included supports
Sliding alternativeCoupe-specific SM-EM S1Full supplied code; resolve the shop title mismatch
Bucket seatA shell matched to the actual supportsFixing dimensions, occupant position and cabin clearances
Reclining seatA separately confirmed base-mount routeVehicle bracket, runner, base pattern and rear access
Belts and harnessThe actual restraint specificationAnchorage, buckle, routing and intended use

Inspect the mountings and trial the finished position

Have the original seat mounting areas inspected with the surrounding trim lifted. Identify corrosion, damaged threads, previous repairs and any conversion parts already fitted. The new kit relies on sound vehicle structure and the correct fixing hardware.

Trial the complete installation before final assembly. Check the steering wheel, pedals and head clearance with the actual occupant. Close the door, operate the controls and establish that the buckle remains usable.

For a sliding arrangement, check the full usable travel and locking operation, including rear access where needed. Use the supplied instructions for tightening and any spacers.

Use the guide for the original generation and body

For the preceding generation, see our 1996-2000 Civic EK guide. The EP3 guide covers the separate hatchback route from this period. Keep the original body information with the enquiry if the engine or badges have changed.

Send photographs of the existing mountings and buckle with the original car details through our contact page or chat. Add the exact seat and the use you have planned. That gives us the information needed to build a complete fitting recommendation.

Common questions

Which Civic is this guide for?

The 2001-2005 Civic coupe named in PCI's SM-EM application, with the exact original model and market checked before ordering.

Does this cover the EP3 Type R hatchback?

The EP hatchback has separate PCI mounting codes and its own guide; this route follows the coupe application.

Does the EM name also cover every earlier Civic coupe?

Use the actual year and body application, because a 1996-2000 Civic mount is a different fitting route.

Is a 2001-2005 saloon covered?

PCI's retained application names the coupe, so a saloon needs separate confirmed evidence before we recommend this kit.

Which A1 reference is physical left?

SM-EM-L-A1 is physical left, which is the driver position in a left-hand-drive car and passenger in a right-hand-drive car.

Which A1 reference is physical right?

SM-EM-R-A1 is physical right, which is the driver position in a right-hand-drive car and passenger in a left-hand-drive car.

Does one kit mount two seats?

One handed assembly serves one front seat; specify a complete left and right installation for a pair.

Are PCI side supports included?

PCI specifies SM-SIDE-A1 supports as standard with its A1 mounts; confirm the actual supplied kit before ordering separate brackets.

Does A1 include a sliding runner?

A1 allows the position to be set during installation; it does not include an occupant-operated sliding runner.

Can I add any universal runner to the A1 kit?

That combination needs its own confirmed mounting assessment; PCI's coupe-specific S1 is a different complete assembly.

What is the sliding coupe code?

PCI lists SM-EM-L-S1 for physical left and SM-EM-R-S1 for physical right in its 2001-2005 coupe application.

Why check the sliding kit's full reference?

The shop's EP3 title and EM code disagree, so have the complete supplied coupe-specific reference confirmed before ordering that route.

Will any side-mounted bucket fit?

Match the exact shell's fixing dimensions and instructions to the supplied supports, then establish the position in the car.

Are the bucket seats below already tested in this coupe?

They are seat options to assess with the proposed assembly, without a claim that each has a verified EM coupe installation.

Can a recliner use this A1 side-mount route?

A base-mounted recliner needs a separately confirmed connection through its vehicle bracket and runner to the seat base.

Does sliding adjustment guarantee access to the rear seats?

Check the actual seat movement and remaining door opening in the finished installation before relying on rear access.

Can I reuse the original belt buckle?

Have the installer establish a suitable attachment and belt route with the actual seat, original equipment and complete assembly.

Does a four-point Clubman include a crotch strap?

TRS describes shoulder and lap straps for this four-point Clubman; do not assume a crotch strap or a five- or six-point installation from its name.

Can I use an EP3 cage in the coupe?

A cage needs its own exact body application and installation evidence; an EP3 listing does not establish a coupe fit.

What information should I send for a complete quote?

Send the original model, build and market, steering arrangement, physical side, exact seat, intended use and photographs of the floor fittings and buckle.

Garreth's top tip

I would decide whether the car needs sliding adjustment before choosing the frame. That decision affects a shared driving position and access to the back of a coupe. Then try the seat support and have one complete fitting assembly priced alongside it.

For two seats, ask for the physical left and right codes to be written on the quote. It makes the order easier to check, especially with an import. Choose the trim after the seat and mounting route are clear.

Cameron's fitting view

I would identify the original mounting arrangement and belt buckle attachment before taking the old seat out. Previous conversions can leave parts that are easy to mistake for original fittings. The new kit needs sound mountings and the correct supplied hardware.

Then trial the position with the occupant in place. Include the door, pedals, steering wheel, head clearance and any adjustment or rear access required. Have the instructions for all of the supplied parts together for the final assembly check.

Plan your Honda Civic coupe 2001-2005 seat change

Drop us an email or open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.

Back to the Car Seat Selector guide.

Application references: PCI’s adjustable mount and slider mount listings distinguish the 2001-2005 EM coupe and EP hatchback. Confirm the exact supplied reference and original vehicle before ordering. Harness references: TRS’s four-point Clubman and bolt-in three-point specifications.

Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text