Ford Probe 1993-1997 Bucket Seat Guide
Choose the Probe seat and its complete lower assembly
For the 1993-1997 Probe, our Planted Technology SB230 bracket is the vehicle-specific fitting route to discuss. Choose the actual seat and its adjustment before ordering the parts beneath it. A bucket using side supports and a reclining seat using lower fixings need different assemblies above the vehicle bracket.
Garreth would try the cushion, shoulder support and getting over the bolster before choosing a finish. Cameron would match the physical seat side, slider pattern and all connections to the car. Include any access behind the front seats that you still want to keep.

At a glance
- Application: Ford Probe 1993-1997, as named by Planted. Keep the exact vehicle year and existing mounts with the enquiry.
- Shop bracket family: SB230. The maker identifies physical-left SB230DR and physical-right SB230PA.
- For a right-hand-drive Probe, the physical-right bracket is the driver’s side, despite the maker’s US Passenger / Right label.
- Planted offers Standard and Alternate slider patterns. Confirm the actual supplied pattern for the chosen runner.
- A runner and any side supports are separate parts of the seat assembly; check the contents of the bracket order.
- The 345mm x 271mm diagram below describes Sparco seat-side centres, not Probe floor holes or an installed seat height.
Start with the SB230 vehicle bracket
The current Planted application names the Ford Probe from 1993 to 1997. Its left-side bracket is SB230DR and its right-side bracket is SB230PA. Our product card carries the family reference SB230, with RHD driver and passenger selections.
Record the physical side as well as the driving side. Planted’s Driver / Left and Passenger / Right titles use US naming, while the driver in a right-hand-drive car occupies the physical right. Cameron would keep that distinction on the order and confirm the actual supplied reference.
The bracket provides the vehicle connection beneath the selected seat assembly. Check the separate runner, supports and hardware that the seat needs before completing the order. Garreth would settle the support and movement he wants from the seat before choosing those parts.
Keep this application with the actual car. The Mazda MX-6 listing found alongside it carries a different Planted family reference, SB285. A related platform or similar-looking bracket is not a reason to substitute one for SB230.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Choose the slider pattern with the runner
Planted’s Standard pattern includes its Recaro slider pattern. The Alternate version replaces that pattern with the Cobra and Scheel-Mann slider arrangement. The maker identifies COBRA-prefixed SB230 variants for that alternative.
The brand also distinguishes Cobra narrow and wide runners in its fitting notes. Confirm the exact runner and bracket option together instead of using a seat brand name alone. Our shop card shows the physical seat side, so include the required slider pattern in the enquiry as well.
Cameron would compare the actual interfaces before the parts are assembled. Keep the seat-to-runner connection separate from the runner-to-bracket connection. A shared measurement at one of them does not establish the complete installation.
Compare Sprint, Sprint Sky and Sprint L
The Sprint and Sprint Sky give two upholstery surfaces on a fixed-back seat family, while Sprint L is the larger option. Garreth would sit in the intended size before choosing the trim. Try entry, exit and the support at the hips and shoulders before deciding on the shell.
Sparco’s cited catalogue gives the illustrated Sprint and Sprint Sky families 345mm x 271mm lower fixings and 290mm lateral fixing spacing. Confirm the exact supplied version and its instructions. Choose the lower-fixing or side-support arrangement before specifying the parts beneath it.
These are seats to assess with the complete SB230 assembly and the car’s available space. Cameron would check the door-side bolster, tunnel and controls in the useful seating position. A listed vehicle bracket does not predict clearance for every shell or driver.
-
From £252.00 Incl. VATFrom £210.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Connect a side-mounted shell through its supports
The Sparco steel side supports shown here are an option to check with a shell using lateral fixings. The shell connects through its sides, and the support base connects to the confirmed runner or fixed lower arrangement. Match those connections to the exact seat and support instructions.
Planted publishes separate installation guidance for side-mounted seats with and without sliders. A fixed arrangement may need a new hole pattern in the bracket, as described in that guidance. Cameron would have the chosen position and complete hardware assessed before any bracket modification.
Specify the separate Sparco sliding arrangement
The current Sparco runner listing carries 0049306. It is the separate sliding option to compare for the Sparco seat examples, with its connections checked against the chosen lower fixings or side supports and the SB230 bracket. Do not add a second runner set without establishing what the order already contains.
Planted lists Sparco among the slider brands accepted by its slotted bracket family. Confirm the exact current runner, bracket pattern and handle orientation before assembly. Cameron would check that the rails stay parallel and release and lock together through the travel the driver needs.
Include the runner, all supports and the cushion when judging the finished position. Garreth would check wheel and pedal reach with the seat set for normal use. A low-looking bracket or runner name cannot establish a headroom gain.
Sparco’s 345mm x 271mm lower fixing centres
Sparco’s seat catalogue gives 345mm across by 271mm front to rear for the illustrated lower-fixing arrangements used by the Sprint, R100 and R333 families. The diagram draws those centres at one scale. The pale outer outline is schematic.
These are seat-side dimensions, separate from the Probe floor fixings and Planted’s complete slotted pattern. Confirm the actual seat, runner and support connection against their drawings. Measure outside width and control clearance separately in the car.
R100, R100 vinyl and R333 reclining choices
The R100 fabric and vinyl versions give two finishes on a reclining seat family, while the R333 has a different cushion and bolster shape. Garreth would try the support and normal entry before choosing the surface. Operate the backrest through the movement you want to retain.
Sparco’s catalogue gives the R100 family and R333 345mm x 271mm lower fixings. Match the exact seat to its runner and the confirmed SB230 slider pattern. Those seat-side centres establish one connection without promising clearance or an installed height.
Cameron would check that the reclining controls remain accessible beside the tunnel and door. Include the space behind the backrest and any access you need beyond the front seats. Trial the whole assembly with the driver before settling on the seat.
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £449.47 Incl. VATFrom £374.56 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Choose the belt layout with the seat
The four-point examples and six-point competition option shown here have different strap and attachment layouts. Start with the intended use and the exact seat’s belt openings. A reclining seat and a competition bucket should not be assumed to take the same arrangement.
Cameron would compare the belt maker’s routing instructions with the available attachments and buckle access. Include any rear passengers the car needs to carry. The seat frame does not establish harness attachment points or the complete belt installation.
-
From £120.00 Incl. VATFrom £100.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £81.00 Incl. VATFrom £67.50 Excl. VATPayPal CreditAmazing valueSpeed+ ServiceSelect options This product has multiple variants. The options may be chosen on the product page
-
From £444.01 Incl. VATFrom £370.01 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Trial the bracket before assembling the complete seat
Photograph the original mounting arrangement and record any earlier floor or seat changes. Planted’s installation guidance starts by checking the correct components and trial-fitting the vehicle bracket at the floor. Follow the current vehicle and kit instructions when identifying the original equipment and fasteners.
Once the bracket application is confirmed, Planted describes assembling the chosen components outside the car before trialling the whole assembly. Use the appropriate guidance for lower or side fixings, with or without sliders. Keep the actual seat and runner instructions with that plan.
Have the fitter identify the belt-buckle attachment and hardware needed for the retained belt arrangement. A frame listing does not establish every belt connection or supply all the fasteners. Cameron would include buckle access in the driving-position trial.
With the driver seated, check wheel and pedal reach, headroom, door closure and clearance beside the tunnel. Operate the rails and any backrest movement through the range you need. Garreth would try normal entry and exit, while Cameron would repeat the movement and locking checks after final tightening.
Common questions
Planted names the 1993-1997 Ford Probe for this bracket family. Give us the actual year, physical seat side and any previous mounting changes. The application should not be extended to another generation from the Probe name alone.
The driver occupies the physical right, corresponding to SB230PA in the cited maker listing. Planted labels that part Passenger / Right using US terminology. Keep the physical side and driving side together when confirming the order.
Planted’s Standard pattern includes the Recaro slider pattern. Its Alternate version replaces that with the Cobra and Scheel-Mann slider pattern. Confirm the exact runner and the supplied bracket option before assembling the seat.
Check the contents of the actual order. The vehicle bracket, runner and any side supports are separate parts of the fitting plan. Choose the complete arrangement for the exact seat before adding further sliders.
A shell with lateral fixings needs its matching supports and a checked connection to the lower assembly. Planted distinguishes side-mounted arrangements with and without sliders in its instructions. Confirm the whole assembly and trial it in the car.
They describe the illustrated Sparco lower seat-side fixing centres. They do not give the Probe floor-hole pattern or outside seat width. Check the remaining interfaces and cabin clearance separately.
That depends on the selected seat, runner, bracket pattern and fixed or sliding arrangement. Planted’s instructions describe cases where a new bracket hole pattern is needed, including fixed arrangements. Have the actual configuration checked before any modification.
The cushion and every fitting beneath it determine the finished position. Trial the complete seat with the driver and check control reach as well as headroom. The bracket application alone cannot predict a height change.
Garreth’s top tip
Garreth would try the Sprint sizes before settling on a fixed shell, then compare the R100 or R333 if backrest movement matters. Include entry and any access behind the seat in that trial. Choose the support and adjustment first, then finish the parts list beneath the cushion.
Cameron’s fitting view
Cameron would record physical right or left before interpreting the maker’s US driver and passenger labels. He would confirm the actual SB230 pattern, runner, seat and any side supports as one assembly. A final trial in the car checks the clearance and posture that a seat-side drawing cannot establish.
Plan your Ford Probe 1993-1997 seat change
Drop us an email or click to open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Sources: Planted’s current Probe physical-left application; physical-right application; Planted installation arrangements; Planted fitting FAQs; Sparco 2025 seat and runner catalogue, retained manufacturer dimensions; current linked shop listings.










