Call Garreth, Cameron & Jack: 0115 647 8650

FREE UK shipping on orders over £100.00 & FREE gifts on checkout

Your garage NewAdd your car and see the parts that fit
Useful Links
Your Account

Talk to us

Garreth, Cameron & Jack · Mon to Fri
Call 0115 647 8650Free advice on your build
Thanks, that’s with us. We reply the same working day.
That didn’t send. Please give us a call instead.

Useful Links

Quick Access

Want to chat?

Call Garreth, Cameron, Jack
Today On: 0115 647 8650
Click Here For Our Contact Form

 

 

Definitive Guide to Fibreglass-Back Reclining Sport Seats

Reclining seat guide

Reclining sport seats with a composite back, whether fibreglass, carbon fibre or a hybrid, sit between a factory seat and a fixed bucket. They give more support than a normal recliner, they look the part from the back seat, and they still recline and tilt for access, so they work in a car that is driven every day and taken on the odd track day.

This guide explains what a hard-back recliner is and why you might want one, then goes through the main seats of this type on our site: the Recaro Sportster CS, the Cobra Misano Anniversary, the Sparco SPX, the Bride Stradia III and the Auto Style BS5. None of them is FIA approved; they are road seats built to be good on a track day too.

  • Hard-back recliners use a fibreglass, carbon or hybrid back shell with a reclining mechanism
  • They are road and track day seats, not FIA approved competition seats
  • The Recaro Sportster CS has a steel base and a composite reinforced backrest
  • The Cobra Misano Anniversary has a carbon fibre backrest and is made to order
  • The Sparco SPX has a carbon back and a composite base, at around 12kg
  • The Auto Style BS5 is the budget option, with a fibreglass reinforced back and sliders included
A pair of black leather Cobra Misano Anniversary reclining seats with diamond stitching in the GSM Performance showroom
A pair of Cobra Misano Anniversary seats in our showroom. The Misano has a carbon fibre backrest.

What a hard-back recliner is

Most reclining sport seats are built on a steel frame with foam and trim over it. From behind, you see a trimmed panel. A hard-back recliner replaces some or all of that with a moulded shell, in fibreglass (FRP or GRP), carbon fibre, aramid or a mix of materials. The shell is visible from the back, and it gives the seat a stiffer, more shaped structure.

The reclining mechanism, the tilt for access to the rear seats and the everyday usability stay. What changes is the feel: a shell that does not flex, deeper and more shaped bolsters, and a look that comes from motorsport.

Why choose one

  • Support. A shaped shell holds the shoulders and hips better than a padded frame, so you move about less in a fast corner.
  • Stiffness. The back does not flex under load, which gives a more connected feel through the seat.
  • Weight. A carbon or composite shell can be lighter than a steel framed recliner of the same size, although this varies a lot between seats, as the list below shows.
  • Looks. The exposed carbon or coloured shell looks good from the back seat and through the rear window.
  • Usability. Unlike a fixed bucket, they recline, tilt for rear access and are comfortable on a long drive. Some come with heating and lumbar options.

The trade is price. Composite shells cost more to make, so these seats sit at the upper end of the recliner market, with the Auto Style BS5 the exception. Garreth’s advice is to sit in one before you buy, because the shaped shell that makes these seats good also makes the fit more personal.

Recaro Sportster CS

The Sportster CS is the seat most people think of in this category. Recaro describe it as a hybrid: a steel base with a reinforced composite backrest. The result is a slim seat with the shoulder and thigh bolsters of a racing shell, an integrated headrest and belt openings for a four point harness, which still reclines on both sides and tilts forward.

We list it in leather and suede, and with a side airbag and heating in some versions. It is a base mount seat on a 405mm by 290mm pattern, and Recaro seats go on Planted brackets. It is sold as the seat only, so the frame for your car is separate. Our Recaro Speed and Sportster CS comparison covers it in more depth.

A black Recaro Sportster CS seat with red edging and carbon effect panels fitted in a car beside a red and black Recaro seat
A Recaro Sportster CS fitted in a car.

Cobra Misano Anniversary

The Misano Anniversary is Cobra’s luxury recliner, and we have had it on display in the showroom. Its backrest is pure carbon fibre, on a polished steel chassis, and the seat is trimmed in leather with diamond stitching on the backrest and cushion, as in the pair above.

Our listing gives the size as 885mm tall, 590mm wide, with a 520mm base and 620mm depth, at 11.5kg. It fits drivers of all heights with a waist up to about 38 inches. Options include a fitted seat heater with lumbar support, or an inflatable lumbar. It is made to order with a four to six week lead time, and if you are fitting a pair, ordering both together means the trim comes from the same batch.

It is a base mount seat on Cobra’s 291mm by 330mm pattern, road and track, with no FIA approval. It takes a four point harness.

Sparco SPX

The SPX is Sparco’s top recliner. Sparco describe it as the first carbon fibre reclining seat sold to the public to the same specification they supply to car makers, and it is made in Italy. The backrest is carbon and the lower section is composite, which brings the weight to around 12kg.

It is trimmed in Italian leather, perforated where it needs to breathe, with an Alcantara centre that stops you sliding about. It reclines, takes the standard seat belt or a four point harness, and has no head support wings. The SPX is handed, so order a driver side and a passenger side for a pair. It base mounts on Sparco’s 345mm by 271mm pattern, as the seat only.

Bride Stradia III

Bride, from Japan, build their reclining seats around a monocoque shell, and the Stradia III is one of them. It comes with a silver FRP shell or a Super Aramid black shell, and in gradation logo, black or red fabric, with a standard or low cushion. The low cushion lets the seat sit lower in a car where headroom is tight.

Bride say the Stradia III shares its shell design and bone frame with their ZETA IV bucket, with a stepwise reclining mechanism designed to reduce play. It has large harness openings. We list it on our site as a base mount seat, supplied as the seat only. Bride seats come from Japan, so ask us about lead times.

The backs of two Bride Stradia III reclining seats, one with a black carbon aramid shell and one with a silver FRP shell
The Stradia III from behind: the Super Aramid black shell and the silver FRP shell.

Auto Style Type BS5

At the other end of the price range is the Auto Style BS5. It is a steel framed recliner with a fibreglass reinforced backrest, which stops the back panel flexing under load in a corner. That is the functional difference from a standard steel framed recliner.

It has recline adjustment on both sides, black fabric trim and slots for a four point harness. At around 16kg it is heavier than the composite seats above, and it is sized for drivers under six feet. It base mounts on a 345mm by 280mm pattern, and sliders are included. If you like the idea but not the height limit, the Auto Style BS2 also has a fibreglass reinforced backrest, with no height restriction.

The seats side by side

SeatBackBase patternNotes
Recaro Sportster CSSteel base, composite reinforced backrest405 x 290mmPlanted brackets; airbag and heating versions
Cobra Misano AnniversaryCarbon fibre backrest291 x 330mm11.5kg; made to order, 4 to 6 weeks
Sparco SPXCarbon back, composite base345 x 271mmAround 12kg; handed
Bride Stradia IIIFRP or Super Aramid shellBase mountStandard or low cushion
Auto Style BS5Fibreglass reinforced back345 x 280mmAround 16kg; under 6ft; sliders included

Choosing the right one

Start with how the car is used and what it needs to fit. All of these are road seats that will do a track day. If you plan to compete, you need an FIA approved seat, and none of these is one.

Then check the fit. Measure the space in the car, especially the height from the floor to the roof, and remember that the frame adds height. Check the base pattern against the frames available for your car, and keep to the seat maker’s own frames or the brackets they recommend. For Recaro, that means Planted.

Finally, sit in it. The shaped shells that make these seats good also make them personal. Come to the showroom and try what we have on display, or send us your height, waist and car and we will tell you which suits. If you are also looking at Sparco’s other recliners, our Sparco reclining seat comparison covers the range.

A reclining sport seat with a moulded composite back shell, in fibreglass, carbon, aramid or a hybrid, in place of a trimmed steel frame.

None of the seats in this guide is FIA approved; they are road seats built to handle track days.

The Cobra Misano Anniversary has a carbon fibre backrest, and the Sparco SPX a carbon back with a composite base.

The Auto Style BS5, a steel framed recliner with a fibreglass reinforced back, with sliders included.

All five take a four point harness through their belt openings; ask us about the mounting for your car.

💬
Our pickCobra Misano Anniversary

A carbon backed recliner trimmed in leather, made to order with heating and lumbar options.

Need a personal recommendation?

We're here to ensure you pick the right seat. Contact us today.
Our showroom virtual walk through!
Have a walk around our showroom before you even buy your new seats. 
Our hands on experience, is what allows us to bring you our recommendations.
Free UK Shipping

On all orders above £100

Showroom

Try before you buy, by appointment

Delivery Tracking

Updates by email and text