Cobra Monaco 40th Edition With White Stitching
Showroom news, October 2023
A pair of Cobra Monaco 40th Edition bucket seats is now on display in our showroom, in black vinyl with white stitching all round. They are ready to try, and as they are here they can go out straight away or be collected.
The 40th Edition is the Monaco with a retro finish. Rows of eyelets run down the backrest, which gives it a classic look next to the more modern styling of the other Monaco seats.
- A pair of Cobra Monaco 40th Edition seats with white stitching is on display
- Black vinyl trim with rows of eyelets down the backrest
- Steel plated seat with a solid back and base, approved to FIA 8855-1999
- Base mount or side mount, with slots for a 4-point or 6-point harness
- Cobra list it for drivers under 6ft with a 32 to 36 inch waist

What is on this page
The 40th Edition in the showroom
The pair on display is black vinyl with white stitching around the bolsters and across the backrest panels. Most of the classic look comes from the eyelets, three to a panel down the back of the seat, which set it apart from the other seats in the Monaco range.
Under the trim it is the Monaco shell, so you get retro styling on a modern steel seat. The 40th Edition was made to mark forty years of Cobra, and the anniversary shows in the finish, not in any change to the engineering.
The seat is fully steel plated, with a solid back and base for intrusion protection and an integral head pad and shoulder support. It is approved to FIA 8855-1999 and weighs 11.4kg, which is the cost of the steel plating.
It is quite narrow at the base. Cobra list it for drivers under 6ft with a 32 to 36 inch waist, and Garreth's advice is to sit in one if you are near the edge of that. Narrower and wider Monaco shells exist too.

-
From £474.00 Incl. VATFrom £395.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £282.00 Incl. VATFrom £235.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
The wider Monaco range
The 40th Edition can be ordered with different stitching colours, including black, blue, green, red, white and yellow, so it can be matched to a car. We also carry Monaco seats in other trims, approvals and widths, from the narrow Monaco Sport for small cockpits to the FIA approved Monaco Pro.
If you are choosing between them, check which FIA standard your class names before you buy. FIA 8855-1999 is what most club competition asks for, and the approval runs from when the seat was made, so ask us to read the date on the seats we hold. Our Cobra Monaco Pro guide covers the Pro in more detail.
Mounting and harnesses
The Monaco 40th can be base mounted or side mounted, so you are not tied to either when you order. It comes as the seat only, so tell us the car and we will match the frames and mounts. It has slots for a 4-point or 6-point harness, and our guide on how to fit a motorsport harness covers the angles and mounting points.
Is the Cobra Monaco 40th Edition FIA approved?
Yes. It is approved to FIA 8855-1999.
What makes the Monaco 40th Edition different?
The finish. It has retro eyelets down the backrest on the same steel Monaco shell.
Can the Cobra Monaco 40th Edition be side mounted?
Yes. It can be base mounted or side mounted.
What size driver suits the Monaco 40th Edition?
Cobra list it for drivers under 6ft with a 32 to 36 inch waist.
💬
Why we like itRetro looks, steel seat
The Monaco's FIA steel shell with eyelets and white stitching for a classic cabin.
Need a personal recommendation?
We're here to ensure you pick the right seat.
Contact us today.




