Which Sliding Runners Do I Need For My Vauxhall Astra Mk5 Passenger Seat Subframe?
A customer wrote in with half an Astra Mk5 seat setup: subframe bracket and driver side runner kit already bought, passenger side runners missing. They wanted to know which runner is correct, whether it's handed and how it meets the frame. The runner goes by the seat's bolt pattern rather than the car, and the listings we checked sell one kit per seat.
- Prices read from the live site, inc VAT
- Every runner listing and the Astra frame listings read in full
- Handing is only stated where a listing states it

Match the runner to the seat pattern, then to the driver side kit
£41.94inc VAT
The Sparco single kit is the cheapest route for one seat on the 345mm x 271mm pattern. Tell us your seat and the driver side kit first.
- The runner sits between the frame and the seat, so the seat's bolt pattern picks it, not the Astra
- Sparco, OMP and Corbeau base mount seats use 345mm x 271mm, and Recaro uses 405mm x 290mm
- The Sparco, Corbeau and Endurance listings sell a kit per seat and none describes a left or right version
- Tell us which driver side kit you've already got and we'll match the passenger side to it
Where the runner sits on an Astra Mk5
The runner is the middle layer. From the floor up, the Astra frame bolts to the mounting points already in the car, the runner bolts to the frame, and the seat goes on top. With a side mount shell, the side mounts go on the shell and the runner sits underneath them.
The frame is the only part cut for the Astra Mk5, and the runner only has to match the seat above it, so if it’s the same seat both sides, it’s the same runner pattern both sides.
Corbeau’s listing says the runner adds height under the seat, which you’ll notice if headroom is tight or you wear a helmet.
Floor
The Astra's own mounting points. Nothing is drilled.
Frame
The OMP or Sparco direct fit subframe, handed driver or passenger.
Runner
Fore and aft slide, chosen by the seat's bolt pattern.
Side mounts and seat
Side mount shells carry their brackets above the runner.
Is the passenger side runner a different part?
The frame is handed. The OMP Astra Mk5 frame is sold singly and handed, with driver side and passenger side options, and the pair listing covers one of each. If your bracket is already on the car, that’s the one part you can’t swap sides.
The runner listings don’t say the same. The Sparco, Corbeau and Endurance runner pages describe a kit that fits one seat, and none of them lists a driver or passenger version. Corbeau’s pages word the quantity two ways, one saying a pair covers both seats and another saying one runner fits one seat, so we confirm the count with you before you order.
Garreth’s tip is that the pattern matters more than the side. Cameron will want to see what’s on the driver side first, because a passenger runner in a different brand can have a different handle and a different travel. Either way, we’ll check it against your driver side before we send you a kit.
The frame the runner bolts to
The OMP Astra Mk5 frame, part number HC850, is a steel base mount frame that uses the floor points already in the car. It carries two bolt patterns, 345mm by 271mm for Sparco, OMP and Corbeau base mount seats and 405mm by 290mm for Recaro. Nothing is drilled, and the standard seats come out whole.
Those two patterns are what decide your runner. The Sparco frame for the Astra Mk5 is the three door part and is on the 345mm by 271mm pattern only, and its listing asks you to tell us before ordering if your car is a five door. Side mount shells need side mounts or adaption bars over the frame.
- From £144.90 inc VAT, one frame
- Handed: RHD driver side or RHD passenger side
- 345mm x 271mm and 405mm x 290mm patterns
- Steel, base mount, no drilling
-
From £144.90 Incl. VATFrom £120.75 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Product cards show prices excluding VAT. Prices in the text include VAT.
Which runner for which seat
For Sparco, OMP and Corbeau base mount seats on the 345mm by 271mm pattern, there are four kits to choose between. The Sparco single kit fits one seat and is the right order for a single missing side. The Sparco two runner kit covers both seats. The Corbeau pair uses a 345mm handle, and the Endurance Sparco compatible runner is cut to Sparco’s spacing.
| Kit | Brand | Price inc VAT |
|---|---|---|
| Sparco Seat Sliding Runner Kit | Sparco Seats | £41.94 |
| 2 Sparco Seat Sliding Runner Kit | Sparco Seats | £78 |
| 2 Corbeau 345mm Seat Sliding Runners | Corbeau Seats | £117.60 |
| Endurance Sparco Compatible Premium Track Day Runner | Endurance Motorsport | £90 |
| Endurance Motorsport Recaro Compatible Runner Kit | Endurance Motorsport | £95.04 |
Prices include VAT and are read from the live site.
Sparco single runner kit: one seat, 345mm x 271mm
The Sparco kit, part number 0049306, bolts to Sparco’s 345mm by 271mm pattern. The listing says it works with any base mount seat on that pattern, including OMP and Corbeau as well as Sparco. It is steel and sold as one kit per seat.
The listing calls it a non-FIA fitment and adds that competition cars usually bolt the seat straight to the frame without a runner. If you need both sides in one order, the Sparco two runner kit is the easier buy. For one missing side, this single kit is the correct order.
- £41.94 inc VAT
- Part number 0049306, steel
- 345mm x 271mm base mount pattern
- One kit per seat
If the seat is a Recaro: the 405mm route
The Endurance Motorsport Recaro compatible kit is cut to Recaro’s 405mm bottom bolt spacing. The listing says a generic runner won’t line up with a Recaro seat without drilling. The OMP Astra frame carries the 405mm by 290mm pattern, so a Recaro seat has a frame to sit on.
If you’re replacing a runner on an older Recaro, the listing suggests measuring your current runners first, because older Recaro seats can use a narrower pattern. Send us the seat model and Cameron will check the spacing with you.
- £95.04 inc VAT
- Cut to Recaro's 405mm bolt spacing
- Sits between the frame and the seat
Completing a half-bought setup
We need three things from you: the make and handle width of the driver side runner kit you’ve already got, the seat on top and whether it’s a base mount or a side mount shell, and which frame you bought, OMP or Sparco, plus whether the car is a three door or five door.
With those, we can say whether the Sparco single kit finishes the job or the passenger side needs a different pattern. Our Astra Mk5 bucket seat guide lists the frames and seats, and our guide to Sparco runners on an MX-5 shows the same frame, runner and seat order on another car. For timings on any kit, use the Availability and FAQ tabs on its product page.
Common questions
Are driver and passenger runners different parts?
The frame is handed. The Sparco, Corbeau and Endurance runner listings describe one kit per seat and do not list a left or right version. We confirm on your seat when you order.
Can I fit a different brand of runner on the passenger side?
If the seat pattern is the same, it can bolt up. Cameron’s fitting view is to match the brand, because handle and travel can differ and the two seats should feel the same. The Sparco listing says it works under OMP and Corbeau seats too.
Which bolt pattern does the Astra Mk5 frame have?
The OMP frame has 345mm by 271mm for Sparco, OMP and Corbeau base mount seats and 405mm by 290mm for Recaro, and the Sparco frame for the three door Astra Mk5 has the 345mm by 271mm pattern.
Do I need side mounts as well as runners?
Only if it’s a side mount shell, where the runner goes under the side mounts; a base mount seat bolts straight to the runner.
Will a runner raise the seat?
Yes. Corbeau’s listing says runners bolt between the seat or its side mounts and the frame, so they add height. Allow for it with a helmet in a low car.
Do I need runners at all?
Not always. The Sparco listing says many people using a vehicle specific frame do not need them, and the Corbeau listing says many single driver competition cars leave them out. They matter when two people drive the car.
Should I order the pair or the single kit?
For one missing seat the Sparco single kit at £41.94 is the right order, and the Sparco two runner kit at £78.00 suits two seats in one order.
What we would buy
Garreth
Garreth's top tip
If the seat is on the 345mm pattern, I'd buy the Sparco single kit at £41.94 and be done. The listing says it works under OMP and Corbeau seats too, so I wouldn't go hunting for a matching brand name.
If you're changing both seats in one go, I'd take the two runner kit at £78.00 instead of two singles.
Cameron
Cameron's fitting view
I want to know the make on the driver side runner and the seat on top before I say yes. If it's a Recaro on the 405mm pattern, the Endurance Recaro kit at £95.04 is the one I'd look at.
On brands, I'd match the driver side exactly, and the bolt pattern is the other thing that counts.
Not sure which runner completes your Astra?
Tell us the driver side runner, the seat and the frame you bought. Cally, our digital receptionist, takes your details, and Cameron comes back to you with the passenger side kit.



