Ford F-150 / SVT Lightning (1999-2004) Bucket Seat and Fitting Guide
Choose seats and fitting parts for your 1999-2004 F-150 or SVT Lightning
Which fitting parts do you need for replacement seats in a 1999-2004 F-150 or SVT Lightning? Planted names SB188 for this application. Start with the pickup’s actual identity and original seating, then specify the physical side and upper assembly.
Garreth would compare a supportive recliner with a fixed bucket around the way you use the pickup.
Cameron starts with the floor attachments and original seat layout. Include any split-seat or powered-base changes in the enquiry. This guide brings the lower bracket, runners, seat options and cab checks into one parts discussion.
At a glance
- Application: Ford F150 / SVT Lightning, 1999-2004, under Planted SB188.
- Physical left: SB188DR Standard or COBRA-SB188DR Alternate.
- Physical right: SB188PA Standard or COBRA-SB188PA Alternate.
- Translate the shop’s RHD labels to the actual steering arrangement.
- Confirm the supplied runner pattern separately from the side selection.
- Assess original seat layout, centre-area attachments, driving position and restraints together.
Identify the pickup and original seating arrangement
Planted names the Ford F150 / SVT Lightning, 1999-2004, for SB188. Keep that stated application with the quotation. Send the model year, original market and cab details, with photographs of the actual mounting area. Include any earlier seat conversion or floor repair.
Ford’s 2004 SVT supplement describes a supercharged V8 Lightning with a 60/40 seat and powered driver’s adjustment. Those original seat details matter when planning separate replacement seats.
For a 2004 F-150, include the full model and body details with the enquiry; the year alone is insufficient for the fitting comparison.
Specify SB188 with the full floor-to-seat assembly
The linked SB188 is the lower vehicle bracket to assess for this named application. Match the supplied side and runner pattern before selecting the components above it. A quotation should list the seat, runner or fixed arrangement, any upper supports and the hardware required. Confirm the quantity for each front position.
Cameron would compare the original seating and bare mounting points before agreeing the combination.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Put physical left or right beside the bracket reference
Planted identifies SB188DR as Driver / Left and SB188PA as Passenger / Right. The shop labels SB188DR RHD Passenger Side and SB188PA RHD Driver Side. On an LHD pickup, the driver sits on physical left, so use the physical side to translate those labels.
Include the actual steering arrangement on the order. Have any converted vehicle’s mounting area compared separately.
| Physical side | Standard | Alternate | Position to confirm |
|---|---|---|---|
| Left | SB188DR | COBRA-SB188DR | LHD driver / RHD passenger |
| Right | SB188PA | COBRA-SB188PA | LHD passenger / RHD driver |
Match the runner to the supplied bracket and seat
Standard includes the Recaro slider pattern; Alternate substitutes the Cobra / Scheel-Mann layout. Confirm the actual supplied version separately from the shop’s side dropdown. The dropdown identifies a seating position.
The Cobra Premium runners and Sparco sliding runner kit are options to assess with the selected seat. Sparco steel side mounts are separate upper supports for an appropriate side-mounted shell. Match both interfaces: runner to lower bracket, then runner to seat or supports. Include the precise handle version and its operating clearance.
Planted distinguishes Narrow and Wide Cobra layouts, so retain the exact runner reference on the parts list.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Try a fixed bucket for support and access in the cab
The Corbeau Pro Series X, Corbeau Sprint X System 1 XL and OMP WRC-R give you fixed-back shells to compare. Try the actual version with the driver and intended use in mind. Specify its permitted supports and fixings with the lower assembly. These are seat choices for a fitting assessment, with cabin clearance still to be checked.
Garreth would try entry past the bolster as well as the seated support. The Sprint X shown here is the XL version, so compare its shell width with the driver and available cab space.
Tell us whether the pickup is used mainly for journeys, a particular build or events so the seat recommendation reflects that use.
-
From £732.00 Incl. VATFrom £610.00 Excl. VATPayPal CreditTop 10 productKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £720.00 Incl. VATFrom £600.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Compare a recliner for regular road use
For a pickup used frequently on the road, Garreth would try the Sparco R333, Cobra Daytona and Corbeau Sportline RRS. Compare cushion support at your normal driving angle. Check that the recline control remains reachable beside the door or centre area. Trial the backrest travel you need with the complete assembly in the cab.
The RRS listing supplies a pair of seats, with the fitting parts for each position to be specified separately.
-
From £449.47 Incl. VATFrom £374.56 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £599.00 Incl. VATFrom £499.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Plan split-seat, centre-area and powered-base changes together
The original seating may share more components than two individual replacement seats. Ford’s 2004 Heritage equipment table lists bench, split-bench and captain’s-chair arrangements across its specifications. Tell us which layout is actually fitted. Photograph the centre area and the attachments before choosing what will remain.
Cameron would identify any shared seat or restraint attachments before planning a split-seat conversion. Include the centre position in the assessment if you intend to retain it.
Keep a proposal to reuse an original powered base separate from the aftermarket runner choice. Have the installer assess its interfaces and connections with the exact replacement seat. SB188 alone does not establish retention of powered adjustment or other original seat equipment.
Trial the driving position and required adjustment
Check the finished position with the regular driver. Trial pedal and steering reach, the view from the seat and access to the gear selector. Check clearance at the cushion, shoulders and backrest with the door closed. Include any console, cab equipment or modifications beside and behind the seat.
Where rear seating is fitted, trial the access route and space needed by its occupants.
Measure the complete assembly with the selected seat and upper parts. There is no single installed-height change established by the SB188 reference.
Check the restraint arrangement with the proposed seat
Have the original buckle attachments and belt path assessed with the replacement seat. Include any proposed adapter and its hardware in the quotation. Check that the buckle remains accessible beside the cushion. A change to a shared original seat arrangement also needs its remaining restraint attachments assessed.
The Takata Drift II, TRS Magnum four-point and Schroth Profi 3×2 six-point are harness examples for a separate assessment of the intended use. Confirm the actual belt version, suitable anchors and routing under its instructions. Openings in a shell do not establish the rest of the installation.
-
From £274.80 Incl. VATFrom £229.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £246.00 Incl. VATFrom £205.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £444.01 Incl. VATFrom £370.01 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Trial the lower bracket before completing the installation
Check the supplied reference, physical side and pattern against the agreed parts list. Have the installer trial the bare bracket on the actual mounting points and assess repairs or earlier changes. Resolve any difference before adding the upper assembly.
Follow the exact component instructions for orientation, hardware and tightening. Trial the completed driving position, adjustment and restraint arrangement in the pickup. Check the runner operation and the required control clearances. The installer should complete the agreed checks before the vehicle is used.
Send the details for a complete F-150 or Lightning fitting recommendation
Send the year and full vehicle identity with its original market, cab and actual steering arrangement. Add photographs of the original seating and floor attachments. Tell us which positions are changing and which centre or rear-seat components you intend to retain.
Garreth can discuss the preferred seat while Cameron checks the fitting information. Include the parts you already own and the way the pickup is used.
- Named 1999-2004 F150 / SVT Lightning application and exact body details.
- Original bench, split seat or separate front-seat arrangement.
- Physical left or right, with the full SB188 reference and supplied pattern.
- Exact seat, runner or fixed arrangement, upper supports and required hardware.
- Powered-base proposals, centre-area changes and the restraint equipment to assess.
Common questions
Which pickup does this guide cover?
It follows Planted's named Ford F150 / SVT Lightning application for 1999-2004, with the original seating and actual mounting area to be compared with the supplied SB188.
What details matter for a 2004 F-150?
Send the full model and body details, original seat configuration and mounting photographs so the actual pickup can be checked against the bracket application.
Can I use the date range for a 1997 or 1998 truck?
The named SB188 listing starts at 1999, so send an earlier pickup's details for its own application check.
Does the guide cover another Lightning generation?
Use the stated 1999-2004 SVT application for this guide; another Lightning version or model year needs its own fitting check.
Which bracket is physical left?
SB188DR is Standard physical left and COBRA-SB188DR is the manufacturer's Alternate left pattern, corresponding to the driver's position on an LHD pickup.
Which bracket is physical right?
SB188PA is Standard physical right and COBRA-SB188PA is Alternate physical right, corresponding to the passenger position on an LHD pickup.
Why do the shop's driver and passenger labels differ?
The shop uses RHD position labels, while Planted's Driver / Left and Passenger / Right references describe physical sides. Put the steering arrangement and physical side beside the full reference.
Does choosing a side also select the runner pattern?
Confirm Standard or Alternate separately with the chosen runner, as the shop's side selection identifies a position.
Which pattern should I check for Cobra runners?
Keep the exact runner reference with the enquiry: Planted distinguishes Narrow and Wide Cobra layouts, and both the bracket and seat interfaces need matching.
Are runners and side supports included with SB188?
Ask for the contents to be itemised for your seat. The lower bracket, runner and side supports shown here are separate catalogue choices. Specify the hardware for the actual combination as well.
Can the original powered base be reused?
Have its exact interfaces and connections assessed with the proposed seat; the SB188 application alone does not establish powered-base or function retention.
Can part of the original split seat or centre position remain?
Include all shared seat and restraint attachments in the fitting assessment before specifying what will remain alongside an individual replacement seat.
Which fixed buckets are shown?
The examples are Corbeau Pro Series X, Corbeau Sprint X System 1 XL and OMP WRC-R, with the exact shell version, permitted supports and cab clearance still to be assessed.
Which recliners are shown?
Try the Sparco R333, Cobra Daytona and Corbeau Sportline RRS for support, accessible controls and the backrest travel you need.
Does the RRS pair include both fitting assemblies?
The listing supplies two seats, with a confirmed lower bracket, upper parts and hardware to be specified for each position.
Will the replacement seat sit lower?
Measure the finished assembly with the chosen seat and driver. The result depends on the bracket, upper supports and runner or fixed arrangement together.
Can I retain the original belt or fit a harness?
Assess the actual buckle, belt path and attachments with the proposed seat. A harness requires its own suitable anchors and routing confirmed under the exact belt's instructions for the intended use.
What do you need for a full quotation?
Send the year, vehicle and cab identity, original seating, actual steering arrangement and mounting photographs, together with the proposed seat, existing parts, centre-area plans and restraint details.
Garreth’s top tip
I would try the seat for entry and a normal driving position before committing. A fixed bucket and a supportive recliner deserve comparison against how you use the pickup. Have the preferred seat and full fitting assembly quoted together.
Cameron’s fitting view
Start with the actual original seat arrangement and mounting area. Put the physical side and complete SB188 reference beside the supplied pattern. Include any centre-position or powered-base changes when checking the complete installation.
Plan your Ford F-150 / SVT Lightning (1999-2004) seat change
Drop us an email or open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Application references: Planted physical-left F150 / SVT Lightning bracket, physical-right bracket, installation guidance, manufacturer FAQs, Ford 2004 SVT supplement and archived Ford 2004 Heritage equipment table.










