Ford Expedition (2007-2017) Bucket Seat and Fitting Guide
Choose seats and fitting parts for your 2007-2017 Expedition
Which fitting kit do you need for replacement front seats in a 2007-2017 Ford Expedition? Planted lists SB279 for this third-generation model. Start with that vehicle application, then match the physical side and supplied bracket pattern to the seat assembly.
Garreth would try a supportive recliner first for an Expedition used regularly on the road.
Cameron needs the original seating details and actual mounting arrangement. Include the steering position, body version and equipment fitted to the existing seats. The guide below sets out the lower bracket, upper parts and seat choices to discuss together.
At a glance
- Application: third-generation Ford Expedition, 2007-2017, under Planted SB279.
- Physical left: SB279DR Standard or COBRA-SB279DR Alternate.
- Physical right: SB279PA Standard or COBRA-SB279PA Alternate.
- Shop RHD position labels need translating to the actual steering arrangement.
- Confirm the supplied pattern separately from the side selection.
- Check cabin clearance, driving position, original seat equipment and restraint arrangement.
Start with the year, original seating and actual floor
Planted lists SB279 for the third-generation Ford Expedition, 2007-2017. Check that application against the vehicle’s identification and original seating before choosing a replacement. Include the original market and any changes to the floor or front seats.
Tell Cameron whether yours is the standard-length vehicle or an EL / Max. Keep that body detail with the fitting enquiry so the actual mounting area can be compared with the supplied bracket.
This guide concerns the front-seat fitting route. Rear-seat changes need their own assessment.
Use SB279 as the lower bracket in a specified assembly
The linked Planted SB279 adapts the vehicle’s mounting points to the selected aftermarket seat assembly. Choose the physical side first, then confirm the supplied runner pattern. The seat, runner and any required upper supports need specifying alongside it. Ask for the contents and quantities to be itemised for each front position.
Cameron would compare photographs of the bare mounting area with the named application before finalising the order.
-
From £222.60 Incl. VATFrom £185.50 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Match left and right before using the shop position labels
Planted calls SB279DR Driver / Left and SB279PA Passenger / Right. Our selectable SB279DR option is labelled RHD Passenger Side; SB279PA is RHD Driver Side. Those shop labels describe an RHD seating position. On an LHD Expedition, the driver’s position is physical left.
Write the actual steering arrangement and physical side beside the full bracket reference. Send details of any steering conversion or altered floor for a separate comparison.
| Physical side | Standard | Alternate | Seating position |
|---|---|---|---|
| Left | SB279DR | COBRA-SB279DR | LHD driver / RHD passenger |
| Right | SB279PA | COBRA-SB279PA | LHD passenger / RHD driver |
Confirm both runner interfaces and the bracket pattern
The manufacturer’s Standard pattern includes the Recaro slider layout. Alternate substitutes the Cobra / Scheel-Mann layout. Our side dropdown identifies a position, so ask us to confirm the actual pattern supplied with your runner choice.
Cobra Premium runners and the Sparco sliding runner kit are options to assess with the exact seat. The Sparco steel side mounts shown alongside them are upper supports for a suitable side-mounted shell. Check the runner’s lower interface to SB279 and its upper interface to the seat or supports. Include the handle version and adjustment clearance in that check.
Planted distinguishes Narrow and Wide Cobra runners; keep the precise version on the quotation.
-
From £84.00 Incl. VATFrom £70.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
Compare a fixed bucket around your intended use
The Corbeau Pro Series X, Corbeau Sprint X System 1 XL and OMP WRC-R are fixed-back shells to compare if that is the seat type you want. Assess support and entry with the actual driver. These listings are seat choices, with the full Expedition mounting arrangement still to be confirmed. Use the exact shell version’s permitted supports and hardware.
Garreth would spend time sitting in the candidate seat before committing to a fixed back for a vehicle used on long journeys.
The Sprint X listed here is the XL version. Check its width and bolster clearance in the cabin as well as the fit around the driver.
-
From £732.00 Incl. VATFrom £610.00 Excl. VATPayPal CreditTop 10 productKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £720.00 Incl. VATFrom £600.00 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Try a recliner for cushion comfort and backrest adjustment
For a regularly used Expedition, Garreth would start by trying the Sparco R333, Cobra Daytona and Corbeau Sportline RRS. Compare cushion support at your normal driving angle. Check the controls with the seat beside the door and centre area. The full backrest movement you need must remain usable in the finished installation.
The RRS listing is a pair of seats. Each position needs its own confirmed lower bracket and upper parts; have the two assemblies quoted individually.
-
From £449.47 Incl. VATFrom £374.56 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
-
From £599.00 Incl. VATFrom £499.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
List the original adjustments and equipment you need to retain
Send photographs of the existing seat base, adjustment controls and visible labels. Tell us which powered functions, heating or other seat equipment are actually fitted. Have the installer assess their connections as part of the proposed change. A replacement seat and lower bracket alone do not establish that those functions will be retained.
Keep any plan to reuse the original powered base separate from the aftermarket runner choice. Cameron needs the actual base and seat references to assess that proposal.
Include the buckle arrangement in the same enquiry, with clear photographs of its attachments.
Trial the complete assembly at the driving positions you need
Use the regular driver to check pedal reach, steering position and the view from the seat. Try the adjustment travel with the door closed. Check the cushion and shoulder area against the door trim, centre console and any equipment fitted between the seats. Leave room to reach the buckle and operate the runner handle.
If more than one person drives the Expedition, trial both people’s required settings.
Measure the finished position with the selected bracket, runner and seat together. The SB279 reference does not establish a universal lowering figure.
Assess belt routing with the chosen seat in place
Have the original belt attachments and buckle position assessed with the proposed seat. Check the belt’s route across the occupant and the room beside the cushion. Specify any required buckle adapter and its hardware as part of the installation. Keep the exact equipment references with the quotation.
The Takata Drift II, TRS Magnum four-point and Schroth Profi 3×2 six-point are harness examples for a separate assessment of the intended use. Follow the actual belt version’s instructions and confirm suitable vehicle anchors and routing with the seat. A shell’s harness openings do not establish the rest of that installation.
-
From £274.80 Incl. VATFrom £229.00 Excl. VATPayPal CreditSelect options This product has multiple variants. The options may be chosen on the product page
-
From £246.00 Incl. VATFrom £205.00 Excl. VATPayPal CreditAmazing valueSelect options This product has multiple variants. The options may be chosen on the product page
-
From £444.01 Incl. VATFrom £370.01 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Trial the bracket before completing the seat assembly
Check the supplied reference, physical side and pattern against the agreed parts list. Have the installer trial the bare bracket on the vehicle’s mounting points and assess any repairs or previous changes. Resolve any difference before assembling the seat above it.
Follow the component instructions for orientation, hardware and tightening. Trial the complete seat in the vehicle, including its adjustment and restraint arrangement. Use only the hardware specified for the actual components. The installer should complete the agreed checks before the vehicle is used.
Send the information needed for a complete Expedition recommendation
Send the model year, identification details and original market, together with the body version and actual steering arrangement. Add photographs of the original seat, floor attachments and visible references. Tell us which front positions you are changing and how the vehicle is used.
Garreth can discuss the seat choice while Cameron checks the proposed combination. Include the parts you already own so the quotation can identify what is needed.
- 2007-2017 third-generation identity, body version and original seat configuration.
- Physical left or right, with any conversion or altered mounting area.
- SB279 side reference and actual Standard or Alternate pattern.
- Exact seat, runner and upper-support references, plus required hardware.
- Existing seat equipment, buckle attachments and intended restraint arrangement.
Common questions
Which Expedition is covered?
SB279 is Planted's application for the third-generation Expedition, 2007-2017, subject to checking the actual vehicle identity, original seating and mounting area.
What should I send for an EL or Max?
Send the exact year, body version, original market and mounting-area photographs for comparison with the named application and supplied bracket.
Does this guide cover an earlier Expedition or the 2018-on model?
An earlier Expedition or a 2018-on vehicle needs its own application check outside this guide's stated 2007-2017 SB279 range.
Which bracket should an LHD driver specify?
Specify LHD, physical left and SB279DR together, as our shop labels that option RHD Passenger Side.
Which bracket is physical right?
Physical right uses SB279PA Standard or COBRA-SB279PA Alternate and is the passenger position on an LHD vehicle.
Does the side selection also choose Standard or Alternate?
Confirm the actual Standard or Alternate pattern separately with your exact runner, as the side dropdown identifies the seating position.
How do the two manufacturer patterns differ?
Standard includes the Recaro slider pattern. Alternate substitutes the Cobra / Scheel-Mann pattern. Confirm the actual runner version and supplied bracket together.
Are the runners and side supports included with SB279?
Ask for an itemised list covering the lower bracket, runner, any required side supports and hardware for your exact seat.
Can I use Cobra Premium runners?
Keep the precise Cobra runner reference on the quotation: Planted distinguishes Narrow and Wide layouts, and both the lower bracket and upper seat interfaces need matching.
Which fixed buckets are shown?
Corbeau Pro Series X, Corbeau Sprint X System 1 XL and OMP WRC-R are the examples to try with the driver, with supports and cabin clearance still to be checked.
Which recliners are shown?
Compare the Sparco R333, Cobra Daytona and Corbeau Sportline RRS for cushion support, accessible controls and the backrest movement you need.
Does the RRS pair supply both fitting assemblies?
The RRS pair supplies two seats, with the lower bracket, runner or fixed arrangement, upper parts and hardware to be specified for each position.
Will the original powered seat functions be retained?
List the equipment actually fitted and have the installer assess its connections and the proposed replacement. The lower bracket alone does not establish function retention or compatibility with an original powered base.
Will the seat sit lower?
Measure the finished assembly with the chosen seat and driver. The result depends on the bracket, runner or fixed arrangement, supports and seat together.
Can I retain the original belt or fit a harness?
Assess the actual buckle, belt path and attachments with the new seat. A harness needs suitable anchors and routing confirmed separately under its own instructions for the intended use.
What do you need for a fitting quotation?
Send the year, body version, original market, actual steering arrangement, physical side and mounting photographs. Add the seat and runner references, original equipment details, restraint plan and intended use.
Garreth’s top tip
I would try the recliners for cushion comfort and entry before settling the order. If you prefer a fixed bucket, spend time in the actual shell and check how you get in and out. Have the seat and complete fitting assembly quoted together.
Cameron’s fitting view
Put the physical side and full SB279 reference on the parts list. Confirm the supplied runner pattern, then check the complete assembly in the vehicle. Include the original equipment and buckle arrangement in that assessment.
Plan your Ford Expedition third generation (2007-2017) seat change
Drop us an email or open a chat through our contact page. For a full seat and fitting-kit recommendation, call 0115 647 8650.
Back to the Car Seat Selector guide.
Application references: Planted physical-left Expedition bracket, physical-right bracket, application guide, installation guidance and manufacturer FAQs.

![Planted Technology Ford Expedition [3rd Generation] (2007-2017) Seat Bracket](https://www.sportseats4u.co.uk/wp-content/uploads/sites/2/2026/08/SB279DR-1-300x300.jpg)








